AS ONE Corporation

• Model number: VME-525
• Tube holder for f25mm x 4
• The highly sensitive touch switch and vibration with a low center of gravity reduce your wrist fatigue.
• The continuous mode has a secure design in which the limiter works at 1500rpm(you can set up to 3000rpm by canceling the limiter).
• The soft platform can be manufactured according to test tubes/tubes to be used.
• Various volumes/sizes can be handled by replacing the platform with a tube holder sold separately.

• Material: PP (Polypropylene)
• Hole diameter x depth: f70 x 91mm
• Model number: FT010 13
• Conform: 100mL (for 3 pieces)
• Size (mm): 310 x 100 x 100
• It can store and move several flasks at the same time.
• Possible to write name of contents on supplied name tags.

• Material: PP (Polypropylene)
• Hole diameter x depth: f70 x 91mm
• Model number: FT010 34
• Conform: 100mL (for 12 pieces)
• Size (mm): 384 x 265 x 98
• It can store and move several flasks at the same time.
• Possible to write name of contents on supplied name tags.

• Material: PP (Polypropylene)
• Hole diameter x depth: f98 x 122mm
• Model number: FT025 12
• Conform: 300mL (for 2 pieces)
• Size (mm): 280 x 125 x 130
• It can store and move several flasks at the same time.
• Possible to write name of contents on supplied name tags.

• Material: PP (Polypropylene)
• Hole diameter x depth: f121 x 128mm
• Model number: FT050 12
• Conform: 500mL (for 2 pieces)
• Size (mm): 360 x 146 x 135
• It can store and move several flasks at the same time.
• Possible to write name of contents on supplied name tags.

• Material: PP (Polypropylene)
• Hole diameter x depth: f148 x 156mm
• Model number: FT100 12
• Conform: 1000mL (for 2 pieces)
• Size (mm): 415 x 192 x 165
• It can store and move several flasks at the same time.
• Possible to write name of contents on supplied name tags.

• Model number: 958135010
• Dispensing set 50mL
• Accuracy (standard deviation/repeatability): Dispenser: 0.6%/0.2%, Stepper: 0.6%/0.2%
• Range: 1-500mL
• Resolution: <2?L
• Main unit size: 320 x 80 x 63mm
• Body weight: 660g
• Controller size: 55 x 130 x 110mm
• Controller weight: 230g
• Repeat: 1 - 9999 times
• Interval: 1 - 9999 seconds
• Stepper: 10 step
• Memory function: 9 sets
• Material: Piston/PTFE (fluorine resin), Cylinder, valve seat/borosilicate glass 3.3, Valve block/ECTFE (fluorine resin)
• Accessories: Connection adapter (A32, A38, S40) x 1 piece each, Suction tube x 1, Drain part for dispensing or titration x 1, AC adapter, Bottle 2.5L, Connection cable
• It is superior in accuracy and reproducibility.
• Accurate dispensing and titration are possible according to chemicals.
• Wetted parts can be easily disassembled and cleanable?autoclavable.
• It can be connected to PC via USB.

• Model number: 958232010
• Titration set 20mL
• Accuracy (standard deviation/repeatability): 0.2%/0.07%
• Range: 0.1-200mL
• Resolution: < 1?L
• Main unit size: 320 x 80 x 63mm
• Body weight: 660g
• Controller size: 55 x 130 x 110mm
• Controller weight: 230g
• Repeat: 1 - 9999 times
• Interval: 1 - 9999 seconds
• Stepper: 10 step
• Memory function: 9 sets
• Material: Piston/PTFE (fluorine resin), Cylinder, valve seat/borosilicate glass 3.3, Valve block/ECTFE (fluorine resin)
• Accessories: Connection adapter (A32, A38, S40) x 1 piece each, Suction tube x 1, Drain part for dispensing or titration x 1, AC adapter, Bottle 2.5L, Connection cable
• It is superior in accuracy and reproducibility.
• Accurate dispensing and titration are possible according to chemicals.
• Wetted parts can be easily disassembled and cleanable?autoclavable.
• It can be connected to PC via USB.

• Model number: S
• Material: PP (Polypropylene)
• Thickness: 0.05mm
• Size: 300 x 400mm
• Quantity: 1 bag (100 sheets)
• *-01, -02, and -03 are available for samples.
• It is autoclavable(121??20minutes).

• Model number: M
• Material: PP (Polypropylene)
• Thickness: 0.05mm
• Size: 500 x 700mm
• Quantity: 1 bag (100 sheets)
• *-01, -02, and -03 are available for samples.
• It is autoclavable(121??20minutes).

• Model number: L
• Material: PP (Polypropylene)
• Thickness: 0.05mm
• Size: 640 x 890mm
• Quantity: 1 bag (100 sheets)
• *-01, -02, and -03 are available for samples.
• It is autoclavable(121??20minutes).

• Material: Wax paper
• Compatible tube diameter: f10 - 12mm
• Size: 134 x 134 x 47mm
• Quantity: 24 pieces
• Number of tube setting (pieces): 81 (9 x 9)
• Model number: 61000281
• Size meets global standard and fits variety of rack systems.
• It has durability under very low temperatures.

• Material: Wax paper
• Compatible tube diameter: f10 - 12mm
• Size: 134 x 134 x 47mm
• Quantity: 24 pieces
• Number of tube setting (pieces): 100 (10 x 10)
• Model number: 61000200
• Size meets global standard and fits variety of rack systems.
• It has durability under very low temperatures.

• Housing material: PP (polypropylene)
• Shape: inlet / main arc lock, exit / loose slip
• Heat resistance: 45 ? C
• Effective filtration area: 0.65 cm2
• Amount remaining: < 25 ?L
• Pressure: 690 kPa
• Quantity: 100 pieces
• Model number: RJF 1322 NH
• Membrane material: PTFE (ethylene tetrafluoride)
• pore size (?m): 0.22
• Diameter (f mm): 13
• It is high pressure resistance types without worry about burst and leak.

• Housing material: PP (Polypropylene)
• Shape: Inlet/female luer lock, Outlet/male luer slip
• Allowable temperature limit: 45?
• Effective filtering area: 4.4cm2
• Residual liquid quantity: <100?L
• Pressure resistance: 1000kPa
• Quantity: 100 pcs
• Model number: RJF3222NH
• Membrane material: PTFE (tetrafluoroethylene)
• Pore diameter (?m): 0.22
• Diameter (fmm): 32
• It is high pressure resistance types without worry about burst and leak.

• Housing material: PP (polypropylene)
• Shape: inlet / main arc lock, exit / loose slip
• Heat resistance: 45 ? C
• Effective filtration area: 0.65 cm2
• Amount remaining: < 25 ?L
• Pressure: 690 kPa
• Quantity: 100 pieces
• Model number: RJF 1345 NH
• Membrane material: PTFE (ethylene tetrafluoride)
• pore size (?m): 0.45
• Diameter (f mm): 13
• It is high pressure resistance types without worry about burst and leak.

• Housing material: PP (Polypropylene)
• Shape: Inlet/female luer lock, Outlet/male luer slip
• Allowable temperature limit: 45?
• Effective filtering area: 4.4cm2
• Residual liquid quantity: <100?L
• Pressure resistance: 1000kPa
• Quantity: 100 pcs
• Model number: RJF3245NH
• Membrane material: PTFE (tetrafluoroethylene)
• Pore diameter (?m): 0.45
• Diameter (fmm): 32
• It is high pressure resistance types without worry about burst and leak.

• Housing material: PP (polypropylene)
• Shape: inlet / main arc lock, exit / loose slip
• Heat resistance: 45 ? C
• Effective filtration area: 0.65 cm2
• Amount remaining: < 25 ?L
• Pressure: 690 kPa
• Quantity: 100 pieces
• Model number: RJN 1322 NH
• Membrane material: Nylon
• pore size (?m): 0.22
• Diameter (f mm): 13
• It is high pressure resistance types without worry about burst and leak.

• Housing material: PP (Polypropylene)
• Shape: Inlet/female luer lock, Outlet/male luer slip
• Allowable temperature limit: 45?
• Effective filtering area: 4.4cm2
• Residual liquid quantity: <100?L
• Pressure resistance: 1000kPa
• Quantity: 100 pcs
• Model number: RJN3222NH
• Membrane material: Nylon
• Pore diameter (?m): 0.22
• Diameter (fmm): 32
• It is high pressure resistance types without worry about burst and leak.

• Housing material: PP (polypropylene)
• Shape: inlet / main arc lock, exit / loose slip
• Heat resistance: 45 ? C
• Effective filtration area: 0.65 cm2
• Amount remaining: < 25 ?L
• Pressure: 690 kPa
• Quantity: 100 pieces
• Model number: RJN 1345 NH
• Membrane material: Nylon
• pore size (?m): 0.45
• Diameter (f mm): 13
• It is high pressure resistance types without worry about burst and leak.