Hot Plate

• Model number: HHP-250D
• Highest temperature: 300 ?
• Plate size: 250 x 250mm
• Plate material: Aluminum
• Digital
• Temperature control system: PID control
• Temperature settings unit: -10?
• Heater capacity: 950W
• Material: Body/stainless steel (SUS304), steel (SPCC)
• Safety device: Over current fuse, internal temperature fuse, high temperature warning display function
• Power supply: 100VAC 50/60Hz
• Main unit size: 250 x 285 x 125mm
• Weight: 5kg
• Possible to accurate temperature control by PID control method.

• Model number: EC-1200N
• Highest temperature: 300 ?
• Plate size: 400 x 300mm
• Plate material: Aluminum
• Temperature control system: PID control with auto-tuning function
• Main unit size: 450 x 350 x 133mm
• Plate material: Aluminum
• Withstand load: Approximately 15kg (however, distributed load to 80% of plate area)
• Weight: Approx 11kg
• Power supply: 100VAC 50/60Hz, maximum 1kW
• Time allowed for continuous use: 48 hours (at the time of 250?)
• Power cord length: 2m (2P plug)
• It is uniformed temperature distribution with large area hot plate that is adopted a flat plate heater as heat source.
• Timer setting of 3patterns is possible.
• EC-1200NR:Separation type of heater, temperature controller, and excellent in durability.

• Model number: TH-900
• Highest temperature: 300 ?
• Plate size: 150 x 200mm (3 sides)
• Plate material: Aluminum (anodic oxide processing)
• Temperature distribution width: Within 5?
• Control system: PID control
• Main unit size: 530 x 270 x 137mm
• Weight: 11.5kg
• Withstand load: Approximately 3kg (1 plate)
• Heater capacity: 450W x 3
• Power supply: AC100V 50/60Hz15A
• Power cord length: 2.5m (3P, with ground pin)
• (3 tandem type)
• Possible for temperature control independently as 3 plates.

• Model number: HI-1000
• Highest temperature: 300 ?
• Plate size: 400 x 300mm
• Plate material: Aluminum
• Control system: PID control
• Temperature distribution width: Within 4?
• Main unit size: 450 x 350 x 135mm
• Heater capacity: 900W
• Power supply: 230V?5%
• Withstand load: Approx 10kg
• Weight: 8kg
• Country of origin: Japan
• Control Panel: English
• Plug: Type-I

• Highest temperature (?): 350
• Plate size (mm): 250 x 250
• Temperature settings range: Room temperature +10 - 350?
• Temperature settings: Digital input type
• Temperature distribution width: 4? (*temperature distribution width is indoor environment 25? (no wind, no load, using internal sensor), Reference value when setting to 200?. )
• Temperature control system: Microcomputer type PID control system, ON/OFF control system
• Temperature display system: LCD digital display (setting/measurement temperature simultaneous display, heater output bar graph display)
• Internal temperature sensor: K class thermocouple
• Safety device: Self-diagnosis function (Upper or lower limit temperature abnormality detection, heater abnormality detection, sensor abnormality detection), abnormal heating preventive device (thermostat), overcurrent fuse
• Heater capacity: 1000W
• Additional function: Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit), Program function: Number of steps/maximum 8 steps, repeat times/maximum 9999 times, Setting resolution/temperature 0.1?, time 1 minute, Communication function: PC output (RS232C/D-sub9pin 2m), External temperature sensor supported, Upper or lower limit temperature alarm, Alarm signal output, Settings value memory function, Key lock function, Auto-tuning function
• Plate material: Aluminum (ceramic coating)
• Size: 320 x 360 x 101mm
• Power supply: 220V?10%
• Power cord length: Approx 2m
• *Demonstration equipment 1-4601-31, 32, 41, 42 are available.
• Country of origin: Japan
• Control Panel : English
• Plug: Type F(https://en.wikipedia.org/wiki/Mains_electricity_by_country)