AS ONE Corporation

• Capacity (mL): 400
• Inner diameter (fmm) (top/bottom): 88/82
• Cover outer diameter x body bottom diameter x total height (mm): f99.2 x f85 x 95.6
• Quantity: 1 case (100 pieces)
• Material: Body, cover/PP (polypropylene), Inner Lid / LDPE (low density polyethylene)
• It excels in sealing nature and chemical resistance.

• Model number: V-100
• Capacity: 100mL
• Upper diameter x lower diameter x height (mm): f60 x f44 x 74
• 1 scale (mL): 10
• Quantity: 1 piece
• Vacuum type
• Material: PP (polypropylene, translucence)
• Bottom is flat because of vacuum molding.

• Model number: V-150
• Capacity: 150mL
• Upper diameter x lower diameter x height (mm): f65 x f49 x 77
• 1 scale (mL): 10
• Quantity: 1 piece
• Vacuum type
• Material: PP (polypropylene, translucence)
• Bottom is flat because of vacuum molding.

• Model number: V-200
• Capacity: 200mL
• Upper diameter x lower diameter x height (mm): f83 x f58 x 85
• 1 scale (mL): 20
• Quantity: 1 piece
• Vacuum type
• Material: PP (polypropylene, translucence)
• Bottom is flat because of vacuum molding.

• Model number: V-300
• Capacity: 300mL
• Upper diameter x lower diameter x height (mm): f91 x f67 x 96
• 1 scale (mL): 25
• Quantity: 1 piece
• Vacuum type
• Material: PP (polypropylene, translucence)
• Bottom is flat because of vacuum molding.

• Model number: V-500
• Capacity: 500mL
• Upper diameter x lower diameter x height (mm): f103 x f78 x 119
• 1 scale (mL): 50
• Quantity: 1 piece
• Vacuum type
• Material: PP (polypropylene, translucence)
• Bottom is flat because of vacuum molding.

• Model number: V-1000
• Capacity: 1L
• Upper diameter x lower diameter x height (mm): f124 x f99 x 141
• 1 scale (mL): 100
• Quantity: 1 piece
• Vacuum type
• Material: PP (polypropylene, translucence)
• Bottom is flat because of vacuum molding.

• Model number: V-2000
• Capacity: 2L
• Upper diameter x lower diameter x height (mm): f158 x f125 x 180
• 1 scale (mL): 100
• Quantity: 1 piece
• Vacuum type
• Material: PP (polypropylene, translucence)
• Bottom is flat because of vacuum molding.

• Model number: V-100C
• Capacity: 100mL
• Upper diameter x lower diameter x height (mm): f60 x f44 x 74
• 1 scale (mL): 10
• Quantity: 1 case (1000 pieces)
• Vacuum type
• Material: PP (polypropylene, translucence)
• Bottom is flat because of vacuum molding.

• Model number: V-150C
• Capacity: 150mL
• Upper diameter x lower diameter x height (mm): f65 x f49 x 77
• 1 scale (mL): 10
• Quantity: 1 case (1000 pieces)
• Vacuum type
• Material: PP (polypropylene, translucence)
• Bottom is flat because of vacuum molding.

• Model number: V-200C
• Capacity: 200mL
• Upper diameter x lower diameter x height (mm): f83 x f58 x 85
• 1 scale (mL): 20
• Quantity: 1 case (1000 pieces)
• Vacuum type
• Material: PP (polypropylene, translucence)
• Bottom is flat because of vacuum molding.

• Material: Strut, base/Stainless Steel (SUS304), Holder/zinc alloy die casting (hard chromium plating)
• Base dimensions: 50 x 300 x 30mm
• Model number: A set
• Set content: Base x 2 pieces, Holder clamp x 20 pieces, Strut: 1200mm/4 pieces, 855mm/4 pieces, 600mm/4 pieces, 300mm/2 pieces (f13mm)
• It is stainless steel stand for experiment, and excellent in intensity and corrosion reistance.
• According to contents of research/experiment, it can assemble freely and connect.

• Material: Strut, base/Stainless Steel (SUS304), Holder/zinc alloy die casting (hard chromium plating)
• Base dimensions: 50 x 300 x 30mm
• Model number: B set
• Set content: Base x 2 pieces, Strut: 855mm/4 pieces, 600mm/4 pieces, 300mm/2 pieces (f13mm) , Holder clamp x 14 pieces
• It is stainless steel stand for experiment, and excellent in intensity and corrosion reistance.
• According to contents of research/experiment, it can assemble freely and connect.

• Tip hole diameter: f5 - 6.5mm
• Material: Natural rubber
• Color: Black
• Capacity: 50mL
• This latex filler is integrally molded and ball valve is put into 3 places.
• Pipette operation(suction and dropping of solution) of acid, harmful dangerous liquid, etc. can be performed quickly and correctly.

• Tip hole diameter: f5 - 6.5mm
• Material: Natural rubber
• Color: Brick color
• Capacity: 50mL
• This latex filler is integrally molded and ball valve is put into 3 places.
• Pipette operation(suction and dropping of solution) of acid, harmful dangerous liquid, etc. can be performed quickly and correctly.

• Model number: TPH-01H
• Standard substitute edge (stainless steel (SUS304)))
• Size: 13.5 x 70mm
• Blade thickness: 1.0mm
• *For TPH-01.
• It is grinder using embrittlement nature of plastic by freeze.
• Frozen cup grinds together with liquid nitrogen.
• Bio-sample, plastic, and piece of wood can be ground, and possible to made fine powder.
• Since it grinds in the state of freeze with liquid nitrogen, prevention from degradation(oxidization) of pulverization thing and pulverization capacity increase can be planned.
• It is positive double cold-packed structure(with lid and safety switch).

• Model number: TPH-01K
• Extremely hard substitute edge (Stainless steel (SUS301))
• Size: 13.5 x 70mm
• Blade thickness: 1.0mm
• *For TPH-01.
• It is grinder using embrittlement nature of plastic by freeze.
• Frozen cup grinds together with liquid nitrogen.
• Bio-sample, plastic, and piece of wood can be ground, and possible to made fine powder.
• Since it grinds in the state of freeze with liquid nitrogen, prevention from degradation(oxidization) of pulverization thing and pulverization capacity increase can be planned.
• It is positive double cold-packed structure(with lid and safety switch).

• Model number: TPH-01C
• Cup with urethane
• Material: Cup/stainless steel (SUS304), Base/urethane
• Size: Cup/f75 x 50mm, Base/115 x 115 x 45mm
• Capacity: About 100mL
• *For TPH-01.
• It is grinder using embrittlement nature of plastic by freeze.
• Frozen cup grinds together with liquid nitrogen.
• Bio-sample, plastic, and piece of wood can be ground, and possible to made fine powder.
• Since it grinds in the state of freeze with liquid nitrogen, prevention from degradation(oxidization) of pulverization thing and pulverization capacity increase can be planned.
• It is positive double cold-packed structure(with lid and safety switch).

• Size (mm): 194 x 214 x 305
• Weight (kg): about 8.5
• Rotation speed: 15000rpm
• Motor: 140W
• Power supply: AC100V 50/60Hz (3P plug)
• Cup capacity: about 100mL
• processing power: 5 to: 10 g/dose
• Liquid nitrogen consumption: 50mL/dose
• Rotation direction: clock direction when viewed from above
• Frozen cup (SUS304): f75 x H 50mm (inner diameter), f85 x H 60mm (Rubber external dimension)
• Rotating blade Z type: 70 x 10mm
• Accessories
• *Standard replacement blade (TPH-01H) x 1 piece
• *Cup (TPH-01C) x 1 piece
• *Replacement carbon brush (2 pieces) x 1 piece
• *brush
• *single-end wrench x2

• Model number: SKH-01
• Applicable sieve: f200 x 45mm (5 stages of sieve)
• System: Turning movement (turning diameter f30mm)
• Turning rotation speed: 20 - 200rpm
• Power supply: 100VAC 50/60Hz
• Weight: 17.2kg
• Size: 380 x 375 x 469mm
• *Sieve is not included in the package.
• 5-tiers can be stacked, and possible to equip with sieve, and improve efficiency by regulation of revolution speed.
• A turning radius is 30*mm* that is electromagnetism 10 times the amplitude than electromagnetism.