AS ONE Corporation

• Highest temperature: 450?
• Model number: AFR-20
• For flask
• Capacity: 2000mL
• Power supply: 230V?5%
• Country of origin: Japan
• With input regulator

• Highest temperature: 450?
• Model number: AFR-30
• For flask
• Capacity: 3000mL
• Power supply: 230V?5%
• Country of origin: Japan
• With input regulator

• Highest temperature: 450?
• Model number: AFR-50
• For flask
• Capacity: 5000mL
• Power supply: 230V?5%
• Country of origin: Japan
• With input regulator

• Highest temperature: 450?
• Model number: AFR-100
• For flask
• Capacity: 10000mL
• Power supply: 230V?5%
• Electric capacity (power 100V): 1200W
• Country of origin: Japan
• With input regulator

• Water purifying method: Distillation
• Production of distilled water: Approx. 1.6L/h
• Collection of distilled water: Approx. 2.2 L/min.
• Raw water pressure range: 0.5~5 x 100 kPa (0.5~5 kg/cm2)
• Boiler material: Stainless steel
• Distilled water storage tank: 20L polyethylene tank
• External dimentions(WxDxH): 500?400?974mm
• Power supply: AC220V 50/60Hz single phase 7A (plug is not included)
• Weight; Approx. 30kg
• Accessories: Water supply hose and a fitting with stopper x 1, Scale cleaner (1kg) x 1, Drain hose Assy x 1, manual

• Water purifying method: Distillation
• Production of distilled water: Approx. 1.7L/h
• Collection of distilled water: Approx. 2.2 L/min.
• Raw water pressure range: 0.5~5 x 100 kPa (0.5~5 kg/cm2)
• Boiler material: Hard glass
• Distilled water storage tank: 20L polyethylene tank
• External dimentions(WxDxH): 500?400?974mm
• Power supply: AC220V 50/60Hz single phase 7A (plug is not included)
• Weight; Approx. 30kg
• Accessories: Water supply hose and a fitting with stopper x 1, Scale cleaner (1kg) x 1, Drain hose Assy x 1, manual

• Model number: AGZ3
• Size (mm): 164.6 x 25 x 135.8
• Weight (g) * 1: 200
• Output voltage: approximately 2500 V AC
• Air pressure: 0.05 to 0.6 MPa
• Air flow rate: 370 L/min (MAX at 0.6 MPa)
• ion balance: ? 15 V or less (Distance 100 mm)
• Ozone generation: 0.04 ppm or less (Distance 150 mm)
• power supply: DC24V (AC adapter attached AC100V~AC240V)
• Air coupling: outer diameter f6 mm
• * Compressor is not included
• * excluding cables

• Outer dimension (mm): 300 x 440 x 390
• Inner furnace dimension (mm): 120 x 225 x 110
• Capacity (L): 3
• Operating temperature range: 100? - 1150? (0.5? unit)
• Temperature distribution accuracy: +/- 3? at 1000?
• Temperature rise time: Approx 40 minutes, room temperature -> 1150?
• Control system: Program operation (50 patterns, 100 segments)
• Temperature sensor: K class thermocouple
• Heater capacity: 1.2kW
• Furnace body: Ceramic fiber
• Safety device: Overcurrent breaker, Excessive temperature rise setting device, Door opening and closing sensor, Key lock function, Exterior temperature sensitive type cooling fan, Microcomputer abnormality detection device (heater disconnection, Thermocouple disconnection, Memory content abnormality, Excessive temperature rise abnormality, Control substrate abnormality)
• External output: Recorder thermocouple output, Output for automatic gas introduction 1 - 2, Event contact output 1 - 4, Output for deodorizer, During-operation, end, alarm contact output, 3-color patolight output, SD card slot
• Exhaust port diameter: f23.5mm
• Weight: 22kg
• Power: AC220V
• Current capacity*: 12A (*All numerical data are representative values and are not guaranteed values. *Please prepare plenty of current capacity for power equipment. )
• Accessories: Furnace setter plate, Exhaust port plug, Exhaust sleep, AC cord (300-Plus is attached to the body)
• Option (sold separately): Deodorizer (ES71, ES72) Ventilator (VF71, VF72), Gas introduction unit (KDG-300, -1500, -3000, -5000), 3-color patolight, Different system excessive temperature rise sensor, Body fixing fitting unit, Electrical leakage breaker, Platinel thermocouple, wagon (KDW-100, KDW-200), Temperature sensor for recorder output
• *Vacuum gas replacement furnace type is also available. Please contact with us.
• Model number: 300Plus
• Country of origin: Japan

• Outer dimension (mm): 400 x 470 x 450
• Inner furnace dimension (mm): 160 x 245 x 130
• Capacity (L): 5.1
• Operating temperature range: 100? - 1150? (0.5? unit)
• Temperature distribution accuracy: +/- 3? at 1000?
• Temperature rise time: Approx 28 minutes, room temperature -> 1150?
• Control system: Program operation (50 patterns, 100 segments)
• Temperature sensor: K class thermocouple
• Heater capacity: 1.8kW
• Furnace body: Ceramic fiber
• Safety device: Overcurrent breaker, Excessive temperature rise setting device, Door opening and closing sensor, Key lock function, Exterior temperature sensitive type cooling fan, Microcomputer abnormality detection device (heater disconnection, Thermocouple disconnection, Memory content abnormality, Excessive temperature rise abnormality, Control substrate abnormality)
• External output: Recorder thermocouple output, Output for automatic gas introduction 1 - 2, Event contact output 1 - 4, Output for deodorizer, During-operation, end, alarm contact output, 3-color patolight output, SD card slot
• Exhaust port diameter: f23.5mm
• Weight: 33kg
• Power: AC220V
• Current capacity*: 9A (*All numerical data are representative values and are not guaranteed values. *AC cord 3m, 5.5SQ, with grounding (with crimp terminal conforming to M5 screw) *Please prepare plenty of current capacity for power equipment. )
• Accessories: Furnace setter plate, Exhaust port plug, Exhaust sleep, AC cord (300-Plus is attached to the body)
• Option (sold separately): Deodorizer (ES71, ES72) Ventilator (VF71, VF72), Gas introduction unit (KDG-300, -1500, -3000, -5000), 3-color patolight, Different system excessive temperature rise sensor, Body fixing fitting unit, Electrical leakage breaker, Platinel thermocouple, wagon (KDW-100, KDW-200), Temperature sensor for recorder output
• *Vacuum gas replacement furnace type is also available. Please contact with us.
• Model number: 500Plus
• Country of origin: Japan

• Outer dimension (mm): 570 x 575 x 510
• Inner furnace dimension (mm): 230 x 305 x 200
• Capacity (L): 14
• Operating temperature range: 100? - 1150? (0.5? unit)
• Temperature distribution accuracy: +/- 3? at 1000?
• Temperature rise time: Approx 25 minutes, room temperature -> 1150?
• Control system: Program operation (50 patterns, 100 segments)
• Temperature sensor: K class thermocouple
• Heater capacity: 3.6kW
• Furnace body: Ceramic fiber
• Safety device: Overcurrent breaker, Excessive temperature rise setting device, Door opening and closing sensor, Key lock function, Exterior temperature sensitive type cooling fan, Microcomputer abnormality detection device (heater disconnection, Thermocouple disconnection, Memory content abnormality, Excessive temperature rise abnormality, Control substrate abnormality)
• External output: Recorder thermocouple output, Output for automatic gas introduction 1 - 2, Event contact output 1 - 4, Output for deodorizer, During-operation, end, alarm contact output, 3-color patolight output, SD card slot
• Exhaust port diameter: f23.5mm
• Weight: 49kg
• Power: AC220V
• Current capacity*: 18A (*All numerical data are representative values and are not guaranteed values. *AC cord 3m, 5.5SQ, with grounding (with crimp terminal conforming to M5 screw) *Please prepare plenty of current capacity for power equipment. )
• Accessories: Furnace setter plate, Exhaust port plug, Exhaust sleep, AC cord (300-Plus is attached to the body)
• Option (sold separately): Deodorizer (ES71, ES72) Ventilator (VF71, VF72), Gas introduction unit (KDG-300, -1500, -3000, -5000), 3-color patolight, Different system excessive temperature rise sensor, Body fixing fitting unit, Electrical leakage breaker, Platinel thermocouple, wagon (KDW-100, KDW-200), Temperature sensor for recorder output
• *Vacuum gas replacement furnace type is also available. Please contact with us.
• Model number: 1500Plus
• Country of origin: Japan

• Model number: DPM-MTSP
• Measurement wavelength (nm): 450 - 680
• Measuring method: Visible spectroscopy, absorptiometry (white color LED)
• Inspection water amount: 1.5mL
• Use cell: cup (1.5mL)
• Interface: USB, memory card
• Light-receiving part: CMOS with grating, linear image sensor
• Power supply: AC100 - 240V 50/60Hz (including AC adapter) or AA alkali dry cell x 6 pieces (included for test)
• Size: 200 x 180 x 85mm
• Weight: Approx 1.3kg
• Set content: Body, cup (1.5mL) x 5, Round cell bottle x 1, Memory card x 1, USB cable x 1

• Measurement range: Transmittance/0 - 100%T, Absorbance/0 - 1.999A, Concentration/0 - 1999C (1 - 1999F)
• Measurement accuracy: ?2%T
• Sample volume: 1.0mL
• Display: 3 1/2digits LCD
• With auto zero function
• Printer output: RS232C
• Power supply: 9V battery x 1 piece (included for test) or AC adapter100V-240V (included)
• Accessories: Filter set (405, 420, 460, 510, 540, 600, 660nm), Square cell (internal dimensions/10 x 10 x 45mm) x 2 pieces
• Model number: AP-1000M
• Size (mm): 120 x 180 x 70
• Weight (g): Approx 800

• External dimension:W525X D395 X H485mm
• Inner bath dimension:W480X D350 X H150mm
• Effective inner dimension :W405 X D350 X H150mm
• Temperature range:0?~+50?
• Temperature control:Temperature digital indicating PID control
• Temperature stability:?0.1?
• Refrigerator:Air- cooling 130W(HFC-134a)
• Heater:500W
• Agitator:10W motor
• Safety device:Earth leakage breaker?Over heating protection alarm?Liquid low level alarm
• Material:Inner basin :(SUS-304)
• Externalhousing: Steel plate with baked enamel finish
• Power Supply:AC220V

• Input power: DC24V (AC adapter included AC100 - 240V correspondence)
• Capacity: 6VA
• Output voltage: ?7000V0-P
• Ozone generation amount: 0.004ppm or less (distance 150mm)
• Ion balance: ?10V or less (distance 300mm, Factory-configured)
• Air volume: 0.7~1.2m3/min
• Wind speed: 1.2 - 1.9m/sec (straight movement louver distance 300mm center), 0.7 - 1.2m/sec (wide angle louver distance 300mm center)
• Accessories: Wide angle louver, Lead wire for output signal connection, Cleaning brush
• Size (mm): 104 x 126 x 50
• Weight (kg): 5.6
• WINSTAT
• Model number: BF-XMB

• Size (mm): 150 x 182 x 76
• Weight (kg): 1
• Ozone generation: 0.004 ppm or less (Distance 150 mm)
• Ion Balance (Distance 300 mm, Factory Default): ? 3 V or Less
• air volume : 1.4 to 3.5 m3/min
• Wind velocity: 1.5 to 2.9 m/sec (Straight Louver Distance 300 mm Center), 0.1 to 0.3 m/sec (Wide-angle Louver Distance 300 mm Center)
• Input power supply: DC24V (AC Adapter Included AC100 to 240 V Compatible)
• capacity: 12 VA
• Output Voltage: ? 7,500 V 0-P
• Accessories: AC adapter, wide-angle louver, lead wire for output signal (2 pieces Gumi)
• ?Static Elimination Time: 1.5 Seconds or Less (Distance 300 mm, Factory Default)
• ?environment used : Ambient Temperature : 0 to 40 ? C Ambient Humidity : 15 to 85 %RH (noncondensing)
• ?filters: prefilter class
• ?Output Signal: MOS FET Relay Non-Voltage Contact Output (NC Output) (OFF at high voltage error or fan error)
• ?Noise: 63 dB (A) (Distance 1m)
• ?material: Body/ABS Plastic, Discharge Needle/Tungsten, Stand/SECC, Louver/PC/ASA

• Model number: BF-X2DD
• Size (mm) * 1: 150 x 62 x 182
• Weight (g) * 2: 900
• ion balance: ? 20 V or less (Distance 300 mm)
• air volume: 1.7 to 3.6 m3/min
• Ozone concentration: 0.007 ppm or less (Distance 150 mm Center)
• Noise: 62 dB (A)
• Input power supply: DC24V (Equipped with AC adapter and AC100 to 240 V)
• capacity: 15 VA
• Output voltage: DC ? 7.5 kV
• Cleaning brush
• * 1: Excluding projections
• * 2: Includes stand
• Winstat

• Circulation method: Forced air circulation
• Operating temp. range: RT+10~210?
• Temp. adjustment accuracy: ?1.0?(at210?) JTM K05
• Temp. distribution accuracy: ?2.5?(at210?)JTM K05
• Max. temp. reaching time: Approx. 60 min
• Internal dimentions(WxDxH): 1070 x 500 x 1000mm
• External dimentions(WxDxH): 1180 x 651 x 1616mm
• Internal capacity: Approx. 535L
• No. of steps/pitch: 29 stepsx2/30mm
• Shelf load capacity : Approx. 15 kg/pc
• Power supply: AC220V 50/60Hz single phase 15A (plug is not included)
• Weight: Approx. 190kg
• Accessories: Stainless shelf x 8, Shelf bracket x 16, Manual

• Model number: SP-300
• Wavelength range (nm): 320 - 1000
• Size (mm): 330 x 270 x 130
• Weight (kg): 5
• Spectral width: 6nm
• Wavelength accuracy: ?2nm
• Wavelength reproducibility: ?1nm
• Measurement range: Absorbance/0.0 - 1.999Abs, Transmittance/0.0 - 100%T, Concentration/0.0 - 1999Conc..
• Photometric accuracy: ?1%T
• Light source: Tungsten halogen lamp 6V 10W
• Sample container: Test tube or angle cell
• Data output: Analog output, RS-232C
• Power supply: AC85 - 260V 50/60Hz
• Outlet shape: 3P

• Size (mm): Approx 240 x 158 x 52.5
• Weight (g): Approx 1010
• System: Scan method, tall ch insulation, balanced input
• Sampling cycle: 10ms - 1h (10 - 50ms is only for voltage, ch restriction applies depending on the sampling period)
• Alarm output: Number of channels/4ch
• PC I/F: Ethernet (10BASE-T/100BASE-TX), USB2.0 (Hi-Speed)
• Data retention function: Measurement data/direct recording to built-in memory or USB memory, Other/setting conditions, screen copy data can be stored in the built-in memory or USB memory
• Number of unit loading analog terminal: 1 unit (20ch) or expansion unit (maximum 200ch)
• Incorporated memory: 2GB (available to expand external USB memory)
• Supported OS: Windows(R)XP/Vista(TM)/7/8/8.1
• Power supply: AC100 - 240V, 50/60Hz, AC adapter (included) or DC drive (DC8.5 - 24V, optional)

• Model number: HM-42X
• Item to be measured: pH, ORP, ion, temperature
• Measurement range: pH0.000 - 14.000
• Measurement range: -2000.0 - 2000.0mV
• Measurement range: It depends on the used sensor
• Measurement range: 0.0 - 100.0?
• Memory: 2000 data
• Size: 130 x 230 x 60mm
• Power supply: 100 - 240VAC (including AC adapter)
• Weight: Approx 0.8kg
• pH electrode (included) GST-5841C
• Accessories: Standard solution (pH4.01, pH6.86) 500mL x 1 each, Reference electrode inner solution 50ml x 1 piece, Electrode holder, electrode attachment, electrode stand, inclined stand, poly beaker 150mL x 3 pieces, earthed line
• *Ion electrode is required separately for the ion measurement. Please contact with us.