AS ONE Corporation

Dry Boy

Dry Boy

AS ONE Corporation

• External dimensions (mm): 350 x 453 x 800
• Inner dimensions (mm): 324 x 398 x 409 (? 2 rooms)
• Material: Frame/Steel Plate melamine baking coating, Front/Glass
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolyte membrane
• Humidity: 25 %RH (With no load inside, due to environment used)
• Dehumidifying element film area: 30 x 30mm
• Power supply: AC100V 50/60 Hz 3W
• Weight: 18 kg
• Accessories: 2 pieces x 2 pieces, Key x shelf board, Digital Humidity Monitor (THA-01M), triangle Tap
$0
Dry Boy

Dry Boy

AS ONE Corporation

• External dimensions (mm): 350 x 863 x 400
• Inner dimensions (mm): 324 x 398 x 409 (? 2 rooms)
• Material: Frame/Steel Plate melamine baking coating, Front/Glass
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolyte membrane
• Humidity: 25 %RH (With no load inside, due to environment used)
• Dehumidifying element film area: 30 x 30mm
• Power supply: AC100V 50/60 Hz 3W
• Weight: 17 kg
• Accessories: 2 pieces x 2 pieces, Key x shelf board, Digital Humidity Monitor (THA-01M), triangle Tap
$0
Gas Substitution Desiccator

Gas Substitution Desiccator

AS ONE Corporation

• Model number: DG-1N
• Outer dimension (mm): 450 x 450 x 900
• Inner dimension (mm): 406 x 400 x 740
• Material: Steel plate melamine baking coating
• Shelf board load capacity: Approximately 30kg/board
• Weight: 30kg
• Gas introduction, discharge port: Introduction/outer diameter f6mm tube for quick fittings, Discharge/outer diameter f12mm tube for quick joint
• Accessories: Shelf board x 3, Low humidity digital thermo-hygrometer (THI-HP) x 1 piece
• DG-3N?4N:Top and bottom is separated. Possible to replace with gas into only upper or upper and lower cabinet(only lower cabinet is not available).
• DG-2N?4N is full open type which does not have vertical divider in center of door, so wide storage object can be taken in and out easily.
• To DG-1N?2N, optional casters can be attached.
$0
Gas Substitution Desiccator

Gas Substitution Desiccator

AS ONE Corporation

• Model number: DG-2N
• Outer dimension (mm): 900 x 450 x 900
• Inner dimension (mm): 856 x 400 x 740
• Material: Steel plate melamine baking coating
• Shelf board load capacity: Approximately 30kg/board
• Weight: 50kg
• Gas introduction, discharge port: Introduction/outer diameter f6mm tube for quick fittings, Discharge/outer diameter f12mm tube for quick joint
• Accessories: Shelf board x 3, Low humidity digital thermo-hygrometer (THI-HP) x 1 piece
• DG-3N?4N:Top and bottom is separated. Possible to replace with gas into only upper or upper and lower cabinet(only lower cabinet is not available).
• DG-2N?4N is full open type which does not have vertical divider in center of door, so wide storage object can be taken in and out easily.
• To DG-1N?2N, optional casters can be attached.
$0
Gas Substitution Desiccator

Gas Substitution Desiccator

AS ONE Corporation

• Model number: DG-3N
• Outer dimension (mm): 600 x 650 x 1800
• Inner dimension (mm): 536 x 600 x 675 x 2 rooms
• Material: Steel plate melamine baking coating
• Shelf board load capacity: Approximately 30kg/board
• Weight: 104kg
• Gas introduction, discharge port: Introduction/outer diameter f6mm tube for quick fittings, Discharge/outer diameter f12mm tube for quick joint
• Accessories: Shelf board x 4, Low humidity digital thermo-hygrometer (THI-HP) x 2 pieces
• DG-3N?4N:Top and bottom is separated. Possible to replace with gas into only upper or upper and lower cabinet(only lower cabinet is not available).
• DG-2N?4N is full open type which does not have vertical divider in center of door, so wide storage object can be taken in and out easily.
• To DG-1N?2N, optional casters can be attached.
$0
Gas Substitution Desiccator

Gas Substitution Desiccator

AS ONE Corporation

• Model number: DG-4N
• Outer dimension (mm): 1200 x 650 x 1800
• Inner dimension (mm): 1136 x 600 x 675 x 2 rooms
• Material: Steel plate melamine baking coating
• Shelf board load capacity: Approximately 30kg/board
• Weight: 150kg
• Gas introduction, discharge port: Introduction/outer diameter f6mm tube for quick fittings, Discharge/outer diameter f12mm tube for quick joint
• Accessories: Shelf board x 4, Low humidity digital thermo-hygrometer (THI-HP) x 2 pieces
• DG-3N?4N:Top and bottom is separated. Possible to replace with gas into only upper or upper and lower cabinet(only lower cabinet is not available).
• DG-2N?4N is full open type which does not have vertical divider in center of door, so wide storage object can be taken in and out easily.
• To DG-1N?2N, optional casters can be attached.
$0
Constant-Low-Temperature Water Circulator -30 to 80? 180W

Constant-Low-Temperature Water Circulator -30 to 80? 180W

AS ONE Corporation

• Model number: LTB - 125a
• Type: -30 to +80
• Size (mm): 180
• Temperature settings, display system: Key input system (0.1?), PV, SV digital 2 stage rack display
• Temperature control system: Microcomputer type PID control
• Temperature sensor: Resistance thermometer (Pt100O)
• Temperature accuracy: ?1.0? (conditions may vary)
• Heater: 1kW
• External dimensions: 250 x 435 x 630mm
• Chamber dimensions: 136 x 239 x 150mm
• Effective opening dimensions: 133 x 116 x 150mm
• Tank capacity: Approximately 4L
• Material: Water tank, cooling coil/stainless steel (SUS304)
• Type of liquid used: Pure water, freshwater, ethylene glycol, ethyl alcohol
• Refrigerant: R-404A
• Circulation pump: Maximum flow 9.6L/min, maximum head 2.8m
• Circulating nozzle outer diameter: f11mm (adaptive tube inner diameter f9mm)
• Safety device: Self-diagnosis function (upper or lower limit temperature abnormality detection, float type no-water burning prevention, sensor abnormal, heater disconnection, electrical leakage/overcurrent breaker, frozen machine overload relay)
• External input, external output: External temperature sensor input terminal (for Pt100), Analog output meter for thermometer (1?5V), Alarm output terminal (DC12 - 17V, 20mA)
• Timer function: 1 minute - 48 hour (1 minute unit)
• Power supply: 100VAC 50/60Hz
• Maximum operation current: 14A
• Weight: 29kg
• Accessories: External circulation nozzle x 2 pieces, outlet adapter x 1 piece, insulation hose (inner diameter f8mm x 1m) x 2 pieces
• *Frozen machine doesn't work at a liquid temperature of 40? or higher.
• *Please avoid continuous operation at high temperature range (80? near).
• *Circulation pump performance is the value when using pump single.
• Provides improved cooling capability due to adoption of high performance refrigerator.
• Supports pure water*#?1#* because SUS304 square coil is used for circulation water cooler.
• Adopts R-404 refrigerant with zero ozonosphere disruption potential for environment protection.
• External circulation nozzle is located on the front of controller, which can be rotated to any direction within range of 180?.
• Adopts PV?SV dual display system for temperature setting display which allows user to confirm measured value and set value at a glance.
• SB(support rod?bracket set) can be used to clamp flask or external sensor inside water bath.?1 When using pure water, make sure that electric conductivity is 10*u*S/*cm*(proximate purity).
$0
Constant-Low-Temperature Water Circulator -30 to 80? 340W

Constant-Low-Temperature Water Circulator -30 to 80? 340W

AS ONE Corporation

• Model number: LTB - 250a
• Type: -30 to +80
• Size (mm): 340
• Temperature settings, display system: Key input system (0.1?), PV, SV digital 2 stage rack display
• Temperature control system: Microcomputer type PID control
• Temperature sensor: Resistance thermometer (Pt100O)
• Temperature accuracy: ?1.0? (conditions may vary)
• Heater: 1kW
• External dimensions: 305 x 490 x 700mm
• Chamber dimensions: 239 x 299 x 200mm
• Effective opening dimensions: 235 x 162 x 200mm
• Tank capacity: Approximately 12L
• Material: Water tank, cooling coil/stainless steel (SUS304)
• Type of liquid used: Pure water, freshwater, ethylene glycol, ethyl alcohol
• Refrigerant: R-404A
• Circulation pump: Maximum flow 7.5L/min, maximum head 5m
• Circulating nozzle outer diameter: f11mm (adaptive tube inner diameter f9mm)
• Safety device: Self-diagnosis function (upper or lower limit temperature abnormality detection, float type no-water burning prevention, sensor abnormal, heater disconnection, electrical leakage/overcurrent breaker, frozen machine overload relay)
• External input, external output: External temperature sensor input terminal (for Pt100), Analog output meter for thermometer (1?5V), Alarm output terminal (DC12 - 17V, 20mA)
• Timer function: 1 minute - 48 hour (1 minute unit)
• Power supply: 100VAC 50/60Hz
• Maximum operation current: 15A
• Weight: 39kg
• Accessories: External circulation nozzle x 2 pieces, outlet adapter x 1 piece, insulation hose (inner diameter f8mm x 1m) x 2 pieces
• *Frozen machine doesn't work at a liquid temperature of 40? or higher.
• *Please avoid continuous operation at high temperature range (80? near).
• *Circulation pump performance is the value when using pump single.
• Provides improved cooling capability due to adoption of high performance refrigerator.
• Supports pure water*#?1#* because SUS304 square coil is used for circulation water cooler.
• Adopts R-404 refrigerant with zero ozonosphere disruption potential for environment protection.
• External circulation nozzle is located on the front of controller, which can be rotated to any direction within range of 180?.
• Adopts PV?SV dual display system for temperature setting display which allows user to confirm measured value and set value at a glance.
• SB(support rod?bracket set) can be used to clamp flask or external sensor inside water bath.?1 When using pure water, make sure that electric conductivity is 10*u*S/*cm*(proximate purity).
$0
Constant-Low-Temperature Water Circulator -30 to 80? 440W

Constant-Low-Temperature Water Circulator -30 to 80? 440W

AS ONE Corporation

• Model number: LTB - 400a
• Type: -30 to +80
• Size (mm): 440
• Temperature settings, display system: Key input system (0.1?), PV, SV digital 2 stage rack display
• Temperature control system: Microcomputer type PID control
• Temperature sensor: Resistance thermometer (Pt100O)
• Temperature accuracy: ?1.0? (conditions may vary)
• Heater: 1kW
• External dimensions: 350 x 585 x 965mm
• Chamber dimensions: 296 x 501 x 200mm
• Effective opening dimensions: 293 x 227 x 200mm
• Tank capacity: Approximately 24L
• Material: Water tank, cooling coil/stainless steel (SUS304)
• Type of liquid used: Pure water, freshwater, ethylene glycol, ethyl alcohol
• Refrigerant: R-404A
• Circulation pump: Maximum flow 13L/min, maximum head 8.5m
• Circulating nozzle outer diameter: f11mm (adaptive tube inner diameter f9mm)
• Safety device: Self-diagnosis function (upper or lower limit temperature abnormality detection, float type no-water burning prevention, sensor abnormal, heater disconnection, electrical leakage/overcurrent breaker, frozen machine overload relay)
• External input, external output: External temperature sensor input terminal (for Pt100), Analog output meter for thermometer (1?5V), Alarm output terminal (DC12 - 17V, 20mA)
• Timer function: 1 minute - 48 hour (1 minute unit)
• Power supply: 100VAC 50/60Hz
• Maximum operation current: 18A
• Weight: 50kg
• Accessories: External circulation nozzle x 2 pieces, insulation hose (inner diameter f8mm x 1 m) x 2 pieces
• *Frozen machine doesn't work at a liquid temperature of 40? or higher.
• *Please avoid continuous operation at high temperature range (80? near).
• *Circulation pump performance is the value when using pump single.
• Provides improved cooling capability due to adoption of high performance refrigerator.
• Supports pure water*#?1#* because SUS304 square coil is used for circulation water cooler.
• Adopts R-404 refrigerant with zero ozonosphere disruption potential for environment protection.
• External circulation nozzle is located on the front of controller, which can be rotated to any direction within range of 180?.
• Adopts PV?SV dual display system for temperature setting display which allows user to confirm measured value and set value at a glance.
• SB(support rod?bracket set) can be used to clamp flask or external sensor inside water bath.?1 When using pure water, make sure that electric conductivity is 10*u*S/*cm*(proximate purity).
$0
Cooling Water Circulator 4.5L

Cooling Water Circulator 4.5L

AS ONE Corporation

• Model number: LTC - 450a
• Temperature range (?): -20 to +20
• Temperature control accuracy: ?2.0? *1
• Circulation method: Sealed system circulation
• Temperature control accuracy: ?2.0? *1
• Type of liquid used: City water, pure water, ethylene glycol, etc
• Circulation pump (50/60Hz): Maximum flow 12/12L/min, maximum head 4.5/5.7m (circulation pump performance is when using pump single)
• Circulating nozzle outer diameter: f11mm (adaptive tube inner diameter f9mm)
• Refrigerating machine: 450W
• Liquid bath: f180 x H180mm approximately 4.5L
• Refrigerant: R404A
• Power supply: 100VAC 50/60Hz
• Timer function: 1 minute - 99 hour (1 minute unit)
• Self-diagnosis function: Upper/lower limit temperature abnormality detection, sensor abnormality, frozen machine overload relay, frozen machine protection timer, power failure detection, control temperature abnormality, memory error
• External input, external output: External temperature sensor input terminal, analog output terminal for thermometer (DC1 - 5V) alarm output terminal (DC12V - 17V)
• Size: 218 x 430 x 563mm
• Weight: Approx 32kg
• *You can use pure water whose conductivity meter is 10?S/cm or more (low purity).
• *1: Room temperature 20?/maximum circulation amount/power AC100V 50/60Hz/settings 5 - 20?/no load
• Adopts new HFC refrigerant with zero ozonosphere disruption potential.
• Possible to circulate pure water because all wet surfaces are made of stainless steel with superior durability.
• Provides strong cooling capability, covering wide range of applications.
• User can measure temperature of object directly by using external temperature sensor.
• Integrates overload protection device, high pressure switch, safety breaker, and self diagnosis function.
$0
Cooling Water Circulator 16L

Cooling Water Circulator 16L

AS ONE Corporation

• Model number: LTC - 1200a
• Temperature range (?): -20 to +30
• Temperature control accuracy: ?2.0? *1
• Circulation method: Sealed system circulation
• Temperature control accuracy: ?2.0? *1
• Type of liquid used: City water, pure water, ethylene glycol, etc
• Circulation pump (50/60Hz): Maximum flow 20/20L/min, maximum head 9.5/12.9m (circulation pump performance is when using pump single)
• Circulating nozzle outer diameter: f11mm (adaptive tube inner diameter f9mm)
• Refrigerating machine: 675W
• Liquid bath: f280 x H280mm approximately 16L
• Refrigerant: R407C
• Power supply: 100VAC 50/60Hz
• Timer function: 1 minute - 99 hour (1 minute unit)
• Self-diagnosis function: Upper/lower limit temperature abnormality detection, sensor abnormality, frozen machine overload relay, frozen machine protection timer, power failure detection, control temperature abnormality, memory error
• External input, external output: External temperature sensor input terminal, analog output terminal for thermometer (DC1 - 5V) alarm output terminal (DC12V - 17V)
• Size: 357 x 407 x 800mm
• Weight: Approx 45kg
• *You can use pure water whose conductivity meter is 10?S/cm or more (low purity).
• *1: Room temperature 20?/maximum circulation amount/power AC100V 50/60Hz/settings 5 - 20?/no load
• Adopts new HFC refrigerant with zero ozonosphere disruption potential.
• Possible to circulate pure water because all wet surfaces are made of stainless steel with superior durability.
• Provides strong cooling capability, covering wide range of applications.
• User can measure temperature of object directly by using external temperature sensor.
• Integrates overload protection device, high pressure switch, safety breaker, and self diagnosis function.
$0
Digital Hot Stirrer

Digital Hot Stirrer

AS ONE Corporation

• Size: 230 x 295 x 130mm
• Rotation speed setting range: 100 - 1500rpm (setting resolution: 10rpm)
• Number of stirring: 4
• Temperature settings range: 0 - 350? (setting resolution: 1?)
• Temperature control system: Microcomputer type PID control
• Internal sensor: K class thermocouple
• Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit)
• Plate size: 210 x 210mm
• Plate material: Aluminum die cast (ceramic coating finish)
• Heater capacity: 1100W
• Power supply: 100VAC 50/60Hz
• Weight: 8.1kg
• Model number: DP-1M
• *Stirrer bar is not included in the package.
$0