AS ONE Corporation
AS FLON(R) PTFE Spatula Trapezoid Type Extra-Large
AS ONE Corporation
• material: PTFE (ethylene tetrafluoride)
• Shape: trapezoidal type
• spatula width x spatula height (mm): 120 x 85
• Total length (mm): 200
• Model Number: D special large
• End of spatula is tapered.
$0
Desktop Pot Mill Stand
AS ONE Corporation
• Model number: PM-001
• 1 rack
• Rotation speed: 40 - 280rpm
• Size: 406 x 290 x 240mm
• Weight: Approx 15kg
• Roller: f38 x 275mm (effective length/265mm)
• Applicable pot mill Size/f90 - 180mm, Weight/20kg
• Timer settings: 0 - 9 hours 59 minutes (1 minutes units)
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (with 3P plug earth, 2P - 3P conversion adapter)
• Rotation speed can be adjusted to achieve grinding in accordance with sample.
• Distance between the rollers can be adjusted according to the pot mill.
$0
Desktop Pot Mill Stand
AS ONE Corporation
• Model number: PM-002
• 2 racks
• Rotation speed: 40 - 280rpm
• Size: 661 x 290 x 240mm
• Weight: Approx 20kg
• Roller: f38 x 510mm (effective length/500 mm)
• Applicable pot mill Size/f90 - 180mm, Weight/20kg
• Timer settings: 0 - 9 hours 59 minutes (1 minutes units)
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (with 3P plug earth, 2P - 3P conversion adapter)
• Rotation speed can be adjusted to achieve grinding in accordance with sample.
• Distance between the rollers can be adjusted according to the pot mill.
$0
Portable Desiccator 302 x 318 x 420mm
AS ONE Corporation
• Material: Body/strengthened glass, Frame/aluminum, Corner joint/ABS resin
• Shelf board load capacity: Approx 5kg
• Weight: Approx 6kg
• Accessories: Shelf board (SUS430) x 1, silica gel plate (polystyrene)
• Outer dimensions: 302 x 318 x 420mm
• Inner dimension: 272 x 260 x 370mm
• Shelf board dimensions: 268 x 256mm
• Model number: PHG
• Door is equipped with snap lock.
• Suitable for storing hot samples.
$0
Portable Desiccator 400 x 318 x 332mm
AS ONE Corporation
• Material: Body/strengthened glass, Frame/aluminum, Corner joint/ABS resin
• Shelf board load capacity: Approx 5kg
• Weight: Approx 6kg
• Accessories: Shelf board (SUS430) x 1, silica gel plate (polystyrene)
• Outer dimensions: 400 x 318 x 332mm
• Inner dimension: 370 x 260 x 272mm
• Shelf board dimensions: 366 x 256mm
• Model number: PLG
• Door is equipped with snap lock.
• Suitable for storing hot samples.
$0
Auto Lab Jack
AS ONE Corporation
• Outer dimensions: 230 x 272 x 240mm
• Motor: AC induction motor 3W
• Power supply: AC100V 50/60Hz 1A
• Power cord length: 2.5m
• Stage material: Stainless steel (SUS304)
• Weight: 5.5kg
• Model number: LJS-100
• Stage size (mm): 200 x 200
• Maximum load (kg): 10
• Expansion range (mm): 115 - 240
• Both stage size and load capacity are large.
• Turning ON and OFF moves stage up and down smoothly.
• Stage automatically stops when it reaches upper or lower limit.
• Optional remote switch allows external operation, installed with connector.
$0
Remote Switch for Automatic Lab Jack
AS ONE Corporation
• Cord length: 2m
• Model number: LJS-RSW
• Remote switch
• Both stage size and load capacity are large.
• Turning ON and OFF moves stage up and down smoothly.
• Stage automatically stops when it reaches upper or lower limit.
• Optional remote switch allows external operation, installed with connector.
$0
Microsyringe Pump
AS ONE Corporation
• Model number: MSPE-1
• Size: 235 x 95 x 85mm
• Mounting syringe number: 1 piece
• Flow rate setting: 0.1 - 100?L/min (1.0mL when using syringe), 16 stages
• Feed speed range: 0.006 - 6mm/min
• Material: Exterior/acrylic denatured high impact PVC (vinyl chloride resin)
• Power supply: 100VAC 50/60Hz
• Used motor: Small stepping motor
• Applicable syringe capacity: 10?L - 10mL
• Weight: 900g
• With injection movement pause function
• *Syringe is not included in the package. *Syringe capacity scale is set for 60mm with feed speed scale, So you need to do scale conversion with other syringes.
• Flowrate setting is easy with dial.
$0
Microsyringe Pump
AS ONE Corporation
• Model number: MSPE-3
• Size: 235 x 116 x 85mm
• Mounting syringe number: 3 pieces
• Flow rate setting: 0.1 - 100?L/min (1.0mL when using syringe), 16 stages
• Feed speed range: 0.006 - 6mm/min
• Material: Exterior/acrylic denatured high impact PVC (vinyl chloride resin)
• Power supply: 100VAC 50/60Hz
• Used motor: Small stepping motor
• Applicable syringe capacity: 10?L - 10mL
• Weight: 975g
• With injection movement pause function
• *Syringe is not included in the package. *Syringe capacity scale is set for 60mm with feed speed scale, So you need to do scale conversion with other syringes.
• Flowrate setting is easy with dial.
$0
AS FLON(R) PTFE Spatula Semicircles Type Small
AS ONE Corporation
• material: PTFE (ethylene tetrafluoride)
• Shape: Semi-half
• spatula width x spatula height (mm): 75 x 45
• Total length (mm): 160
• Model number: H small
• End of spatula is tapered.
$0
AS FLON(R) PTFE Spatula Semicircles Type During
AS ONE Corporation
• material: PTFE (ethylene tetrafluoride)
• Shape: Semi-half
• spatula width x spatula height (mm): 100 x 55
• Total length (mm): 180
• Model number: H
• End of spatula is tapered.
$0
AS FLON(R) PTFE Spatula Semicircles Type Large
AS ONE Corporation
• material: PTFE (ethylene tetrafluoride)
• Shape: Semi-half
• spatula width x spatula height (mm): 125 x 70
• Total length (mm): 200
• Model number: H large
• End of spatula is tapered.
$0
AS FLON(R) PTFE Spatula Semicircles Type Extra-Large
AS ONE Corporation
• material: PTFE (ethylene tetrafluoride)
• Shape: Semi-half
• spatula width x spatula height (mm): 150 x 85
• Total length (mm): 200
• Model number: H special large
• End of spatula is tapered.
$0
Syringe Pump Economy
AS ONE Corporation
• Model number: SPE-1
• Inhalation, injection type: Injection
• Applicable syringe capacity: 10 - 50mL
• Size: 235 x 105 x 95mm
• Feed speed range: 0.006 - 6mm/min
• Flow rate: 0.07mL/h (10mL syringe) - 240mL/h (50mL syringe)
• Material: Exterior/acrylic denatured high impact PVC (vinyl chloride resin)
• Flow rate setting: Dial setting, 16 stages
• Power supply: 100VAC 50/60Hz
• Used motor: Small stepping motor
• With injection movement pause function
• Weight: 970g
• Accessories: Flow rate setting software
• *Syringe is not included in the package. *Whole discharge may be unable due to shape of syringe.
• Flowrate setting is easy with dial.
• Conversion software for flow rate setting graduation table is attached.
$0
Constant-Low-Temperature Water Circulator (Peltier Type) 1.5L
AS ONE Corporation
• temperature settings range: 4 to 65 ? C
• Size: 305 x 280 x 235 mm
• tank inner size (Top): 160 x 170 x 70 mm
• Minimum set temperature unit: 0.1 ? C
• Temperature adjustment accuracy: ? 1.0 ? C
• Temperature control method: PID control and digital display
• Heat cooling system: heating and cooling by Peltier element
• Circulation Method: Agitation by electromagnetic pumps
• Safety device: Overcurrent fuse
• capacity: about 1.5 L
• material: water tank / stainless steel (SUS304), main body / steel powder coating
• power supply: AC100V, 50 / 60Hz, 1.1 A
• power cord: 2 m (3P Plug)
• Weight: 9 kg
• * If R.T. 25 ? C is set at 5 ? C or below, it is recommended that the R.T. be below 20 ? C
• Model Number: CTB-1
• Electronic cooling method adopting peltier elements realizes clean cooling and heating.
• Delicate temperature control is enabled for both heating and cooling.
$0
Constant-Low-Temperature Water Circulator (Peltier Type) 3.0L
AS ONE Corporation
• temperature settings range: 4 to 65 ? C
• Size: 435 x 280 x 235 mm
• tank inner size (Top): 230 x 150 x 80 mm
• Minimum set temperature unit: 0.1 ? C
• Temperature adjustment accuracy: ? 1.0 ? C
• Temperature control method: PID control and digital display
• Heat cooling system: heating and cooling by Peltier element
• Circulation Method: Agitation by electromagnetic pumps
• Safety device: Overcurrent fuse
• capacity: about 3.0 L
• material: water tank / stainless steel (SUS304), main body / steel powder coating
• power supply: AC100V, 50 / 60Hz, 2.1 A
• power cord: 2 m (3P Plug)
• Weight: 13 kg
• * If R.T. 25 ? C is set at 5 ? C or below, it is recommended that the R.T. be below 20 ? C
• Model Number: CTB-2
• Electronic cooling method adopting peltier elements realizes clean cooling and heating.
• Delicate temperature control is enabled for both heating and cooling.
$0
Inclined Stand for Bottle with Flat Stopcock Bottle To Hold: 10L x 2
AS ONE Corporation
• Model number: 10WHS
• Size (mm): 342 x 413 x 920
• Bottle to hold: 10L x 2 pieces
• Bottle fixing frame size (mm): 148 x 386
• Material: Stainless steel (SUS304)
• Caster: f50mm (with diagonal stoppers)
• Top plate height: Front height 650mm
• *Bottles with cock are not included.
• Tilted structure offers 1/4 or less residual liquid, rather than horizontal placement.
$0
Inclined Stand for Bottle with Flat Stopcock Bottle To Hold: 10L x 3
AS ONE Corporation
• Model number: 10THS
• Size (mm): 498 x 413 x 920
• Bottle to hold: 10L x 3 pieces
• Bottle fixing frame size (mm): 148 x 386
• Material: Stainless steel (SUS304)
• Caster: f50mm (with diagonal stoppers)
• Top plate height: Front height 650mm
• *Bottles with cock are not included.
• Tilted structure offers 1/4 or less residual liquid, rather than horizontal placement.
$0
Inclined Stand for Bottle with Flat Stopcock Bottle To Hold: 20L x 2
AS ONE Corporation
• Model number: 20WHS
• Size (mm): 426 x 443 x 960
• Bottle to hold: 20L x 2 pieces
• Bottle fixing frame size (mm): 190 x 416
• Material: Stainless steel (SUS304)
• Caster: f50mm (with diagonal stoppers)
• Top plate height: Front height 650mm
• *Bottles with cock are not included.
• Tilted structure offers 1/4 or less residual liquid, rather than horizontal placement.
$0
Inclined Stand for Bottle with Flat Stopcock Bottle To Hold: 20L x 3
AS ONE Corporation
• Model number: 20THS
• Size (mm): 624 x 443 x 960
• Bottle to hold: 29L x 3
• Bottle fixing frame size (mm): 190 x 416
• Material: Stainless steel (SUS304)
• Caster: f50mm (with diagonal stoppers)
• Top plate height: Front height 650mm
• *Bottles with cock are not included.
• Tilted structure offers 1/4 or less residual liquid, rather than horizontal placement.
$0