AS ONE Corporation
Magnetic Stirrer for S-1 Controller (4 Single Rotation)
AS ONE Corporation
• S-1 controller
• Corresponding stirrer: S-1
• Number of output terminals: f2.5mm mini jack x 4 pieces
• Rotation speed control: 4 output (separate rotation control)
• Control system: Electronic circuit rotation speed open loop structure
• Number of output terminals: f2.5mm mini jack AC x 4 pieces
• Material: Exterior/ABS resin
• Size: 95 x 158 x 56mm
• Power supply: 100VAC 50/60Hz 3P plug attached
• Model number: CS-4
$0
Magnetic Stirrer for B-1 Controller (4 Identical Rotation)
AS ONE Corporation
• B-1 controller
• Corresponding stirrer: B-1
• Number of output terminals: f2.5mm mini jack x 4 pieces
• Output system: 4 output same speed
• Control system: Electronic circuit rotation speed open loop structure
• Size: 95 x 158 x 56mm
• Power supply: 100VAC 50/60Hz
• Model number: CB-1
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers
$0
Magnetic Stirrer for B-1 Controller (4 Single Rotation)
AS ONE Corporation
• B-1 controller
• Corresponding stirrer: B-1
• Number of output terminals: f2.5mm mini jack x 4 pieces
• Output system: 4 output single speed
• Control system: Electronic circuit rotation speed open loop structure
• Size: 95 x 158 x 56mm
• Power supply: 100VAC 50/60Hz
• Model number: CB-4
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers
$0
Magnetic Stirrer
AS ONE Corporation
• Stirrer body (small)
• Stirred capacity: 10 - 1000mL
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Size: 70 x 70 x 29mm
• Used temperature: 0 - 60? (underwater)
• Structure: Silicone mold waterproof sealed structure
• Body material: PP (polypropylene) integral molding
• Cord: 1m x f2.5mm mini plug attached
• Model number: S-1
• Accessories: Joint bar x 1 piece
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers
$0
Magnetic Stirrer
AS ONE Corporation
• Stirrer body (large)
• Stirred capacity: 50 - 3000mL
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Size: 155 x 155 x 45mm
• Used temperature: 0 - 60? (underwater)
• Structure: Silicone mold waterproof sealed structure
• Body material: PP (polypropylene) integral molding
• Cord: 1m x f2.5mm mini plug attached
• Model number: B-1
• Accessories: Joint bar x 1 piece
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers
$0
Magnetic Stirrer for S-1 Joint Bar
AS ONE Corporation
• Stirrer for S-1
• Model number: Joint bar
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers
$0
Magnetic Stirrer for B-1 Joint Bar
AS ONE Corporation
• Stirrer for B-1
• Model number: Joint bar
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers
$0
Test Tube Mixer TRIO
AS ONE Corporation
• Model number: TM-1N
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 115 x 230 x 60mm
• Weight: 2.1kg
• Accessories: Single attachment x 1 piece
• Low Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
$0
Test Tube Mixer TRIO (Many Attachments)
AS ONE Corporation
• Model number: TM-1FN
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 115 x 230 x 60mm
• Weight: 2.1kg
• Accessories: Single/flat/tube attachment x 1 piece each, attachment/microplate/stirrer base x 1 piece each
• Low Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
$0
Test Tube Mixer TRIO
AS ONE Corporation
• Model number: TM-2N
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 115 x 230 x 60mm
• Weight: 2.1kg
• Accessories: Single attachment x 1 piece
• Low Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
$0
Tube Attachment For Test Tube Mixer TRIO
AS ONE Corporation
• Product name: Tube attachment
• *Can be used on all TRIO model tubes (Both Low Type and High Type).
• *AB is required to use TA.
$0
stirrer Base For Test Tube Mixer TRIO
AS ONE Corporation
• Model number: SB
• Product name: Starra-based
• *Can be used on all TRIO model tubes (Both Low Type and High Type).
$0
Test Tube Mixer TRIO
AS ONE Corporation
• Model number: HM-1N
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Flat attachment x 1 piece, attachment base x 1 piece
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).
$0
Test Tube Mixer TRIO (Many Attachments)
AS ONE Corporation
• Model number: HM-1FN
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Single/flat/tube attachment x 1 piece each, attachment/microplate/stirrer base x 1 piece each
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).
$0
Test Tube Mixer TRIO
AS ONE Corporation
• Model number: HM-2N
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Flat attachment x 1 piece, attachment base x 1 piece
• Rotation speed display: LED 10 steps
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).
$0
Hand Wrap (Glass) 170mL
AS ONE Corporation
• Model number: 200
• Material: Main / soda-lime glass, Lid / PP (polypropylene), pumps / brass Lid nickel plating, tube / PTFE (ethylene tetrafluoride)
• Capacity: 170 mL
• Diameter x overall height: f 85 x 108 mm
• Quantity: 1 piece
• Quantity entered: 10 pieces
• * Prices per 1 piece
• Code Number: 5005-12
• Certain amount of liquid comes out, and liquid can be saved.
• The mouth is not open, liquid does not evaporate.
• Liquid rarely spills out even when fell down.
• Liquid comes out by just light push head, brings high workability.
• Cap is attached on liquid exit port for not liquid jumping.
$0
Spare Cap And Pump Set for Hand Wrap 200
AS ONE Corporation
• Model number: 200 spare cap pumps set
• Material: Cap / PP (polypropylene), pumps, brass, and nickel plated
• A pre-cap pumps set for 200
• Quantity: 1 set
• Case input quantity: 10 sets
• * Price per set.
$0
Hand Wrap (Glass) 280mL
AS ONE Corporation
• Model number: 500
• Material: Main / soda-lime glass, Lid / PP (polypropylene), pumps / brass Lid nickel plating, tube / PTFE (ethylene tetrafluoride)
• Capacity: 280 mL
• Diameter x overall height: f 85 x 140 mm
• Quantity: 1 piece
• Quantity entered: 10 pieces
• * Prices per 1 piece
• Code Number: 5005-11
• Certain amount of liquid comes out, and liquid can be saved.
• The mouth is not open, liquid does not evaporate.
• Liquid rarely spills out even when fell down.
• Liquid comes out by just light push head, brings high workability.
• Cap is attached on liquid exit port for not liquid jumping.
$0
Preliminary Cap And Pump Set for Hand Wrap 500
AS ONE Corporation
• Model number: 500 spare cap pumps set
• Material: Lid / PP (polypropylene), pumps, brass, and nickel plated
• A pre-cap pumps set for 500
• Quantity: 1 set
• Case input quantity: 10 sets
• * Price per set
• Code Number: 5005-1102
$0
Earth Leakage Circuit Breaker ?
AS ONE Corporation
• Number of outlet: 5 pieces (with ground wire for 3 core plug)
• Electric capacity: Total of 100V15A
• Cord length: 3m
• Model number: I type
• Size (mm): 240 x 116 x 67
• Protected cover ensures not to shut down power to be hit by mistake during experiment.
• In the case capacity is exceeded, 15A breaker will be thrown automatically(manual recovery type).
• Every electric sockets are equipped with ON-OFF switch in addition to main switch and printed number(*01* type).
$0