Magnetic Stirrer

• Digital type
• Size: 175 x 190 x 70mm
• Rotation speed control: Microcomputer method rotation speed feedback system
• Plate material: Stainless steel (SUS304)
• LED digital (SV/PV separated)
• Power supply: 100-240VAC 50/60Hz (including AC adapter, cord length approximately 2m)
• Weight: Approx 1kg
• Model number: HS-1DN
• Rotation speed (rpm): 100 - 1500
• Stirred capacity (mL): 50 - 3000 x 1
• *It is not suitable to use while heating liquid. *Stirrer bar is not included in the package.
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Plate material: Stainless steel (SUS304)
• Motor: DC brush motor
• Power supply: 100VAC 50/60Hz 1A
• Power cord length: 1.8m (3P type)
• Size: 470 x 330 x 57mm
• Weight: 5.2kg
• Accessories: Rotor (30mm) x 6 pcs
• Model number: HS-360
• Rotation speed (rpm): 100 - 1500
• Stirred capacity (mL): 50 - 2000 x 6
• The powerful rare earth magnet is used.
• Since all six pieces are independent rotations, a variety and a lot of churning can be performed simultaneously.
• The smooth rotation by electronic control does not have rotation unevenness by a constant voltage formula.

• Rotation speed (rpm): 100 to 1000
• Agitated capacity (mL): 3000
• top board Size : 165 x 150mm
• Plate material: Stainless steel SUS304
• Motor: DC brush motor
• Power supply: AC100V 50/60Hz
• Power cord length: 2.5 m (2P plug)
• Size: 165 x 153 x 43mm
• Weight: about 1kg
• Magnet strength: about 0.1 T
• Accessories: Teflon stirrer bar (30mm) x 1 piece

• Stirrer body (small)
• Stirred capacity: 10 - 1000mL
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Size: 70 x 70 x 29mm
• Used temperature: 0 - 60? (underwater)
• Structure: Silicone mold waterproof sealed structure
• Body material: PP (polypropylene) integral molding
• Cord: 1m x f2.5mm mini plug attached
• Model number: S-1
• Accessories: Joint bar x 1 piece
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers

• Stirrer body (large)
• Stirred capacity: 50 - 3000mL
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Size: 155 x 155 x 45mm
• Used temperature: 0 - 60? (underwater)
• Structure: Silicone mold waterproof sealed structure
• Body material: PP (polypropylene) integral molding
• Cord: 1m x f2.5mm mini plug attached
• Model number: B-1
• Accessories: Joint bar x 1 piece
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers