AS ONE Corporation
Constant-Temperature Drying Oven (Program Type, Forced Convection System) Without Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 300 x 327 x 300
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 20 minutes
• Temperature distribution (JTM K05): ?3 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 10 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1100W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• Tana pitch number of step mm: 35 pitch 6 stages
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 400 x 447 x 610mm
• Inner capacity: about 25L
• Weight: about 25kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 11.5 A
• shelf board, load tolerance: 15kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) Without Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 450 x 447 x 450
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 45 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 23 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1300W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/10 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 550 x 567 x 760mm
• Inner capacity: about 91L
• Weight: about 40kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 13.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) Without Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 600 x 497 x 500
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 55 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1.5 ?C (at 270 ?C)
• Temperature gradient (JIS): 25 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1400W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/11 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 2 pieces
• Outer dimensions: 700 x 617 x 810mm
• Inner capacity: about 150L
• Weight: about 50kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 14.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Timer Type, Forced Convection System) With Window (Left Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 300 x 327 x 300
• Door: Left
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 20 minutes
• Temperature distribution (JTM K05): ?3 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 10 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Timer specification ? ON timer, OFF timer, SV start, ON/OFF timer
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1100W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• Tana pitch number of step mm: 35 pitch 6 stages
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 400 x 447 x 610mm
• Inner capacity: about 25L
• Weight: about 25kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 11.5 A
• shelf board, load tolerance: 15kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Timer Type, Forced Convection System) With Window (Left Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 450 x 447 x 450
• Door: Left
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 45 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 23 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Timer specification ? ON timer, OFF timer, SV start, ON/OFF timer
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1300W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/10 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 550 x 567 x 760mm
• Inner capacity: about 91L
• Weight: about 40kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 13.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Timer Type, Forced Convection System) With Window (Left Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 600 x 497 x 500
• Door: Left
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 55 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1.5 ?C (at 270 ?C)
• Temperature gradient (JIS): 25 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Timer specification ? ON timer, OFF timer, SV start, ON/OFF timer
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1400W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/11 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 2 pieces
• Outer dimensions: 700 x 617 x 810mm
• Inner capacity: about 150L
• Weight: about 50kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 14.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Timer Type, Forced Convection System) With Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 300 x 327 x 300
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 20 minutes
• Temperature distribution (JTM K05): ?3 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 10 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Timer specification ? ON timer, OFF timer, SV start, ON/OFF timer
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1100W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• Tana pitch number of step mm: 35 pitch 6 stages
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 400 x 447 x 610mm
• Inner capacity: about 25L
• Weight: about 25kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 11.5 A
• shelf board, load tolerance: 15kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to Choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enable high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Timer Type, Forced Convection System) With Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 450 x 447 x 450
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 45 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 23 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Timer specification ? ON timer, OFF timer, SV start, ON/OFF timer
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1300W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/10 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 550 x 567 x 760mm
• Inner capacity: about 91L
• Weight: about 40kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 13.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Timer Type, Forced Convection System) With Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 600 x 497 x 500
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 55 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1.5 ?C (at 270 ?C)
• Temperature gradient (JIS): 25 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Timer specification ? ON timer, OFF timer, SV start, ON/OFF timer
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1400W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/11 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 2 pieces
• Outer dimensions: 700 x 617 x 810mm
• Inner capacity: about 150L
• Weight: about 50kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 14.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature manaement, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) With Window (Left Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 300 x 327 x 300
• Door: Left
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 20 minutes
• Temperature distribution (JTM K05): ?3 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 10 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1100W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• Tana pitch number of step mm: 35 pitch 6 stages
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 400 x 447 x 610mm
• Inner capacity: about 25L
• Weight: about 25kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 11.5 A
• shelf board, load tolerance: 15kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) With Window (Left Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 450 x 447 x 450
• Door: Left
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 45 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 23 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1300W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/10 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 550 x 567 x 760mm
• Inner capacity: about 91L
• Weight: about 40kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 13.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) With Window (Left Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 600 x 497 x 500
• Door: Left
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 55 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1.5 ?C (at 270 ?C)
• Temperature gradient (JIS): 25 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1400W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/11 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 2 pieces
• Outer dimensions: 700 x 617 x 810mm
• Inner capacity: about 150L
• Weight: about 50kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 14.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) With Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 300 x 327 x 300
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 20 minutes
• Temperature distribution (JTM K05): ?3 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 10 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1100W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• Tana pitch number of step mm: 35 pitch 6 stages
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 400 x 447 x 610mm
• Inner capacity: about 25L
• Weight: about 25kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 11.5 A
• shelf board, load tolerance: 15kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operayion.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature manaegement, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) With Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 450 x 447 x 450
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 45 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 23 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1300W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/10 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 550 x 567 x 760mm
• Inner capacity: about 91L
• Weight: about 40kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 13.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) With Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 600 x 497 x 500
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 55 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1.5 ?C (at 270 ?C)
• Temperature gradient (JIS): 25 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1400W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/11 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 2 pieces
• Outer dimensions: 700 x 617 x 810mm
• Inner capacity: about 150L
• Weight: about 50kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 14.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Steel Rack
AS ONE Corporation
• Material: Steel
• Withstand load: with bis fixed/100kg/sheet, with hook used/50kg/sheet
• Model number: L21999B
• Size (mm): 600 x 400 x 750
• Color: Black
• It is easy to locate and move intermediate shelf by using hooks.
$0
Steel Rack
AS ONE Corporation
• Material: Steel
• Withstand load: with bis fixed/100kg/sheet, with hook used/50kg/sheet
• Model number: L21999W
• Size (mm): 600 x 400 x 750
• Color: White
• It is easy to locate and move intermediate shelf by using hooks.
$0
Steel Rack
AS ONE Corporation
• Material: Steel
• Withstand load: with bis fixed/100kg/sheet, with hook used/50kg/sheet
• Model number: H21999B
• Size (mm): 600 x 400 x 1200
• Color: Black
• It is easy to locate and move intermediate shelf by using hooks.
$0
Steel Rack
AS ONE Corporation
• Material: Steel
• Withstand load: with bis fixed/100kg/sheet, with hook used/50kg/sheet
• Model number: H21999W
• Size (mm): 600 x 400 x 1200
• Color: White
• It is easy to locate and move intermediate shelf by using hooks.
$0
Large Dual-Frequency Ultrasonic Cleaner 450 x 370 x 495mm
AS ONE Corporation
• Model number: MUC-38 D
• external dimension (mm): 450 x 370 x 495
• tank inner size (mm): 400 x 320 x 300
• Tank capacity: Approximately 38 L
• Output: 720 W
• material: Main body / stainless steel (SUS430), tank / stainless (SUS304)
• Oscillation circuit: A PLL automatic tracking system
• Oscillator: BLT (Lancin bolt)
• The oscillation frequency is 28 kHz and 40 kHz
• Frequency switching: 28 kHz alone, 40 kHz alone, 28/40 kHz alternating
• Timer: 1 to 60 minutes per minute
• Safety function: Overcurrent prevention and overload prevention
• power supply: AC100V 50 / 60Hz
• Nagatoshi power cord: 3 m (3P Plug)
• Drainage: Manual drainage valve formula (Diameter Rc 3/4)
• Weight: 23 kg
• Accessories: Cleaning basket
• * Format Specification Number: No.-11002
• * The size is Dimensions excluding drainage valves.
• Bolted Langevin type transducer performs powerful cleaning.
• In addition to high output power, it comes with double frequency switching function (alternate operation, independent operation), detailed sections can be cleaned.
• Timer is digital subtraction display and can be checked remaining time.
• Temperature, time and program content will be stored even when power is off.
$0