Elevating/Tilt Work Table With Adjuster

• Size (mm): 150 x 182 x 76
• Weight (kg): 1
• Ozone generation: 0.004 ppm or less (Distance 150 mm)
• Ion Balance (Distance 300 mm, Factory Default): ? 3 V or Less
• air volume : 1.4 to 3.5 m3/min
• Wind velocity: 1.5 to 2.9 m/sec (Straight Louver Distance 300 mm Center), 0.1 to 0.3 m/sec (Wide-angle Louver Distance 300 mm Center)
• Input power supply: DC24V (AC Adapter Included AC100 to 240 V Compatible)
• capacity: 12 VA
• Output Voltage: ? 7,500 V 0-P
• Accessories: AC adapter, wide-angle louver, lead wire for output signal (2 pieces Gumi)
• ?Static Elimination Time: 1.5 Seconds or Less (Distance 300 mm, Factory Default)
• ?environment used : Ambient Temperature : 0 to 40 ? C Ambient Humidity : 15 to 85 %RH (noncondensing)
• ?filters: prefilter class
• ?Output Signal: MOS FET Relay Non-Voltage Contact Output (NC Output) (OFF at high voltage error or fan error)
• ?Noise: 63 dB (A) (Distance 1m)
• ?material: Body/ABS Plastic, Discharge Needle/Tungsten, Stand/SECC, Louver/PC/ASA

• Frontage (mm): 900
• Depth (mm): 600
• Height (mm): 740
• Color: Green
• equal load (kg): 800
• Top board material: Steel
• Mass (kg): 31
• Assembly
• Adjuster screw Size: M16x2 0
• Adjuster adjustment range: 20mm
• Body: Steel
• Application: Various manufacturer, etc., factory work suitable.
• Country of origin: Japan
• Weight: 29.5kg
• Manufacturer's model number: GWS0960
• CODE No.: 301-1984

• Model number: TFV-01
• Size: 125 x 36 x 78mm
• Weight: Approximately 240g (including battery)
• Display range: Wind speed/0 - 10m/s (value), 0 - 5m/s (bar graph), Temperature/0 - 50?
• Resolution: Wind speed/0.01m/s, Temperature/0.1?
• Accuracy: Wind speed/+/- 10%rdg +/- 0.1m/s (10 - 40?), Temperature/+/- 1? (at time of factory shipment)
• Measuring method: Thermal type (thermistor)
• Function: Peak hold, calibration (0.5m/s 1 point correction), external sensor automatic switching
• Battery life: Approx 100 hours (using alkaline dry cell, at wind speed 1m/s)
• Power supply: AA dry battery x 4 pieces (included for testing) or AC adapter (optional)
• Possible to intuitively check wind velocity because bar graph expands and contracts in real time.
• Adjusts display with anemometer by calibration function.
• Possible to monitor wind speed of remote location with using external sensor(sold separately).

• Model number: Color sleeve for replacement (for f5mm shaft)
• Material: POM (polyacetal)
• Both hands to be free If you use the foot switch, continuous work is possible.
• Because It is combination of sleeve bearing, can be stirred to ensure load it takes.

• Model number: Color sleeve for replacement (for f6mm shaft)
• Material: POM (polyacetal)
• Both hands to be free If you use the foot switch, continuous work is possible.
• Because It is combination of sleeve bearing, can be stirred to ensure load it takes.