AS ONE Corporation

• Specification: Main unit
• Rotation speed (rpm): 0 to 3000
• Rotation speed Unit : 100rpm
• Operation Toggle: Continuous or Touch Start
• Power supply: AC100-240V 50/60Hz
• Accessories: universal attachments

• Supply ability: 1 to 50 g/min ? In the case of flour
• Accuracy: Target Weight ?0.02% * In the case of flour
• Hopper capacity: about 500mL
• Power supply: AC100 to 240 V 50/60Hz
• Compatible electronic balance scale: Part No. 1 -6842 - 01 - 02
• Compatible communication cable: Part No. 1 -4244 -12
• *It is not possible to transfer non-flowing powder like potato starch.
• *The precision depends on the setting.
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Wavelength (nm): 470
• Light source: Blue LED light
• Maximum gel size: 100 x 150mm
• Power supply: AC100 to 240 V 50/60 Hz
• Size: 210 x 210 x 30mm
• Weight: 1.4 kg
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Model number: GHD-031
• Exhaust speed (L/min): 30/36 (50/60Hz)
• Achieving pressure (Pa): 0.67
• Power supply: 1f200-240V
• Inlet port size: KF-16
• Exhaust port diameter: G3/4
• Backflow prevention mechanism (air release mechanism released) installed
• Material: Aluminum, synthetic rubber, etc.
• Size: 120 x 288.5 x 163mm
• Weight: 9.3kg
• Country of origin: Japan

• Power supply: 1f220-240V
• Backflow prevention mechanism (air release mechanism released) installed
• Material: Aluminum, synthetic rubber, etc.
• Size: 413.5 x 150 x 234.5mm
• Weight: 22kg
• Exhaust speed (L/min): 100/120 (50/60Hz)
• Achieving pressure (Pa): Gas ballast closed/0.67, Gas ballast open/6.7
• Inlet/exhaust port diameter: KF-25/G-1
• Model number: GHD-100A
• Country of origin: Japan

• Model number: DOP-40D
• Exhaust speed (effective) (L/min): 40/44(50/60Hz)
• Achieving pressure: 1.2kPa
• Intake pipe and exhaust pipe diameter (OD) x (ID): 9 x 5mm
• Size: 160 x 270 x 179mm
• Weight: 7kg
• Power supply: 1f220V 50/60Hz
• Internal thermal protector
• Swing piston type
• *Power plug and power cord are not included.
• Country of origin: Japan

• Model number: DOP-80S
• Exhaust speed (effective) (L/min): 80/88(50/60Hz)
• Achieving pressure: 5.33kPa
• Intake pipe and exhaust pipe diameter (OD) x (ID): 9 x 5mm
• Size: 160 x 270 x 179mm
• Weight: 7kg
• Power supply: 1f220V 50/60Hz
• Internal thermal protector
• Swing piston type
• *Power plug and power cord are not included.
• Country of origin: Japan

• Model number: DOP-181SA
• Size: 172 x 266 x 235mm
• Weight: 12kg
• Power supply: 1f220V 50/60Hz
• Internal thermal protector
• Effective exhaust speed (50/60Hz) (L/min): 180/200
• Achieving pressure (kPa): 10
• Intake pipe and exhaust pipe diameter (OD) x (ID): RC3/8
• Swing piston type
• *DOP-181SA does not come with inlet and exhaust pipes.
• *Power plug and power cord are not included.
• Country of origin: Japan

• Model number: DTC-41
• Exhaust speed (effective) (L/min): 40/46(50/60Hz)
• Achieving pressure (kPa abs.): 1
• Power supply: 1f220V 50/60HZ
• Full load current: 2.2/2.3A(50/60Hz)
• Weight: 10.3kg
• Intake, exhaust port diameter: O.Df10 x I.Df6mm (G1/4)
• Operating surrounding atmosphere temperature: 0 - 40?
• Thermal protector: Internal
• Maximum dimensions: 155 x 336.5 x 217mm
• Corrosion resistance type
• Country of origin: Japan

• Model number: DTC-120
• Exhaust speed (effective) (L/min): 120/140(50/60Hz)
• Achieving pressure (kPa abs.): 1
• Power supply: 1f220-230V 50/60HZ
• Full load current: 5.1/6.0A(50/60Hz)
• Weight: 27.5kg
• Intake, exhaust port diameter: O.Df16 x I.Df10mm (G1/2)
• Operating surrounding atmosphere temperature: 0 - 40?
• Thermal protector: Internal
• Maximum dimensions: 203 x 411 x 300mm
• Corrosion resistance type
• Export Ristriction by METI (Ministry of Economy, Trade and Industry) of Japan
• Country of origin: Japan

• Model number: DTC-60
• Exhaust speed (effective) (L/min): 60/70(50/60Hz)
• Achieving pressure (kPa abs.): 1
• Power supply: 1f220V 50/60HZ
• Full load current: 3.8/3.9A(50/60Hz)
• Weight: 18.0kg
• Intake, exhaust port diameter: O.Df14 x I.Df9mm (G3/8)
• Operating surrounding atmosphere temperature: 0 - 40?
• Thermal protector: Internal
• Maximum dimensions: 158 x 340 x 242mm
• Corrosion resistance type
• Country of origin: Japan

• Model number: DTC-22
• Exhaust speed (effective) (L/min): 20/24(50/60Hz)
• Achieving pressure (kPa abs.): 1
• Power supply: 1f220V 50/60HZ
• Full load current: 1.3A
• Weight: 7.3kg
• Intake, exhaust port diameter: O.Df10 x I.Df6mm (G1/4)
• Operating surrounding atmosphere temperature: 0 - 40?
• Thermal protector: Internal
• Maximum dimensions: 142 x 288.5 x 202mm
• Corrosion resistance type
• Country of origin: Japan

• Model number: DA-15D
• Discharge air volume: 12/15 (L/min)
• Exhaust speed (L/min): 12/15
• Achieving pressure (kPa): 6.65
• Inlet diameter (OD) x (ID) mm: 9 x 5
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 135 x 203 x 182
• Weight (kg): 3.9
• Gas contact unit material: Pump head/aluminum die cast, Valve/fluorine rubber, Diaphragm/NBR (nitrile rubber)
• Country of origin: Japan

• Model number: ?DA-20D
• Discharge air volume: 20/24 (L/min)
• Exhaust speed (L/min): 20/24
• Achieving pressure (kPa): 5.33
• Inlet diameter (OD) x (ID) mm: 9 x 5
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 118 x 242 x 178
• Weight (kg): 7.2
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/heat-resistant NBR (nitrile rubber)
• *Unloader valve is an option (A mechanism that eliminates the differential pressure between pump head and outside by inhaling outside air into the pump head when a diaphragm type dry vacuum pump stops operating).
• Country of origin: Japan

• Model number: DA-30S
• Discharge air volume: 24/30 (L/min)
• Exhaust speed (L/min): 24/30
• Achieving pressure (kPa): 26.6
• Inlet diameter (OD) x (ID) mm: 9 x 5
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 135 x 203 x 182
• Weight (kg): 3.9
• Gas contact unit material: Pump head/aluminum die cast, Valve/fluorine rubber, Diaphragm/NBR (nitrile rubber)
• Country of origin: Japan

• Model number: DA-30D
• Discharge air volume: 30/36 (L/min)
• Exhaust speed (L/min): 30/36
• Achieving pressure (kPa): 6.7
• Inlet diameter (OD) x (ID) mm: 9 x 5
• Internal thermal protector
• Power supply: 1f200-220V 50/60Hz
• Size (mm): 212 x 278 x 224.5
• Weight (kg): 11
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/NBR (nitrile rubber)
• Country of origin: Japan

• Model number: ?DA-40S
• Discharge air volume: 40/46 (L/min)
• Exhaust speed (L/min): 40/46
• Achieving pressure (kPa): 19.9
• Inlet diameter (OD) x (ID) mm: 9 x 5
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 128 x 242 x 178
• Weight (kg): 7.2
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/heat-resistant NBR (nitrile rubber)
• *Unloader valve is an option (A mechanism that eliminates the differential pressure between pump head and outside by inhaling outside air into the pump head when a diaphragm type dry vacuum pump stops operating).
• Country of origin: Japan

• Model number: DA-60S
• Exhaust speed (L/min): 60/72(50/60Hz)
• Achieving pressure (kPa): 21.3
• Inlet diameter (OD) x (ID) mm: 9 x 5
• Internal thermal protector
• Power supply: 1f200-220V 50/60Hz
• Size (mm): 212 x 278 x 224.5
• Weight (kg): 11
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/NBR (nitrile rubber)
• Country of origin: Japan

• Model number: ?DA-60D
• Exhaust speed (L/min): 60/72(50/60Hz)
• Achieving pressure (kPa): 3.32
• Inlet diameter (OD) x (ID) mm: 14 x 9
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 156 x 358 x 238
• Weight (kg): 19
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/EPDM (ethylene propylene rubber)
• *Unloader valve is an option (A mechanism that eliminates the differential pressure between pump head and outside by inhaling outside air into the pump head when a diaphragm type dry vacuum pump stops operating).
• Country of origin: Japan

• Model number: ?DA-120S
• Exhaust speed (L/min): 120/144
• Achieving pressure (kPa): 13.3
• Inlet diameter (OD) x (ID) mm: 14 x 9
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 162 x 358 x 238
• Weight (kg): 19
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/EPDM (ethylene propylene rubber)
• *Unloader valve is an option (A mechanism that eliminates the differential pressure between pump head and outside by inhaling outside air into the pump head when a diaphragm type dry vacuum pump stops operating).
• Country of origin: Japan