Vacuum Dryer (V Series)
• Inner capacity (L): 8
• Additional function: Timer function (ON/OFF/ON/OFF timer and SV start)
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• material
• *Exterior: Steel baked paint
• *Interior: SUS304
• *shelf board: Aluminium
• *Valves, Piping, Fittings: brass (C -3771, C -3604)
• *Vacuum gauge: brass (C 2680 TW, C 3604 BD)
• *Door packing: silicone rubber
• *Observation window: tempered glass (Thickness 12mm), protective plate made of polycarbonate
• Outer dimensions (mm): 343 x 376 x 509
• Inner dimensions (mm): 200 x 200 x 200
• Heater capacity: 800W
• Power supply: AC100V 50/60Hz 8A
• Power cord length: 2.5 m
• Weight: about 25kg
• Accessories: shelf board x 2 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
• Standard vacuum dryer model.
• To facilitate piping and operation, a vacuum pump connection valve and vacuum gauge are placed on the front operation panel.
• Double door of reinforced glass door and protective polycarbonate door is adopted.
• Uses heat-resistant packing for excellent durability and airtightness.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Standard model that can be set digitally for temperature control and over temperature rise prevention.
Description
• Inner capacity (L): 8
• Additional function: Timer function (ON/OFF/ON/OFF timer and SV start)
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• material
• *Exterior: Steel baked paint
• *Interior: SUS304
• *shelf board: Aluminium
• *Valves, Piping, Fittings: brass (C -3771, C -3604)
• *Vacuum gauge: brass (C 2680 TW, C 3604 BD)
• *Door packing: silicone rubber
• *Observation window: tempered glass (Thickness 12mm), protective plate made of polycarbonate
• Outer dimensions (mm): 343 x 376 x 509
• Inner dimensions (mm): 200 x 200 x 200
• Heater capacity: 800W
• Power supply: AC100V 50/60Hz 8A
• Power cord length: 2.5 m
• Weight: about 25kg
• Accessories: shelf board x 2 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
• Standard vacuum dryer model.
• To facilitate piping and operation, a vacuum pump connection valve and vacuum gauge are placed on the front operation panel.
• Double door of reinforced glass door and protective polycarbonate door is adopted.
• Uses heat-resistant packing for excellent durability and airtightness.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Standard model that can be set digitally for temperature control and over temperature rise prevention.
