AS ONE Corporation
Chair for Researcher with Back without Ring
AS ONE Corporation
• Model number: LC-60F (with back)
• Material: Seat part seat pad/Urethane foam forming (conductive type), Upholstery material of back part/upholstered with vinyl leather (conductive type), Tension glide/nylon (conductive type)
• Seat height: 395 - 485mm
• Seating surface angle adjustment: Forward tilting 5?, backward tilting 7?
• Size: 500 x 480 x 625 - 715mm
• Fixed leg type
• Tension glide (fixed leg) type assures stability.
• These products generate little dust caused by abrasion, and are suitable for using in clean room.
• The back, seating face and tension glide are conductive, and ideal for work ehich dislike static electricity
$0
Chair for Researcher with Back with Ring
AS ONE Corporation
• Model number: LC-60RF (with back)
• Material: Seat part seat pad/Urethane foam forming (conductive type), Upholstery material of back part/upholstered with vinyl leather (conductive type), Tension glide/nylon (conductive type)
• Seat height: 450 - 610mm
• Seating surface angle adjustment: Forward tilting 5?, backward tilting 7?
• Size: 500 x 480 x 670 - 830mm
• Fixed leg type
• Tension glide (fixed leg) type assures stability.
• These products generate little dust caused by abrasion, and are suitable for using in clean room.
• The back, seating face and tension glide are conductive, and ideal for work ehich dislike static electricity
$0
Low Bench
AS ONE Corporation
• Model number: LRBK-1
• Material: Leg/steel, Seat surface/urethane cushion, upholstered with vinyl leather
• Caster: f50mm made of nylon (two wheel x 4 pieces)
• Weight: 2.8kg
• Seat diameter x height: f360 x 235mm
• Casters enable easy movement in low posture.
• This product is stackable when not in use, and saves space.
$0
Slim Stirrer Same Rotation Control
AS ONE Corporation
• Same rotation control
• Number of stirring: 4
• Size: 499 x 100 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSS-4
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.
$0
Slim Stirrer Same Rotation Control
AS ONE Corporation
• Same rotation control
• Number of stirring: 5
• Size: 499 x 190 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSS-8
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.
$0
Safety Cabinet (3-Stage Drawer Type) 455 x 600 x 800mm
AS ONE Corporation
• Size (mm): 455 x 600 x 800
• Model number: TU-3E
• Amount of storage of reagent bottle: 500mL x 24 pieces x 3 stages
• Withstand load of drawer (kg): 30
• Body weight (kg): About 34
• Accessories: Metal parts for fixing to floor, up-down connecting metal parts x 4 pieces each, Shelf board x 1 piece, metal parts for fixing to floor, up-down connecting metal parts x 4 pieces each, Shelf board x 1 piece, metal parts for fixing to floor, up-down connecting metal parts x 4 pieces each, Shelf board x 1
• *Transportation cost is required separately. Please contact with us. *It is unusable in a top shelf.
• When one drawer is pulled out, safety mechanism locks other drawer.
• All drawers are locked with one key.
$0
Safety Cabinet (3-Stage Drawer Type) 705 x 600 x 800mm
AS ONE Corporation
• Size (mm): 705 x 600 x 800
• Model number: TU-5E
• Amount of storage of reagent bottle: 500mL x 42 pieces x 3 shelves
• Withstand load of drawer (kg): 40
• Body weight (kg): Approximately 50
• Accessories: Metal parts for fixing to floor, up-down connecting metal parts x 4 pieces each, Shelf board x 1 piece, metal parts for fixing to floor, up-down connecting metal parts x 4 pieces each, Shelf board x 1 piece, metal parts for fixing to floor, up-down connecting metal parts x 4 pieces each, Shelf board x 1
• *Transportation cost is required separately. Please contact with us. *It is unusable in a top shelf.
• When one drawer is pulled out, safety mechanism locks other drawer.
• All drawers are locked with one key.
$0
Name Plate
AS ONE Corporation
• Model number: SU-M
• Name plate (87 x 225mm)
• Quantity: 5 sheets
$0
Vacuum Desiccator 150 x 150 x 150mm
AS ONE Corporation
• Material: Main body / transparent reinforced PMMA (Acrylic Plastic), valve vacuum mounting unit / PC (polycarbonate)
• Capacity: about 1.3 L
• Allowable vacuum: 1 Torr (about 133 Pa)
• Weight: 3.7 kg
• Accessories: vacuum gauge ? 1 piece vacuum valve (outer diameter f 14 mm)
• Model number: VXS
• Size (mm): 150 x 150 x 150
• inner size (mm): 110 x 110 x 110
• Recommended vacuum pumps: (1-9197-01) Dry vacuum pumps DAP-6 D, (1-4148-11) Dry vacuum pumps DTC-22
• * The size is excluded from the projection.
• Highly-sealable silicon packing is used.
• Suitable for experiment with small mount of samples.
$0
Vacuum Desiccator 150 x 150 x 250mm
AS ONE Corporation
• Material: Main body / transparent reinforced PMMA (acrylic), valve vacuum mounting unit / PC (polycarbonate)
• Capacity: about 1.3 L
• Allowable vacuum: about 133 Pa
• Weight: 4.8 kg
• Accessories: vacuum gauge ? 1 piece vacuum valve (outer diameter f 14 mm) ? 1 piece
• external dimension (mm): 150 x 150 x 250
• inner size (mm): 110 x 110 x 210
• * The size is excluded from the projection
• Recommended vacuum pumps: (1-9197-01) Dry vacuum pumps DAP-6 D, (1-4148-11) Dry vacuum pumps DTC-22
• Model Number: VXH
• Highly-sealable silicon packing is used.
• Suitable for experiment with small mount of samples.
$0
Vacuum Desiccator 250 x 150 x 150mm
AS ONE Corporation
• Material: Main body / transparent reinforced PMMA (acrylic), valve vacuum mounting unit / PC (polycarbonate)
• Capacity: about 1.3 L
• Allowable vacuum: about 133 Pa
• Weight: 4.8 kg
• Accessories: vacuum gauge ? 1 piece vacuum valve (outer diameter f 14 mm) ? 1 piece
• external dimension (mm): 250 x 150 x 150
• inner size (mm): 210 x 110 x 110
• * The size is excluded from the projection
• Recommended vacuum pumps: (1-9197-01) Dry vacuum pumps DAP-6 D, (1-4148-11) Dry vacuum pumps DTC-22
• Model Number: VXL
• Highly-sealable silicon packing is used.
• Suitable for experiment with small mount of samples.
$0
Tank Detachable Water Bath
AS ONE Corporation
• Outer dimension (mm): 260 x 266 (280)*1 x 266
• Chamber dimensions (mm): f180 x 180
• Water tank volume: 4L
• Body material: Stainless steel (SUS430)
• Water tank material: Stainless steel (SUS316)
• Temperature settings range: Room temperature +5 - 80?
• Temperature display precision: +/- 2?
• Temperature sensor: K class thermocouple
• Temperature control system: Microcomputer PID control
• Timer setting range: 0 - 99 hours 59 minutes
• Attachable thermometer size: f7 - f10mm
• Safety device: Temperature excessive rise prevention device, overcurrent prevention fuse
• Heater capacity: Sheathed heater 800W
• Power supply: 100VAC 50/60Hz 850W
• Power cord: 2.5m (3P plug, with 2P conversion adapter)
• Weight: Approx 7kg
• Water tank removable type
• *1 ( ) is the dimension including protrusions.
• Model number: WB-80S
• Detachable water bath can be fully washed.
• Excellent in temperature distribution because water bath is heated from bottom and sides.
• Overheat protection device is provided as standard.
• Operation switches are panel waterproof types(IP67 compliant).
$0
Rotary Shaking Bath
AS ONE Corporation
• Shaking speed: 20mm (turning)/20 - 160rpm
• Number of shaking rack frames: f10mm test tube x 120
• Water tank material: Stainless steel (SUS304)
• Chamber capacity: 13L
• Turning shaking method
• Shaking table dimensions: 174 x 180 x 130mm
• Outer dimension (mm): 495 x 570 x 275
• Chamber dimensions (mm): 300 x 500 x 150
• Power supply: 100VAC, 50/60Hz, 100W
• Power cord length: 2.5m, 3P plug with ground pin (with 3P-2P conversion adapter), Accessories: Shaking rack (SUS304)
• Model number: SBR-20
• This product is shaking-type water bath with high stirring efficiency.
• Water bath is removable, so water can be replaced easily.
• This product works as constant-temperature shaking water bath when thermal-lobo series is installed.
• The shaking rack holding test tubes, and flasks, naving double spring structure.
$0
Rotary Shaking Bath
AS ONE Corporation
• Shaking speed: 20mm (turning)/20 - 160rpm
• Number of shaking rack frames: f10mm test tube x 252
• Water tank material: Stainless steel (SUS304)
• Chamber capacity: 20L
• Turning shaking method
• Shaking table dimensions: 244 x 290 x 130mm
• Outer dimension (mm): 420 x 450 x 275
• Chamber dimensions (mm): 230 x 390 x 150
• Power supply: 100VAC, 50/60Hz, 100W
• Power cord length: 2.5m, 3P plug with ground pin (with 3P-2P conversion adapter), Accessories: Shaking rack (SUS304)
• Model number: SBR-13
• This product is shaking-type water bath with high stirring efficiency.
• Water bath is removable, so water can be replaced easily.
• This product works as constant-temperature shaking water bath when thermal-lobo series is installed.
• The shaking rack holding test tubes, and flasks, naving double spring structure.
$0
Aluminum Beads Bath for Cool Plate
AS ONE Corporation
• Material: Aluminum (surface anodic oxide processing)
• Internal dimensions: 104 x 126 x 122mm
• Weight: Approx 1.8kg
• Size (mm): 120 x 142 x 130
• *You cannot contain liquid in aluminum beads bath.
• Model number: Aluminum beads bath
• A Peltier device is used to cool the plate surface constantly.(The temperature will not lower to or below 0? due to the excessive cooling prevention function.)
• When an aluminum block(sold separately)is used, the unit keeps the sample at a low temperature efficiently.
• The aluminum beads bath can keep the sample cool efficiently when used with aluminum beads.
• When used with a cold insulation box, samples can be kept cool more effectively as they are less susceptible to the ambient air.
• The cold insulation case allows the user to view the inside from the top and open/close the top cover.
$0
Cool Plate
AS ONE Corporation
• Main unit size (mm): 150 x 150 x 72
• Material: Plate/Aluminum
• Cooling plate temperature: about 4 ?C (Ambient temperature 24 ?C/Center)
• Temperature distribution accuracy: ?5 ?C
• Plate temperature difference: R.T. -20 ?C
• Power supply: AC100V 50/60Hz (Comes with DC 12 V5A AC adapter)
• Plate size: 150 x 150mm
• Weight: about 1.8kg
$0
Floater f10mm x 24 Holes 10 Sheets
AS ONE Corporation
• Model number: AHT
• Size (mm): 100 x 70 x 7
• Quantity: 1 bag (10 sheets)
• Material: Polyethylene foam
• Hole diameter: f10mm (24 hole)
• Each hole has 4 notches to prevent hole expansion.
$0
Sterilization Bamboo Skewer Ikt-?s 200/Bag x 5 Bags
AS ONE Corporation
• Model number: IKT-?S
• Quantity: 1 bag (200 pieces/bag x 5 bags)
• Material: Bamboo
• ? ray sterilized
• Length: Approx 90mm
• Sterilized by ?Rays so that they can be used immediately after opening.
• Simply burn tip after use for safe disposal.
$0
Water Bath WB-80M
AS ONE Corporation
• Outer dimension (mm): 260 x 266 (280)*1 x 241
• Chamber dimensions (mm): f180 x 180
• Water tank volume: 4L
• Body material: Stainless steel (SUS430)
• Water tank material: Stainless steel (SUS316)
• Temperature settings range: Room temperature +5 - 80?
• Temperature display precision: +/- 2?
• Temperature sensor: K class thermocouple
• Temperature control system: Microcomputer PID control
• Timer setting range: 0 - 99 hours 59 minutes
• Attachable thermometer size: f7 - f10mm
• Safety device: Temperature excessive rise prevention device, overcurrent prevention fuse
• Heater capacity: Sheathed heater 750W
• Power supply: 100VAC 50/60Hz 800W
• Power cord: 2.5m (3P plug, with 2P conversion adapter)
• Weight: Approx 4kg
• Round tank
• *1 ( ) is the dimension including protrusions.
• Model number: WB-80M
• Possible to regulate temperature accurately and stably by means of PID control.
• Operation switches are panel waterproof types(IP67 compliant).
$0
Mobile Unit (Ut-Lab.)
AS ONE Corporation
• Model number: IU-UT
• Size (mm): 410 x 470 x 600
• Weight: 13kg
• Material: Body/Steel, Top plate/wooden plywood
• Shelf board mounting pitch: 40mm
• Caster: Nylon, f38mm
• Top plate withstand load: 4kg (equal load)
• Accessories: Shelf board x 1
• UT-Lab.
• It consists of body composed of steel frames and unit that can be freely selected according to thing to be stored. It has excellent flexibility and can respond flexibly to changes in experiments and research contents.
• IU-UT?IUT-UT:Handle equipped both front and back, so possible to place both left or right.
• IUT-UT:Sliding top panel provided.
$0