General-Purpose Hot Plate

• Model number: HP2020
• Highest temperature: 300 ?
• Plate size: 200 x 200mm
• Plate material: Aluminum
• Size: 202 x 202 x 64mm
• Heater capacity: 700W
• Temperature sensor: K class thermocouple
• Mounting screw hole: M4 tapping 4 points
• Power supply: 100VAC 50/60Hz
• *Please use it by connecting to temperature controller or Slidac (temperature controller P.360 1-7582-01, etc. Please be careful of power consumption. ). *Power cord is not included.
• These simple hot plates consist with heating plate, heater and thermocouple temperature sensor.

• Specifications: Without measurement hole
• Drain water: Natural evaporation method
• Temperature settings range : 3 - 45 deg C
• Convection system : Natural convection system (5 sides cooling and heating)
• Cooling heater: Peltier Element
• Setting temperature: 1 deg C unit
• Temperature distribution accuracy: +/- 0.5 deg C (at 37 deg C)
• Temperature control accuracy: +/- 0.5 deg C
• Material : Frame/Steel painted finish , Interior/Aluminium , Door surface/ABS Plastic
• Power supply: AC100 to 240 V 50/60 Hz
• Power cord length : 2 meters (2P plug)
• Safety devices: overcurrent protection fuses
• Capacity: 28L
• Outer dimensions : 413 x 420 x 485mm
• Innder dimensions: 219 x 329 x 369mm
• Weight: 13.5 kg
• Accessories: Shelf board x 2 pieces
• Power consumption: 75W
• Country of origin: JAPAN
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Reached vacuum: 58.6 kPa
• Seal system: Lower heating
• Seal ability: 0.4 mm or less / 2 pieces
• power supply: AC100V 50 / 60Hz 1050 (560) W
• * In parentheses, 5 mm width seal heating
• Nagatoshi power cord: 3 m (2P Type)
• Weight: 12 kg
• Model number: V 301
• Seal size (Width ? Long mm): 10 (5) x 300
• main unit size (mm): 400 x 420 x 228

• Reached vacuum: 58.6 kPa
• Seal system: Heating upper and lower
• Seal ability: 0.5 mm or less / 2 pieces
• power supply: AC100V 50 / 60Hz 1050 W
• Nagatoshi power cord: 3 m (2P Type)
• Weight: 12.7 kg
• Model number: V 301-10 W
• Seal size (Width ? Long mm): 10 x 300
• main unit size (mm): 400 x 420 x 228

• System: Vacuum drying by decompressed chamber direct heating
• Operating temp. range: 40~200?
• Operating pressure range: 101~0.1kPa (760~1 Torr)
• Temp. control accuracy: ?1.0?(at 200?) JTM K05
• Temp. fluctuation: 3.0?(at 200?) JIS C60068
• Max. temp. reaching time: Approx. 80 min.
• Internal dimentions(WxDxH): 450 x 450 x 450mm
• External dimentions(WxDxH): 670 x 669 x 1500mm
• Internal capacity: Approx. 91L
• No. of steps/pitch: 4 steps/105mm
• Shelf load capacity : Approx. 15 kg/pc
• Power supply: AC220V 50/60Hz single phase 11A (plug is not included)
• Weight: Approx. 210kg
• Accessories: Stainless shelf x 2, Manual