AS ONE Corporation

• Cooling performance: -80? to -70?
• Outer dimension (mm): W 2080 x D (715 + 152) x H 1030
• Internal capacity: Approximately 507L
• Weight: Approx 200kg
• Power supply: 220V or 230V or 240V
• *Please specify the power supply at the time of your order.

• Type: Water bath
• Operating temperature range: Room temperature +5 - 80?
• Temperature settings range: -20.0 to +80.0? (*Use the external cooling unit (optional) for temperature control below the room temperature. )
• Chamber capacity: 190 x 336 x 156mm
• Jet stirring method
• Function: Program (maximum 8 steps), Float type no-water burning prevention, buzzer alarm, Abnormal heating prevention device (thermostat)
• Configuration: Sensor/K thermocouple sensor, Heater capacity/1kW
• Pump capacity: Maximum discharge quantity 10L/min, Maximum pump head 1.4m
• Timer setting range: 1 minute - 99 hours 59 minutes (1 minute unit)
• Clamp attachable width: 40mm
• Power supply: 220V?10%
• Accessories: Water tank (heat resistant ABS resin)
• External dimensions: 147 x 150 x 307mm
• Control Panel : English
• Plug: Type F(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Highest temperature (?): 500
• Plate size (mm): 400 x 300
• Body material: Stainless steel (SUS304, SUS430 for bottom plate only)
• Plate material: Stainless steel (SUS410) + ceramic coating
• Size/( ) includes protrusion: 555 x 340 (353.5) x 118mm
• Heater capacity: Sheathed heater 3800W
• Temperature controller: PID control
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)
• Safety device: Overcurrent protection, excessive temperature rise prevention
• Power supply: Single phase 230V?5%
• Power cord: 2.5m
• Weight: 26kg
• Withstand load: 10kg
• Chemical top board
• Model number: HPRH-4030
• Country of origin: Japan
• Control Panel : English

• inner size: 335 x 225 x 175 mm
• Material: Main body / steel plate (melamine baking coating), interior / aluminum, top board / steel chrome plating
• Weight: 7.3 kg
• Nagayoshi power cord: 1.8 m2P
• power supply: 220V?6%
• Model Number: DM-5
• external dimension (mm): 427 x 246 x 372
• Bactericidal lamp: 10 W (top) lamp
• * When you open the door, the sterilization lamp turns off.
• Country of origin: Japan
• Control Panel : N/A
• Display Sticker : Japanese
• Plug : Type D(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• inner size: 435 x 274 x 200 mm
• Material: Main body / steel plate (melamine baking coating), interior / aluminum, top board / steel chrome plating
• Weight: 10 kg
• Nagayoshi power cord: 1.8 m2P
• power supply: 220V?6%
• Model Number: DM-90
• external dimension (mm): 522 x 296 x 423
• Bactericidal lamp: 15 W (Top and Bottom) 2 lights
• * When you open the door, the sterilization lamp turns off.
• Country of origin: Japan
• Control Panel : N/A
• Display Sticker : Japanese
• Plug : Type D(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Bactericidal lamps: 15 W and 4 lamps (Two upper and lower lights)
• Standard white coat: 7 to 10 pieces
• The hour meter has a 60 minute timer
• inner size: Top / 810 x 485 x 1250 mm, lower / 810 x 485 x 160 mm
• Weight: About 64.5 kg
• Wavelength: 253.7 nm
• Dose: Minimum / 90 ?W, maximum / 450 ?W
• power supply: 220V?6%(switching type)
• Nagayoshi power cord: 2.8 m2P
• Accessories: A shelf network, 1 piece, earthquake resistant metal bracket
• Model number: A1-G
• Size (mm): 880 x 515 x 1790
• * When you open the door, the sterilization lamp turns off.
• Country of origin: Japan
• Control Panel : N/A
• Plug: Type D(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Bactericidal lamps: 15 W and 2 lamps (upper and lower 1 lamp)
• Standard white coat: 4 to 7 pieces
• inner size: Top / 385 x 485 x 1250 mm, lower / 385 x 485 x 160 mm
• Weight: About 37.5 kg
• Wavelength: 253.7 nm
• The hour meter has a 60 minute timer
• Dose: Minimum / 90 ?W, maximum / 450 ?W
• power supply: 220V?6%(switching type)
• Nagayoshi power cord: 2.8 m2P
• Accessories: A shelf network, 1 piece, earthquake resistant metal bracket
• Model number: AS1-G
• Size (mm): 455 x 515 x 1790
• * When you open the door, the sterilization lamp turns off.
• Country of origin: Japan

• Model number: AS800
• Item to be measured: pH, ORP, ?
• Measurement range: pH/-2.000 to +19.999pH, ORP/+/- 1999.9mV, Temperature/-10 to +110?
• Resolution: pH/0.001pH, ORP/0.1mV, Temperature/0.1?
• Accuracy: pH/+/- 0.002pH, ORP/+/- 0.03% (FS), Temperature/+/- 0.4?
• Memory: 600 data
• Interface: RS232C
• Power supply: 100-240VAC 50/60Hz
• Size: 160 x 190 x 70mm
• Weight: 880g
• Accessories: pH/temperature sensor 201T-M (pH/0 - 14, Temperature/0 - 80?) x 1, high precision pH sensor 2503-C (pH/0 - 14) x 1, Temperature sensor MP500 (temperature/-10? to +110?) x 1, pH standard liquid (pH4.01, 6.86, 9.18) x 1, electrode stand x 1, RS232C cable x 1, communication software x 1
• Rack top
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Outer dimension (mm): 599 x 658 x 1255
• Inner dimension (mm): 549 x 630 x 1030
• Reaching humidity: 1%RH (due to humidity sensor error, the humidity display may not match even when
• the desired humidity has been reached. )
• Humidity setting range: 1 - 50%RH
• Humidity control range: 1% RH*to chamber humidity (*Humidity control range is reference values at no internal load, outdoor environment 25?, 60%RH. (The values vary depending on the external conditions). )
• Dehumidification system: Absorption dehumidifying, regeneration repeat operation
• Humidity sensor: Capacitance type
• Humidity sensor accuracy: ?2%RH
• Operating environment temperature: 5 - 35?
• Capacity: 388L
• Shelf board dimensions: 555 x 490mm
• Material: Body/stainless steel (SUS304) hairline finish, Shelf board/stainless steel (SUS430), Front window/glass
• Power supply: 220V code length: Approx 2m
• Maximum power consumption: 290W
• Average power consumption: 31W/h
• Weight: 83kg
• Caster: f75mm PU (polyurethane)
• Accessories: Shelf board x 3
• Made of stainless steel, ultra low humidity, ESD correspondence
• Model number: SDMX-400
• Control Panel : Japanese
• Plug: Type G(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Outer dimension (mm): 599 x 658 x 1785
• Inner dimension (mm): 549 x 630 x 1560
• Reaching humidity: 1%RH (due to humidity sensor error, the humidity display may not match even when the desired humidity has been reached. )
• Humidity setting range: 1 - 50%RH
• Humidity control range: 1% RH*to chamber humidity (*Humidity control range is reference values at no internal load, outdoor environment 25?, 60%RH. (The values vary depending on the external conditions). )
• Dehumidification system: Absorption dehumidifying, regeneration repeat operation
• Humidity sensor: Capacitance type
• Humidity sensor accuracy: ?2%RH
• Operating environment temperature: 5 - 35?
• Capacity: 580L
• Shelf board dimensions: 555 x 490mm
• Material: Body/stainless steel (SUS304) hairline finish, Shelf board/stainless steel (SUS430), Front window/glass
• Power supply: 220V code length: Approx 2m
• Maximum power consumption: 290W
• Average power consumption: 31W/h
• Weight: 118kg
• Caster: f75mm PU (polyurethane)
• Accessories: Shelf board x 5
• Made of stainless steel, ultra low humidity, ESD correspondence
• Model number: SDMX-600
• Control Panel : Japanese
• Plug: Type G(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Outer dimension (mm): 1200 x 658 x 1840
• Inner dimension (mm): 1150 x 630 x 1560
• Reaching humidity: 1%RH (due to humidity sensor error, the humidity display may not match even when the desired humidity has been reached. )
• Humidity setting range: 1 - 50%RH
• Humidity control range: 1% RH*to chamber humidity (*Humidity control range is reference values at no internal load, outdoor environment 25?, 60%RH. (The values vary depending on the external conditions). )
• Dehumidification system: Absorption dehumidifying, regeneration repeat operation
• Humidity sensor: Capacitance type
• Humidity sensor accuracy: ?2%RH
• Operating environment temperature: 5 - 35?
• Capacity: 1160L
• Shelf board dimensions: 1157 x 490mm
• Material: Body/stainless steel (SUS304) hairline finish, Shelf board/stainless steel (SUS430), Front window/glass
• Power supply: 220V code length: Approx 2m
• Maximum power consumption: 540W
• Average power consumption: 52W/h
• Weight: 176kg
• Caster: f125mm PU (polyurethane)
• Accessories: Shelf board x 5
• Made of stainless steel, ultra low humidity, ESD correspondence
• Model number: SDMX-1200
• Control Panel : Japanese
• Plug: Type G(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• SBS standard plate supported
• Temperature distribution accuracy: +/- 0.5? or less
• Temperature control system: PID control
• Alarm time setting range: 1 minute - 99 hours 59 minutes
• Temperature rise time (20? -> 70?): 25 minutes or less
• Number of microplates allowed for installation: 2 sheets
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Weight: 4.0kg
• Temperature adjustment range (?): Room temperature +5 - 70
• Outer dimension (mm): 280 x 270 x 140
• Model number: MyBL-P2
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• SBS standard plate supported
• Temperature distribution accuracy: +/- 0.5? or less
• Temperature control system: PID control
• Alarm time setting range: 1 minute - 99 hours 59 minutes
• Amplitude: 2mm
• Temperature rise time (20? -> 70?): 25 minutes or less
• Number of microplates allowed for installation: 2 sheets
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Size: 280 x 270 x 140mm
• Weight: 7.0kg
• Temperature adjustment range (?): Room temperature +5 - 70
• Rotation speed (rpm): 100 - 1200
• Front lab
• Model number: MyBL-P2S
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Electrostatic specification, auto dry
• Material: Body/PMMA (acrylic), Frame/aluminum
• Door: with draw latch
• Weight: 5.8kg
• Dehumidification system: Using solid high polymer electrolyte membrane, H2O electrolytic discharge
• Humidity control range: To 25% (varies depending on the surrounding environment. )
• Dehumidifying element area: 30 x 30mm
• Power supply: AC100-240V 50/60Hz
• Power consumption: 3W
• Power cord length: Approximately 1.8m (2P plug)
• Outer dimensions: 432 x 317 x 338mm
• Inner dimension: 370 x 260 x 272mm
• Model number: Auto dry PLSE
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Electrostatic specification, auto dry
• Material: Body/PMMA (acrylic), Frame/aluminum
• Door: with draw latch
• Weight: 5.9kg
• Shelf board: Size/270 x 257mm, Material/styrol, withstand load/about 2kg/stage
• Dehumidification system: Using solid high polymer electrolyte membrane, H2O electrolytic discharge
• Humidity control range: To 25% (varies depending on the surrounding environment. )
• Dehumidifying element area: 30 x 30mm
• Power supply: AC100-240V 50/60Hz
• Power consumption: 3W
• Power cord length: Approximately 1.8m (2P plug)
• Outer dimensions: 334 x 317 x 436mm
• Inner dimension: 272 x 260 x 370mm
• Accessories: Shelf board x 1
• Model number: Auto dry PHSE
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Auto dry type
• Material: Body, door/PMMA (acrylic), Door packing/latex sponge + neoprene rubber coating, Drawer/PS (polystyrene)
• Dehumidification system: H2O electric decomposition discharge (using solid high polymer electrolyte membrane)
• Reaching humidity: 25%RH (with no internal load, depending on the usage environment)
• Internal dimensions of drawers: 113 x 494 x 68mm
• Shelf board interval: 85mm
• Shelf board load capacity: Approx 1.5kg
• Total withstand load: Approx 6kg
• Door specification: Draw latch 3 places
• Rubber foot: 25 x 20mm
• Power supply: AC100-240V 50/60Hz 3W
• Power cord length: 2m (2P plug)
• Weight: 9.5kg
• Model number: OH-PB
• Auto dry type
• Size (mm): 270 x 568 x 419 (*The size excludes projections, dry unit. )
• UT-Lab.
• Accessories: Drawer x 8 pieces, Middle partition plate x 8 sheets, Analog type temperature and humidity meter x 1
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Temperature settings range: Room temperature +5? - 180?
• Analog
• Temperature sensor: Resistance thermometer (Pt100O)
• Material: Control unit cover/PP (Polypropylene), Water tank/Stainless steel (SUS304), Heater/Stainless steel (SUS304) nickel plating
• Heater capacity: 750W
• Power supply: 220V?10%
• Weight: Approx 1.5kg
• Safety device: Circuit breaker, bimetal thermostat
• External dimensions: 220 x 278 x 124mm
• Chamber dimensions: f208 x 123mm
• Temperature control system: Microcomputer type proportional control
• Water tank shape: Round
• Country of origin: Japan
• Control Panel : English
• Plug: Type F(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Highest temperature (?): 350
• Plate size (mm): 250 x 250
• Temperature settings range: Room temperature +10 - 350?
• Temperature settings: Analog scale method (scale width 50?)
• Temperature distribution width: 4? (*temperature distribution width is indoor environment 25? (no wind, no load, using internal sensor), Reference value when setting to 200?. )
• Temperature control system: Microcomputer type proportional control system
• Temperature display system: ?
• Internal temperature sensor: K class thermocouple
• Safety device: Abnormal heating prevention device (thermostat), overcurrent
• Heater capacity: 1000W
• Additional function: ?
• Plate material: Aluminum (ceramic coating)
• Size: 320 x 360 x 101mm
• Power supply: 220V?10%
• Power cord length: Approx 2m
• Country of origin: Japan
• Control Panel : English
• Plug: Type F(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Highest temperature (?): 350
• Plate size (mm): 170 x 170
• Temperature settings range: Room temperature +10 - 350?
• Temperature settings: Analog scale method (scale width 50?)
• Temperature distribution width: 4? (*temperature distribution width is indoor environment 25? (no wind, no load, using internal sensor), Reference value when setting to 200?. )
• Temperature control system: Microcomputer type proportional control system
• Temperature display system: ?
• Internal temperature sensor: K class thermocouple
• Safety device: Abnormal heating prevention device (thermostat), overcurrent
• Heater capacity: 680W
• Additional function: ?
• Plate material: Aluminum (ceramic coating)
• Size: 240 x 280 x 101mm
• Power supply: 220V?10%
• Power cord length: Approx 2m
• Country of origin: Japan
• Control Panel : English
• Plug: Type F(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Type: High viscosity supported, analog
• Magnet: Rare earth neodium magnet
• Main unit size: 224 x 285 x 58mm
• Plate size: 193 x 213mm
• Rotation speed setting system: Volume setting
• Rotation speed display system: Scale display
• Motor: High output DC brush motor
• Magnet strength: 0.45T
• Material: Body/heat-resistant ABS, Plate/stainless steel (SUS304)
• Power supply: Power 100 - 240VAC 50/60Hz (including AC adapter), power cord approximately 2m
• Weight: Approx 1.5kg
• Model number: RP-1AN
• Rotation speed (rpm): MAX about 1500
• Stirred capacity (mL): 50 - 10000
• *It is not suitable to use while heating liquid. *Stirrer bar is not included in the package.
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)