AS ONE Corporation

• Inner diameter: f245mm
• Overall height: 296mm
• Accessories: Porcelain plate x 1 sheet
• Capacity: Approximately 9L
• Weight: 1.41kg
• Model number: Type 241
• Lightweight and tough desiccator made from polycarbonate.
• Porcelain plates are corrosion resistance and non-adhesiveness, and can put crucible on plate.

• Material: Body / PC (polycarbonate), O-Ring / NBR (nitrile rubber)
• Allowable vacuum: about 133 Pa (1 mmHg)
• Metal cock outer diameter: f9 mm
• inner diameter: f 306 mm
• overall height: 368 mm
• contents amount: about 19 L
• Accessories: porcelain Plate x 1 piece
• Type number: 300
• With cock
• Weight (kg): 2.9
• Recommended vacuum pumps: Dry vacuum pumps DTC-22, (1-671-06) Dry vacuum pumps DA-20 D, (1-672-07) oil rotation vacuum pumps G-50 SA (1-4148-11)
• It is lightweight and tough vacuum desiccator made from PC (polycarbonate).
• Precise molding processing is given so that vacuum can be held without junction's attaching grease(O-ring provided).
• Plates made from porcelain are excellent in corrosion resistance, and non-adhesiveness, and can put reaction crucible.
• 240G and 300G are provided with vacuum meter.
• G2 type is equipped 2 stopcocks.

• Material: Main body / transparent reinforced PMMA (acrylic) (plate thickness: 25 mm), valve vacuum gauge mounting / PC (polycarbonate)
• Allowable vacuum: 1 Torr (about 133 Pa)
• shelf board Dimensions: 257 x 257 x 4 tmm
• number of shelves: 4 stages (Shelf interval : 85 mm)
• shelf board Load tolerance: about 2 kg / stage (equal load)
• Capacity: 30 L
• Weight: 23 kg
• Outlet with external switch (100 V 15 A1 series) 2 pieces
• Type number: VLH-C type
• external dimension (mm): 310 x 333 x 520
• inner size (mm): 260 x 280 x 410
• With outlet
• Vacuum valve: Small / outer diameter mm outer diameter f8 / mm / AC100V / 1 piece / power supply A3 cord with a cord of approx. 2.9 m with OA adapter, 1 piece 15 A3 P x 1 port, power cord switch (Each 1 piece): 1 piece 14 A cord with OA adapter x shelf board, silica gel plate x 3 pieces 1 piece
• Recommended vacuum pumps: Dry vacuum pumps DTC-22, (1-671-06) Dry vacuum pumps DA-20 D, (1-672-07) oil rotation vacuum pumps G-50 SA (1-4148-11)

• Material: Main body / transparent reinforced PMMA (acrylic) (plate thickness: 20 mm), valve vacuum gauge mounting / PC (polycarbonate)
• Allowable vacuum: 1 Torr (about 133 Pa)
• shelf board Dimensions: 257 x 171 x 4 tmm
• number of shelves: 2 stages (shelf board interval : 100 mm)
• shelf board Load tolerance: about 2 kg / stage (equal load)
• Capacity: 12 L
• Weight: 11 kg
• Outlet with external switch 100 V 15 A 1 Chain with 1 piece
• Model Number: VL type
• external dimension (mm): 300 x 222 x 360
• inner size (mm): 260 x 180 x 260
• With outlet
• Vacuum valve: Small / outer diameter mm outer diameter f8 / mm / AC100V / 1 piece / power supply A3 cord with a cord of approx. 2.9 m with OA adapter, 1 piece 15 A3 P x 1 port, power cord switch (Each 1 piece): 1 piece 14 A cord with OA adapter x shelf board, silica gel plate x 2 pieces 1 piece
• Recommended vacuum pumps: Dry vacuum pumps DTC-22, (1-4148-11) (1-671-06) Dry vacuum pumps DA-20 D, (1-672-07) oil rotation vacuum pumps G-50 SA
• * Excluding projections.

• Material: Main body / transparent reinforced PMMA (acrylic) (plate thickness: 25 mm), valve vacuum gauge mounting / PC (polycarbonate)
• Allowable vacuum: 1 Torr (about 133 Pa)
• shelf board Dimensions: 398 x 260 x 4 tmm
• number of shelves: 3 stages (Shelf interval : 96 mm)
• shelf board Load tolerance: about 2 kg / stage (equal load)
• Capacity: 48 L
• Weight: 35 kg
• Model Number: VW
• external dimension (mm): 550 x 452 x 590
• inner size (mm): 400 x 300 x 400
• No outlet
• Accessories: vacuum valves: small / outer diameter f8 mm, large / outer diameter f 14 mm (Each 1 piece), vacuum gauge x 1 piece, shelf board ? 2 pieces manufactured by PMMA (acrylic), silica gel plate ? 1 piece
• Recommended vacuum pumps: (1-672-07) oil rotation vacuum pumps G-50 SA, (1-4148-05) Dry vacuum pumps DTC-60, (1-671-11) Dry vacuum pumps DA-60 D

• Material: Main body / transparent reinforced PMMA (acrylic) (plate thickness: 25 mm), valve vacuum gauge mounting / PC (polycarbonate)
• Allowable vacuum: 1 Torr (about 133 Pa)
• shelf board Dimensions: 398 x 260 x 4 tmm
• number of shelves: 3 stages (Shelf interval : 96 mm)
• shelf board Load tolerance: about 2 kg / stage (equal load)
• Capacity: 48 L
• Weight: 35 kg
• Outlet with external switch 100 V 15 A 1 Chain with 2 pieces
• Type number: VW-C type
• external dimension (mm): 550 x 452 x 590
• inner size (mm): 400 x 300 x 400
• With outlet
• Accessories: V outer diameter acuum Valve: mm, outer diameter 14, 15 mm 2.9, AC100V 2 pieces power supply, 2 pieces, 1 piece, power cord, shelf board, 2 pieces and (Each 1 piece) 1 piece (acrylic)
• Recommended vacuum pumps: (1-672-07) oil rotation vacuum pumps G-50 SA, (1-4148-05) Dry vacuum pumps DTC-60, (1-671-11) Dry vacuum pumps DA-60 D

• Material: Main body / transparent reinforced PMMA (Acrylic Plastic) (plate thickness: 20 mm), valve vacuum mounting unit / PC (polycarbonate)
• Allowable vacuum: 1 Torr (about 133 Pa)
• Capacity: 7L
• Weight: 10 kg
• Type number: VS type
• external dimension (mm): 300 x 300 x 170
• inner size (mm): 260 x 260 x 100
• No outlet
• Accessories: vacuum gauge x 1 piece, silica gel plates x 1 piece, vacuum valves: small / outer diameter f8 mm, large / outer diameter f 14 mm (Each 1 piece)
• Recommended vacuum pumps: (1-4148-11) Dry vacuum pumps DTC-22, (1-671-06) Dry vacuum pumps DA-20 D
• High silicon packing of sealing nature is used so there is no necessity for grease.
• Suitable as storage warehouse of sample in compact flat size.

• main body material: Body / Transparent Reinforced PMMA (acrylic) plate thickness 5 mm, top board bottom plate / reinforced PMMA (acrylic) plate thickness 10 mm, valve vacuum gauge mounting / PC (polycarbonate)
• Weight: 1.4 kg
• Allowable vacuum: 1 Torr (about 133 Pa)
• Model Number: VR type
• external dimension (mm): 168 ? 330 * vacuum meter
• inner size (mm): 140 x 200
• Accessories: vacuum valve: outer diameter f 14 mm x 1 piece, vacuum gauge x 1 piece
• Recommended vacuum pumps: (1-4148-11) Dry vacuum pumps DTC-22, (1-671-06) Dry vacuum pumps DA-20 D

• Material: PE (Polyethylene)
• Unit area: 2,800 pcs/m2
• Temperature of continuous using: -80?
• Size: f20mm
• Quantity: 1 box (500 pcs)
• Special hollow molded and there is no mouth, liquid does not permeate inside.
• Lightweight and will not be corroded.
• The prevention effect for evaporation is great, there is no heat loss and is economical.

• external dimension: f 220 x 121 mm
• temperature settings range: R.T. + 5 to 95 ? C
• tank inner size: f 210 x 120 mm
• power supply: AC100V 50 / 60Hz
• power cord: 1.8 m (3P Plug)
• Maximum power: 750 W
• Maximum temperature: 95 ? C
• temperature controller: bimetal style
• Temperature accuracy: ? 2 ? C
• Weight: 1.4 kg
• material: Tank / stainless steel (SUS304), pipe heater / brass nickel plating
• Safety device: Overcurrent fuse
• Model Number: IWB-100

• Model number: Acrylic water tank (small)
• Outer dimension (mm): 410 x 310 x 200
• Chamber dimensions (mm): 390 x 290 x 195
• Material: PMMA (acrylic)
• Capacity: 18L
• Allowable temperature limit: 30?

• Model number: Acrylic water tank (large)
• Outer dimension (mm): 456 x 316 x 200
• Chamber dimensions (mm): 440 x 300 x 195
• Material: PMMA (acrylic)
• Capacity: 21L
• Allowable temperature limit: 30?

• Digital incubator flat type, with water tank (body)
• Size (mm): 105 x 160 x 281
• Weight: 2.2kg
• Temperature settings range: Room temperature +5 - 80?
• Temperature control accuracy: +/- 0.1?
• Temperature control system: Digital display, PID control
• Heater unit size: 140mm
• Heater capacity: 700W
• Agitator: Jet pump
• Protective device: With float type no-water burning prevention function
• Power supply: 100VAC 50/60Hz
• Power cord length: 1.8m (3P plug)
• Accessories: Thermometer
• Model number: HT-100VND
• Possible to set main body simply by placing it in corner of shallow water bath.
• Float type dry heating protector is provided.
• When used with transferring branch pipe, possible to circulate constant temperature water through external sealed water bath.
• Possible to used as constant temperature bath excellent in accuracy by setting it in even plastic container or stainless steel tray.
• HT-100VND can adjust flow rate and is provided with water bath(outer dimensions:334?198?158*mm*).

• Highest water pressure: Approximately 0.69MPa (7kg/cm2)
• Available water temperature: 90?
• Clamp mounting width: Within +/- 30?
• Power supply: 100VAC 50/60Hz
• Power cord length: 1.8m (3P plug)
• Setting water level: 20 - 70mm from water tank edge
• Model number: HCL-10-R
• When water level becomes below setup, water will besupplied automatically and fixed water level will be held.
• Please use connecting to the thermostat.

• Model number: BLG-2
• Rotation speed: 1500rpm
• Torque: 0.3N?m (3kg, cm)
• Rotation Control: Speed feedback control
• Motor output: 80W (DC brushless motor)
• Main unit size: 110 x 229 x 147mm
• Weight: 3.7kg
• Power supply: 100VAC 50/60Hz
• Viscosity range (1000cps/L): 20
• Accessories: Clamp holder x 1 piece, Marine type propeller f50mm x 1 piece, f8 x 500mm shaft x 1 piece
• Brushless type
• *Stand is not included in the package.
• Since it has built-in thermal protector, and automatically stop overload heat time.

• Model number: BLG-3
• Rotation speed: 750rpm
• Torque: 0.6N?m (6kg, cm)
• Rotation Control: Speed feedback control
• Motor output: 80W (DC brushless motor)
• Main unit size: 110 x 229 x 147mm
• Weight: 3.7kg
• Power supply: 100VAC 50/60Hz
• Viscosity range (1000cps/L): 50
• Accessories: Clamp holder x 1 piece, Marine type propeller f50mm x 1 piece, f8 x 500mm shaft x 1 piece
• Brushless type
• *Stand is not included in the package.
• Since it has built-in thermal protector, and automatically stop overload heat time.

• Model number: BLG-4
• Rotation speed: 375rpm
• Torque: 1.2N?m (12kg, cm)
• Rotation Control: Speed feedback control
• Motor output: 80W (DC brushless motor)
• Main unit size: 110 x 229 x 147mm
• Weight: 3.7kg
• Power supply: 100VAC 50/60Hz
• Viscosity range (1000cps/L): 100
• Accessories: Clamp holder x 1 piece, Marine type propeller f50mm x 1 piece, f8 x 500mm shaft x 1 piece
• Brushless type
• *Stand is not included in the package.
• Since it has built-in thermal protector, and automatically stop overload heat time.

• Model number: DC-CHRM25
• Rotation speed: 250 - 2500rpm (with tachometer)
• Torque: 0.20N?m (2kg, cm)
• Motor output: 60W (DC motor)
• Rotation Control: Thyristor control method
• Power supply: 100VAC 50/60Hz
• Size: 165 x 120 x 215mm
• Weight: 3.8kg
• Accessories: Clamp holder x 1 piece, Marine type stirring blade f50mm x 1 piece, Chuck handle x 1 piece, f8 x 500mm shaft x 1 piece
• *Stand is not included in the package.
• It is stirrer of low-cost type obtained high-speed and stable rotation.
• Stirring shaft is universal chuck that can be easily attached and detached.
• It is with rotating meter(DC-CHRM25).
• Since it has built-in thermal protector, and automatically stops for overload and overheating.

• Pressure Display Range: 0 - 0.1MPa
• Accuracy: ?1.6 - 2.4kPa
• Scale: 0.002MPa increments
• Size: 100 x 30 x 115mm, Pressure gauge/f50mm, Hose nipple/Outer diameter f8 x 25mm
• With Pressure gauge, Hose nipple

• Model number: J-5
• Size (mm): 320 x 380 x 480
• Plate size (effective width): 200 x 150
• Stroke: 0 - 110
• Pressure gauge: 0 - 5t (with left needle)
• Plate load: 0 - 5t
• Power supply: Without
• Weight: 35kg
• *it cannot hold pressure for long hours.
• *Pressure is recommended for use in 50% or more of the largest value.
• Peak hold meter*#?1#* with 2-pointers allows you to use the product as a convenient test device.?1 Example?1-pointer indicates 0 during crushing, and other pointer stops when break down pressure is reached.
• J-1MP:It is vice mechanism facilitates fine adjustment of weight.
• J-2DS:It is high accuracy load cell ensures digital display and accurate measurement of applied pressure.