AS ONE Corporation
Both Side Opening Clamp Stainless Steel Pipe
AS ONE Corporation
• Material: Body / zinc alloy die casting (hard chrome plating), special heat-resistant vinyl wrap, pattern parts / stainless steel (SUS304)
• Mountable rod diameter: f8 to 18 mm
• Pipe size: approx. 12.7 x 183 mm
• Model number: C-100
• Tightening range (mm): 10 to 100
• Since pinching part is double-opening type and 3-claws, it can be securely fixed.
$0
Both Side Opening Clamp Stainless Steel Pipe
AS ONE Corporation
• Material: Body / zinc alloy die casting (hard chrome plating), special heat-resistant vinyl wrap, pattern parts / stainless steel (SUS304)
• Mountable rod diameter: f8 to 18 mm
• Pipe size: approx. 12.7 x 183 mm
• Model number: C-80
• Tightening range (mm): 5 to 80
• Since pinching part is double-opening type and 3-claws, it can be securely fixed.
$0
Both Side Opening Clamp Stainless Steel Pipe
AS ONE Corporation
• Material: Body / zinc alloy die casting (hard chrome plating), special heat-resistant vinyl wrap, pattern parts / stainless steel (SUS304)
• Mountable rod diameter: f8 to 18 mm
• Pipe size: approx. 9.5 x 145 mm
• Model number: C-50
• Tightening range (mm): 3 to 50
• Since pinching part is double-opening type and 3-claws, it can be securely fixed.
$0
Both Side Opening Clamp with Adjustable Holder 10 - 100mm
AS ONE Corporation
• Model number: CMF-100T
• Tightening range (mm): 10 - 100
• Material: Zinc alloy die casting (hard chromium plating), special heat resistance vinyl roll
• Attachable rod diameter: f8 - 18mm
• T-shaped fixing screw of clamp holder facilitates tightening.
• Since pinching part is double-open type and 3-claws, possible to securely fixed.
• Model with flexible clamp holder can be adjusted up to 360?.
$0
Both Side Opening Clamp with Adjustable Holder 5 - 80mm
AS ONE Corporation
• Model number: CMF-80T
• Tightening range (mm): 5 - 80
• Material: Zinc alloy die casting (hard chromium plating), special heat resistance vinyl roll
• Attachable rod diameter: f8 - 18mm
• T-shaped fixing screw of clamp holder facilitates tightening.
• Since pinching part is double-open type and 3-claws, possible to securely fixed.
• Model with flexible clamp holder can be adjusted up to 360?.
$0
Both Side Opening Clamp with Adjustable Holder 3 - 50mm
AS ONE Corporation
• Model number: CMF-50T
• Tightening range (mm): 3 - 50
• Material: Zinc alloy die casting (hard chromium plating), special heat resistance vinyl roll
• Attachable rod diameter: f8 - 18mm
• T-shaped fixing screw of clamp holder facilitates tightening.
• Since pinching part is double-open type and 3-claws, possible to securely fixed.
• Model with flexible clamp holder can be adjusted up to 360?.
$0
Both Side Opening Clamp with Fixed Holder 10 - 100mm
AS ONE Corporation
• Model number: CML-100T
• Tightening range (mm): 10 - 100
• Material: Zinc alloy die casting (hard chromium plating), special heat resistance vinyl roll
• Attachable rod diameter: f8 - 18mm
• T-shaped fixing screw of clamp holder facilitates tightening.
• Since pinching part is double-open type and 3-claws, possible to securely fixed.
• Model with flexible clamp holder can be adjusted up to 360?.
$0
Both Side Opening Clamp with Fixed Holder 5 - 80mm
AS ONE Corporation
• Model number: CML-80T
• Tightening range (mm): 5 - 80
• Material: Zinc alloy die casting (hard chromium plating), special heat resistance vinyl roll
• Attachable rod diameter: f8 - 18mm
• T-shaped fixing screw of clamp holder facilitates tightening.
• Since pinching part is double-open type and 3-claws, possible to securely fixed.
• Model with flexible clamp holder can be adjusted up to 360?.
$0
Both Side Opening Clamp with Fixed Holder 3 - 50mm
AS ONE Corporation
• Model number: CML-50T
• Tightening range (mm): 3 - 50
• Material: Zinc alloy die casting (hard chromium plating), special heat resistance vinyl roll
• Attachable rod diameter: f8 - 18mm
• T-shaped fixing screw of clamp holder facilitates tightening.
• Since pinching part is double-open type and 3-claws, possible to securely fixed.
• Model with flexible clamp holder can be adjusted up to 360?.
$0
Sealed Bottle Cap
AS ONE Corporation
• Model number: WRA-01
• Body:
• Material: Cover/Silicone rubber, Hole cap/PP (polypropylene), Septum/Silicone rubber
• Size: f40 x 56mm
• Quantity: 1 piece
• Accessories: Septum x 3, Hole cap x 2
• *It is suitable for commercially available reagent bottle such as dehydrated solvent of 100 - 500mL (it may not be used due to cap shape).
• Sealing bottle cap for dehydration solvents, born from researcher's needs. Ideal for reagent that amount of moisture of ppm unit might be critical date.
• Long-term use of reagent is expected by covering it on bottle cap with septum.
•
• Dedicated bottle for sealing bottle cap(WRA-01).
• When placed with silikagel etc in desiccant bottle, dry maintenance between septums and high preservation are expected.
•
• Sealing bottle cap which is co-developed with RIKEN.
• Long-term use of reagent is expected by covering it on bottle.
$0
Sealed Bottle Cap Septum Cap for Replacement
AS ONE Corporation
• Model number: WRA-11
• Septum cap for replacement
• Material: Silicone rubber
• Size: f24.3 x 5mm
• Quantity: 10 pieces
• Sealing bottle cap for dehydration solvents, born from researcher's needs. Ideal for reagent that amount of moisture of ppm unit might be critical date.
• Long-term use of reagent is expected by covering it on bottle cap with septum.
•
• Dedicated bottle for sealing bottle cap(WRA-01).
• When placed with silikagel etc in desiccant bottle, dry maintenance between septums and high preservation are expected.
•
• Sealing bottle cap which is co-developed with RIKEN.
• Long-term use of reagent is expected by covering it on bottle.
$0
Sealed Bottle Cap Drying Agent Bottle 5mL
AS ONE Corporation
• Model number: Drying agent bottle S
• 5mL
• Material: Bottle for drying agent/PS (polystyrene), Cap/PP (Polypropylene)
• Size: f21 x 54.8mm
• Quantity: 1 piece
• Sealing bottle cap for dehydration solvents, born from researcher's needs. Ideal for reagent that amount of moisture of ppm unit might be critical date.
• Long-term use of reagent is expected by covering it on bottle cap with septum.
•
• Dedicated bottle for sealing bottle cap(WRA-01).
• When placed with silikagel etc in desiccant bottle, dry maintenance between septums and high preservation are expected.
•
• Sealing bottle cap which is co-developed with RIKEN.
• Long-term use of reagent is expected by covering it on bottle.
$0
Sealed Bottle Cap Over Cap Type
AS ONE Corporation
• Model number: WRA-02
• Over cap type
• Material: Silicone rubber
• Size: f40 x 32.2mm
• Quantity: 1 piece
• Sealing bottle cap for dehydration solvents, born from researcher's needs. Ideal for reagent that amount of moisture of ppm unit might be critical date.
• Long-term use of reagent is expected by covering it on bottle cap with septum.
•
• Dedicated bottle for sealing bottle cap(WRA-01).
• When placed with silikagel etc in desiccant bottle, dry maintenance between septums and high preservation are expected.
•
• Sealing bottle cap which is co-developed with RIKEN.
• Long-term use of reagent is expected by covering it on bottle.
$0
Sealed Bottle Cap Drying Agent Bottle 15mL
AS ONE Corporation
• Model number: Drying agent bottle M
• 15mL
• Material: Bottle for drying agent/PS (polystyrene), Cap/PP (Polypropylene)
• Size: f28 x 63.3mm
• Quantity: 1 piece
• Sealing bottle cap for dehydration solvents, born from researcher's needs. Ideal for reagent that amount of moisture of ppm unit might be critical date.
• Long-term use of reagent is expected by covering it on bottle cap with septum.
•
• Dedicated bottle for sealing bottle cap(WRA-01).
• When placed with silikagel etc in desiccant bottle, dry maintenance between septums and high preservation are expected.
•
• Sealing bottle cap which is co-developed with RIKEN.
• Long-term use of reagent is expected by covering it on bottle.
$0
Built-In Pump Vacuum Desiccator 300 x 222 x 570mm
AS ONE Corporation
• Material: Desiccator/transparent toughened PMMA (acrylic), plate thickness of 20mm, Lower pump room/steel baking coating
• Connection port for gas replacement: f6mm Nylon fitting
• Vacuum gauge equipment
• Weight: 21kg
• With PMMA (acrylic) shelf board x 2
• Vacuum ultimate pressure: 5.3kPa (40Torr)
• Exhaust speed (50/60Hz): 20/24L/min
• Power supply: AC100V 50/60Hz
• Power cord length: 3m (3P plug)
• Model number: VL-ALN
• Outer dimension (mm): 300 x 222 x 570
• Inner dimension (mm): 260 x 180 x 260
• Diaphragm type of dry vacuum pump and gas valve for replacement are built-in, and piping work is not required.
$0
Built-In Pump Vacuum Desiccator 300 x 322 x 570mm
AS ONE Corporation
• Material: Desiccator/transparent toughened PMMA (acrylic), plate thickness of 20mm, Lower pump room/steel baking coating
• Connection port for gas replacement: f6mm Nylon fitting
• Vacuum gauge equipment
• Weight: 23kg
• With PMMA (acrylic) shelf board x 2
• Vacuum ultimate pressure: 5.3kPa (40Torr)
• Exhaust speed (50/60Hz): 20/24L/min
• Power supply: AC100V 50/60Hz
• Power cord length: 3m (3P plug)
• Model number: VK-ALN
• Outer dimension (mm): 300 x 322 x 570
• Inner dimension (mm): 260 x 280 x 260
• Diaphragm type of dry vacuum pump and gas valve for replacement are built-in, and piping work is not required.
$0
Vacuum Dryer (SB Series)
AS ONE Corporation
• Inner capacity (L): 8
• Additional function: Timer function/Program function/Timer for specifying day and time
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• Communication function: standards : Bluetooth Smart (Bluetooth 4.2)/Distance: Class2 (Approximately 10 m)
• Logger function: Recording period: 2 seconds/10 seconds/30 seconds/1 minute/10 minutes/60 minutes
• Display period: 2 sec/10 sec/30 sec/sec/60 sec/300 sec
• Recording method: full stop (Stop recording in full memory)
• recording format: CSV format
• *Compatible OS: iOS 11.4 and later
• *compatible models: iPhone 5s, 5c, 6, 6 Plus, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X
• Additional function: timer (ON/OFF timer, SV start/ON/OFF timer)/temperature gradient program of up to 16 steps x 8 patterns/day/time specification timer
• Error output: AC100V 1A output (M4 terminal block)
• material
• *Exterior: Steel baked paint
• *Interior: SUS304
• *shelf board: Aluminium
• *Valves, Piping, Fittings: brass (C -3771, C -3604)
• *Vacuum gauge: brass (C 2680 TW, C 3604 BD)
• *Door packing: silicone rubber
• *Observation window: tempered glass (Thickness 12mm), protective plate made of polycarbonate
• Outer dimensions (mm): 343 x 376 x 509
• Inner dimensions (mm): 200 x 200 x 200
• Heater capacity: 800W
• Power supply: AC100V 50/60Hz 8A
• Power cord length: 2.5 m
• Weight: about 25kg
• Accessories: shelf board x 2 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
$0
Vacuum Dryer (SB Series)
AS ONE Corporation
• Inner capacity (L): 15
• Additional function: Timer function/Program function/Timer for specifying day and time
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• Communication function: standards : Bluetooth Smart (Bluetooth 4.2)/Distance: Class2 (Approximately 10 m)
• Logger function: Recording period: 2 seconds/10 seconds/30 seconds/1 minute/10 minutes/60 minutes
• Display period: 2 sec/10 sec/30 sec/sec/60 sec/300 sec
• Recording method: full stop (Stop recording in full memory)
• recording format: CSV format
• *Compatible OS: iOS 11.4 and later
• *compatible models: iPhone 5s, 5c, 6, 6 Plus, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X
• Additional function: timer (ON/OFF timer, SV start/ON/OFF timer)/temperature gradient program of up to 16 steps x 8 patterns/day/time specification timer
• Error output: AC100V 1A output (M4 terminal block)
• material
• *Exterior: Steel baked paint
• *Interior: SUS304
• *shelf board: Aluminium
• *Valves, Piping, Fittings: brass (C -3771, C -3604)
• *Vacuum gauge: brass (C 2680 TW, C 3604 BD)
• *Door packing: silicone rubber
• *Observation window: tempered glass (Thickness 12mm), protective plate made of polycarbonate
• Outer dimensions (mm): 393 x 426 x 559
• Inner dimensions (mm): 250 x 250 x 250
• Heater capacity: 800W
• Power supply: AC100V 50/60Hz 8A
• Power cord length: 2.5 m
• Weight: about 33kg
• Accessories: shelf board x 2 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
$0
Vacuum Dryer (SB Series)
AS ONE Corporation
• Inner capacity (L): 30
• Additional function: Timer function/Program function/Timer for specifying day and time
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• Communication function: standards : Bluetooth Smart (Bluetooth 4.2)/Distance: Class2 (Approximately 10 m)
• Logger function: Recording period: 2 seconds/10 seconds/30 seconds/1 minute/10 minutes/60 minutes
• Display period: 2 sec/10 sec/30 sec/sec/60 sec/300 sec
• Recording method: full stop (Stop recording in full memory)
• recording format: CSV format
• *Compatible OS: iOS 11.4 and later
• *compatible models: iPhone 5s, 5c, 6, 6 Plus, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X
• Additional function: timer (ON/OFF timer, SV start/ON/OFF timer)/temperature gradient program of up to 16 steps x 8 patterns/day/time specification timer
• Error output: AC100V 1A output (M4 terminal block)
• material
• *Exterior: Steel baked paint
• *Interior: SUS304
• *shelf board: Aluminium
• *Valves, Piping, Fittings: brass (C -3771, C -3604)
• *Vacuum gauge: brass (C 2680 TW, C 3604 BD)
• *Door packing: silicone rubber
• *Observation window: tempered glass (Thickness 12mm), protective plate made of polycarbonate
• Outer dimensions (mm): 453 x 486 x 619
• Inner dimensions (mm): 310 x 310 x 310
• Heater capacity: 1360W
• Power supply: AC100V 50/60Hz 14 A
• Power cord length: 2.5 m
• Weight: about 45kg
• Accessories: shelf board x 2 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
$0
Vacuum Dryer (SB Series)
AS ONE Corporation
• Inner capacity (L): 91
• Additional function: Timer function/Program function/Timer for specifying day and time
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• Communication function: standards : Bluetooth Smart (Bluetooth 4.2)/Distance: Class2 (Approximately 10 m)
• Logger function: Recording period: 2 seconds/10 seconds/30 seconds/1 minute/10 minutes/60 minutes
• Display period: 2 sec/10 sec/30 sec/sec/60 sec/300 sec
• Recording method: full stop (Stop recording in full memory)
• recording format: CSV format
• *Compatible OS: iOS 11.4 and later
• *compatible models: iPhone 5s, 5c, 6, 6 Plus, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X
• Additional function: timer (ON/OFF timer, SV start/ON/OFF timer)/temperature gradient program of up to 16 steps x 8 patterns/day/time specification timer
• Error output: AC100V 1A output (M4 terminal block)
• material
• *Exterior: Steel baked paint
• *Interior: SUS304
• *shelf board: Aluminium
• *Valves, Piping, Fittings: brass (C -3771, C -3604)
• *Vacuum gauge: brass (C 2680 TW, C 3604 BD)
• *Door packing: silicone rubber
• *Observation window: tempered glass (Thickness 15mm), protective plate made of polycarbonate
• Outer dimensions (mm): 594 x 630 x 770
• Inner dimensions (mm): 450 x 450 x 450
• Heater capacity: 1680W
• Power supply: Single-phase AC 200V 50/60Hz 8.4 A
• Power cord length: 4.0 m
• Weight: about 105kg
• Accessories: shelf board x 3 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
$0