AS ONE Corporation
External Circulation Nozzle
AS ONE Corporation
• External circulating nozzle
• Size: Outer diameter/f10mm, Inner diameter/f8.4mm
• Material: Stainless steel (SUS304) pipe
• Model number: TR-N
$0
Standard Desiccator Rubber Feet Specification
AS ONE Corporation
• Rubber feet specification
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Shelf board/stainless steel (SUS430), Leg/natural rubber
• Shelf board dimensions: 268 x 256 x 10mm
• Shelf board mounting pitch: 100mm (shelf rest position fixed), 4 stages
• Shelf board load capacity: Approximately 5kg/board
• Total withstand load: Approx 10kg
• Door specification: Draw latch type
• Weight: 6.4kg
• Size: 302 x 318 x 559mm
• Accessories: Shelf board x 2 (SUS430), Silica gel plate x 1 (polystyrene)
• Model number: SD-UTG
• Inside of body is highly airtight.
• Select rubber-foot type for installation on desktop or floor surface.Select caster type for installation under lab bench or transportation by each sample.
$0
Standard Desiccator Caster Specification
AS ONE Corporation
• Caster specification
• Material: Body/PMMA (acrylic resin), Frame/aluminum sash, Shelf board/stainless steel (SUS430)
• Shelf board dimensions: 268 x 256 x 10mm
• Shelf board mounting pitch: 100mm (shelf rest position fixed), 4 stages
• Shelf board load capacity: Approximately 5kg/board
• Total withstand load: Approx 10kg
• Door specification: Draw latch type
• Caster: F40mm Nylon made (with stopper)
• Weight: 6.8kg
• Size: 302 x 318 x 600mm
• Accessories: Shelf board x 2 (SUS430), Silica gel plate x 1 (polystyrene), Knob for moving x 1 piece
• Model number: SD-UTK
• Inside of body is highly airtight.
• Select rubber-foot type for installation on desktop or floor surface.Select caster type for installation under lab bench or transportation by each sample.
$0
Auto Dry Desiccator Rubber Feet Specification
AS ONE Corporation
• Auto dry type
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Shelf board/stainless steel (SUS430), Leg/natural rubber
• Dehumidification system: H2O electric decomposition discharge (using solid high polymer electrolyte membrane)
• Reaching humidity: Approximately 15%RH (after 12 hours, with no internal load, depending on the usage environment)
• Shelf board dimensions: 268 x 256 x 10mm
• Shelf board mounting pitch: 100mm (shelf rest position fixed) x 4 stages
• Shelf board load capacity: Approximately 5kg/board
• Total withstand load: Approx 10kg
• Door specification: Draw latch type
• Power supply: AC100V 50/60Hz 4W
• Power cord length: Approximately 2m (2P plug)
• Body weight: 7.2kg
• Accessories: Shelf board x 2 (SUS430)
• Model number: SP-UTG
• Rubber feet specification
• Size (mm): 302 x 318 x 559 (*The size excludes projections. *Temperature and humidity meter is not included. )
• UT-Lab.
• Inside of body is highly airtight.
• Select rubber-foot type for installation on desktop or floor surface.Select caster type for installation under lab bench or movement for each sample.
• This desiccator directly decomposes moisture inside chamber by electric current, and continuously removes it for stable dehumidification.
$0
Auto Dry Desiccator Caster Specification
AS ONE Corporation
• Auto dry type
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Shelf board/stainless steel (SUS430)
• Knob for moving: It can be attached to the left and right frame at the top of the aluminum frame
• Dehumidification system: H2O electric decomposition discharge (using solid high polymer electrolyte membrane)
• Reaching humidity: Approximately 15%RH (after 12 hours, with no internal load, depending on the usage environment)
• Shelf board dimensions: 268 x 256 x 10mm
• Shelf board mounting pitch: 100mm (shelf rest position fixed) x 4 stages
• Shelf board load capacity: Approximately 5kg/board
• Total withstand load: Approx 10kg
• Door specification: Draw latch type
• Caster: F40mm Nylon made (with stopper)
• Power supply: AC100V 50/60Hz 4W
• Power cord length: Approximately 2m (2P plug)
• Body weight: 7.6kg
• Accessories: Shelf board x 2 (SUS430), knob for moving x 1
• Model number: SP-UTK
• Caster specification
• Size (mm): 302 x 318 x 600 (*The size excludes projections. )
• UT-Lab.
• *Temperature and humidity meter is not included.
• Inside of body is highly airtight.
• Select rubber-foot type for installation on desktop or floor surface.Select caster type for installation under lab bench or movement for each sample.
• This desiccator directly decomposes moisture inside chamber by electric current, and continuously removes it for stable dehumidification.
$0
Auto Dry Desiccator UT - Preliminary Shelves
AS ONE Corporation
• Material: Stainless steel (SUS430)
• Dimensions: 268 x 256 x 10mm
• Withstand load: Approximately 5kg/board
• Model number: UT-spare shelf board
$0
Slide Glass Dryer Fan
AS ONE Corporation
• Material: Body/steel, melamine baking coating, Adjuster pair/ABS resin, steel, Rubber pair/EVA resin
• Drying method: Fan blast
• Air volume: 0.57/0.67m3/min (50/60Hz)
• Air volume control method: Fixed set (ON/OFF by switch)
• Power supply: AC100V 50/60Hz
• Power consumption: 6W
• Power cord length: Approximately 2m (3P plug)
• Model number: SGD-F
• Fan
• Size (mm): 300 x 174 x 120
• Weight (kg): 2.2
• *Size excluding projections.
• These products can dry glass slides sample quickly.
• Adjuster changes air blow direction.
• Hot air type(SGD-HF) can control with heat adjuster air blow temperature.
$0
Slide Glass Dryer Fan + Heater
AS ONE Corporation
• Material: Body/steel, melamine baking coating, Adjuster pair/ABS resin, steel, Rubber pair/EVA resin
• Drying method: Heater heating blower
• Air volume: 0.57/0.67m3/min (50/60Hz)
• Air volume control method: Fixed set (ON/OFF by switch)
• Heater control method: Analog control instrument control (with OFF function)
• Heater capacity: 150W
• Safety mechanism: Heater force interception, warning lamp lights in Internal temperature 60? or higher.
• Power supply: AC100V 50/60Hz
• Power consumption: 150W
• Power cord length: Approximately 2m (3P plug)
• Model number: SGD-HF
• Fan + heater
• Size (mm): 300 x 174 x 120
• Weight (kg): 2.6
• These products can dry glass slides sample quickly.
• Adjuster changes air blow direction.
• Hot air type(SGD-HF) can control with heat adjuster air blow temperature.
$0
Mantle Heater
AS ONE Corporation
• Maximum operating temperature: 450?
• Power supply: 100VAC 50/60Hz
• Model number: HF-100S
• Flask capacity: 100mL
• Electric capacity: 80W
• For flask
• *Use in combination with voltage controller or temperature controller.
• Body casing is special powder coating, and is excellent in heat and chemical resistance.
• Electrically heated wire is knitting both non-asbestos glass fiber and nichrome wire by hand, and is excellent in heat exchange nature.
• Excellent In insulation properties by ceramic wool used.
$0
Mantle Heater
AS ONE Corporation
• Maximum operating temperature: 450?
• Power supply: 100VAC 50/60Hz
• Model number: HF-200S
• Flask capacity: 200mL
• Electric capacity: 130W
• For flask
• *Use in combination with voltage controller or temperature controller.
• Body casing is special powder coating, and is excellent in heat and chemical resistance.
• Electrically heated wire is knitting both non-asbestos glass fiber and nichrome wire by hand, and is excellent in heat exchange nature.
• Excellent In insulation properties by ceramic wool used.
$0
Mantle Heater
AS ONE Corporation
• Maximum operating temperature: 450?
• Power supply: 100VAC 50/60Hz
• Model number: HF-500S
• Flask capacity: 500mL
• Electric capacity: 220W
• For flask
• *Use in combination with voltage controller or temperature controller.
• Body casing is special powder coating, and is excellent in heat and chemical resistance.
• Electrically heated wire is knitting both non-asbestos glass fiber and nichrome wire by hand, and is excellent in heat exchange nature.
• Excellent In insulation properties by ceramic wool used.
$0
Mantle Heater
AS ONE Corporation
• Maximum operating temperature: 450?
• Power supply: 100VAC 50/60Hz
• Model number: HF-1000S
• Flask capacity: 1000mL
• Electric capacity: 300W
• For flask
• *Use in combination with voltage controller or temperature controller.
• Body casing is special powder coating, and is excellent in heat and chemical resistance.
• Electrically heated wire is knitting both non-asbestos glass fiber and nichrome wire by hand, and is excellent in heat exchange nature.
• Excellent In insulation properties by ceramic wool used.
$0
Mantle Heater Regulator
AS ONE Corporation
• Maximum operating temperature: 450?
• Power supply: 100VAC 50/60Hz
• Model number: HB-300T
• For beaker
• Capacity: 300mL
• Electric capacity (electricity 100V): 150W
• With input regulator
• Body casing is special powder coating, and is excellent in heat and chemical resistance.
• Electrically heated wire is knitting both non-asbestos glass fiber and nichrome wire by hand and is excellent in heat exchange nature.
• Excellent in insulation properties by ceramic wool used.
• Since it is with input regulator, temperature control is possible.
$0
Mantle Heater Regulator
AS ONE Corporation
• Maximum operating temperature: 450?
• Power supply: 100VAC 50/60Hz
• Model number: HB-500T
• For beaker
• Capacity: 500mL
• Electric capacity (electricity 100V): 220W
• With input regulator
• Body casing is special powder coating, and is excellent in heat and chemical resistance.
• Electrically heated wire is knitting both non-asbestos glass fiber and nichrome wire by hand and is excellent in heat exchange nature.
• Excellent in insulation properties by ceramic wool used.
• Since it is with input regulator, temperature control is possible.
$0
Mantle Heater Regulator
AS ONE Corporation
• Maximum operating temperature: 450?
• Power supply: 100VAC 50/60Hz
• Model number: HB-1000T
• For beaker
• Capacity: 1000mL
• Electric capacity (electricity 100V): 300W
• With input regulator
• Body casing is special powder coating, and is excellent in heat and chemical resistance.
• Electrically heated wire is knitting both non-asbestos glass fiber and nichrome wire by hand and is excellent in heat exchange nature.
• Excellent in insulation properties by ceramic wool used.
• Since it is with input regulator, temperature control is possible.
$0
Mantle Heater Regulator
AS ONE Corporation
• Maximum operating temperature: 450?
• Power supply: 100VAC 50/60Hz
• Model number: HB-2000T
• For beaker
• Capacity: 2000mL
• Electric capacity (electricity 100V): 460W
• With input regulator
• Body casing is special powder coating, and is excellent in heat and chemical resistance.
• Electrically heated wire is knitting both non-asbestos glass fiber and nichrome wire by hand and is excellent in heat exchange nature.
• Excellent in insulation properties by ceramic wool used.
• Since it is with input regulator, temperature control is possible.
$0
Simplified Agitator General-Purpose Small Type
AS ONE Corporation
• Model number: SS-P1
• Specification: General-purpose small type
• Motor unit size (mm): 110 x 80 x 100
• Motor output: 25W
• Power supply: 100VAC 50/60Hz
• Rotation speed control range: 90 - 1400rpm (50Hz), 90 - 1700rpm (60Hz)
• Rotation speed control system: Analog knob type
• Maximum torque: 0.14N?m (at 1200rpm)
• Weight: Body/3.6kg, Remote control unit/0.4kg
• Remote control unit size: 76 x 116 x 116mm
• Applicable stand strut diameter: f16mm
• Accessories: Stirring rod (f8 x 300mm, with propeller type stirring blade f61mm), Cross clamp
• *When using, please use a stirring rod whose mounting portion is made of metal.
• *Stand and clamp with holder are not included in the package.
• *For parts for this product, see AXEL.
• Swing bracket is adopted to enable to change the mounting angle.
• The control unit is a remote, therefore stirring inside a fume hood is also easy.
• SS-P2F is a flexible type, which can be operated flexibly.
$0
Simplified Agitator Medium Type with Flexible Wire
AS ONE Corporation
• Model number: SS-P2F
• Specification: Medium type with flexible wire
• Motor unit size (mm): 120 x 90 x 120
• Motor output: SS-P1/25W, SS-P2, P2F/40W
• Power supply: 100VAC 50/60Hz
• Rotation speed control range: 90 - 1400rpm (50Hz), 90 - 1700rpm (60Hz)
• Rotation speed control system: Analog knob type
• Maximum torque: 0.3/0.24N?m: (At 1200rpm)
• Weight: Body/6.0kg, Remote control unit/0.4kg
• Remote control unit size: 76 x 116 x 116mm
• Applicable stand strut diameter: f16mm
• Flexible wire length: 1500mm
• Accessories: Stirring rod (f8 x 300mm, with propeller type stirring blade f61mm), Cross clamp
• *When using, please use a stirring rod whose mounting portion is made of metal.
• *Stand and clamp with holder are not included in the package.
• *For parts for this product, see AXEL.
• Swing bracket is adopted to enable to change the mounting angle.
• The control unit is a remote, therefore stirring inside a fume hood is also easy.
• SS-P2F is a flexible type, which can be operated flexibly.
$0
Constant Temperature Water Circulator Cover Form
AS ONE Corporation
• Size: 410 x 388 x 13mm (excluding handle)
• Material: Hard PVC (vinyl chloride resin)
• Model number: Cover S type
• Excellent in corrosion resistant and durability because exterior/interior of water bath as well as exterior of controller are all made of stainless steel.
• Adopts jet stirring pump that maintains internal temperature distribution uniformly.
$0
Constant Temperature Water Circulator Cover
AS ONE Corporation
• Size: 410 x 388 x 110mm
• Material: Hard PVC (vinyl chloride resin)
• Model number: Cover L type
• Excellent in corrosion resistant and durability because exterior/interior of water bath as well as exterior of controller are all made of stainless steel.
• Adopts jet stirring pump that maintains internal temperature distribution uniformly.
$0