AS ONE Corporation

• Material: Body, inclined holder/stainless steel (SUS304), Knob/ABS resin, Window/glass
• Horizontal sliding door high type
• Outer dimension (mm): 1000 x 300 x 1600
• Plain shelf horizontal sliding door
• Number of shelf boards: 6 stages x 2
• Weight: 60kg
• Accessories: Left and right connection metal fitting x 1 piece, Floor, wall fixed fittings x 4 pieces, Up or down connection metal fitting x 2 pieces (height 800mm)
• Model number: SC-100FHH

• Material: Body, inclined holder/stainless steel (SUS304), Knob/ABS resin, Window/glass
• Horizontal sliding door glass window
• Outer dimension (mm): 1000 x 300 x 800
• Plain shelf horizontal sliding door
• Number of shelf boards: 3 stages x 2
• Weight: 30kg
• Accessories: Left and right connection metal fitting x 1 piece, Floor, wall fixed fittings x 4 pieces, Up or down connection metal fitting x 2 pieces (height 800mm)
• Model number: SC-100FHG

• Material: Body, inclined holder/stainless steel (SUS304), Knob/ABS resin, Window/glass
• Horizontal sliding door glass window high type
• Outer dimension (mm): 1000 x 300 x 1600
• Plain shelf horizontal sliding door
• Number of shelf boards: 6 stages x 2
• Weight: 58kg
• Accessories: Left and right connection metal fitting x 1 piece, Floor, wall fixed fittings x 4 pieces, Up or down connection metal fitting x 2 pieces (height 800mm)
• Model number: SC-100FHGH

• Material: Stainless steel (SUS304), Knob/ABS resin
• Single door
• Outer dimension (mm): 500 x 300 x 800
• Plain shelf single door
• Number of shelf boards: 3 shelves
• Weight: 15kg
• Accessories: Left and right connection metal fitting x 1 piece, Floor, wall fixed fittings x 4 pieces, Up or down connection metal fitting x 2 pieces (height 800mm)
• Model number: SC-50FD

• Material: Stainless steel (SUS304), Knob/ABS resin
• Single door high type
• Outer dimension (mm): 500 x 300 x 1600
• Plain shelf single door
• Number of shelf boards: 6 stage rack
• Weight: 30kg
• Accessories: Left and right connection metal fitting x 1 piece, Floor, wall fixed fittings x 4 pieces, Up or down connection metal fitting x 2 pieces (height 800mm)
• Model number: SC-50FDH

• Measurement range: Temperature/-40 - 80?, Humidity/0% - 90%RH
• Measurement accuracy: Temperature/?0.3? (-10 - 50?), Humidity/?5%RH
• Resolution: Temperature/0.1?, Humidity/0.1%
• Sensor: Capacitance type
• Measurement interval: Setting available from 1 - 255 minutes per 1 minute unit
• Interface: Wireless communication by FeLica communication standards
• Memory capacity: 16000 data
• Waterproof performance: Watertight (IP67)
• Power supply: CR2477 lithium battery x 1 piece (test included), Battery life: Approximately 1 year
• Weight: Approx 70g
• Size (mm): 90 x 15 x 55
• *Downloading NFC control application is required (android 4.03 or later). *Reader and PC are required for setting.
• Model number: AS-215LFA
• This product can be attached to equipment such as desiccator, and you can retrieve data without opening door.
• Data can be read out by NFC enabled smart phone or NFC communication reader(RC-S380/S).
• Large liquid crystal display makes it easy to manage temperature inside.
• Possible to attached to inside of window by usingoptional holder.

• Holder for window
• Material: Body/PVC (vinyl chloride resin)
• Fixing method: Adhesive sheet mounting
• Size (mm): 92.0 x 16.4 x 66.5
• *Downloading NFC control application is required (android 4.03 or later). *Reader and PC are required for setting.
• Model number: Holder for window
• This product can be attached to equipment such as desiccator, and you can retrieve data without opening door.
• Data can be read out by NFC enabled smart phone or NFC communication reader(RC-S380/S).
• Large liquid crystal display makes it easy to manage temperature inside.
• Possible to attached to inside of window by usingoptional holder.

• Material: PS (polystyrene)
• Electron beam sterilization
• Diameter x height (mm): f90 x 15
• Quantity: 1 box (10 sheets/bag x 50 bags)
• Electron beam sterilization
• *Samples -01 are available.
• Model number: ND90-15
• It has rib on outer circumference, so it is difficult to collapse even if stacked.
• Excellent transparency and easy colony check
• Because it is structured to prevent sticking of lid and body, it does not impair breathability.
• It has 4-dividing-points on bottom so it is convenient for colony observation.

• Material: Body/SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 160 x 160mm
• Rotation speed: 60 - 1350rpm
• Motor: 3W
• Stirred capacity: 10L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 20W
• Main unit size *: 160 x 160 (171) x 111mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 2.2kg
• Phenol Resin top plate
• *Demonstration equipment is available (only 3-1492-01).
• Model number: VPS-160B
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.

• Material: Body/SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 200 x 200mm
• Rotation speed: 60 - 1350rpm
• Motor: 15W
• Stirred capacity: 20L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 40W
• Main unit size *: 200 x 200 (211) x 130mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 3.9kg
• Phenol Resin top plate
• *Demonstration equipment is available (only 3-1492-01).
• Model number: VPS-200B
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.

• Material: Body/SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 300 x 300mm
• Rotation speed: 60 - 1350rpm
• Motor: 40W
• Stirred capacity: 70L
• Magnet/strength (T): Neodymium/0.46
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 70W
• Main unit size *: 300 x 300 (310) x 165mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 8.8kg
• Phenol Resin top plate
• *Demonstration equipment is available (only 3-1492-01).
• Model number: VPS-300B
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.

• Material: Body/SPCC (acrylic coating), Top board/stainless steel (SUS304)
• Motor: Induction motor
• Top board material: Stainless steel (SUS304)
• Top board size: 160 x 160mm
• Rotation speed: 60 - 1350rpm
• Motor: 3W
• Stirred capacity: 10L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 20W
• Main unit size *: 160 x 160 (171) x 111mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 2.3kg
• Stainless steel top plate
• Model number: VPS-160S
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.

• Material: Body/SPCC (acrylic coating), Top board/stainless steel (SUS304)
• Motor: Induction motor
• Top board material: Stainless steel (SUS304)
• Top board size: 200 x 200mm
• Rotation speed: 60 - 1350rpm
• Motor: 15W
• Stirred capacity: 20L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 40W
• Main unit size *: 200 x 200 (211) x 130mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 4.1kg
• Stainless steel top plate
• Model number: VPS-200S
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.

• Material: Body/SPCC (acrylic coating), Top board/stainless steel (SUS304)
• Motor: Induction motor
• Top board material: Stainless steel (SUS304)
• Top board size: 300 x 300mm
• Rotation speed: 60 - 1350rpm
• Motor: 40W
• Stirred capacity: 70L
• Magnet/strength (T): Neodymium/0.46
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 70W
• Main unit size *: 300 x 300 (310) x 165mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 9.7kg
• Stainless steel top plate
• Model number: VPS-300S
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.

• Material: Body/SPCC (acrylic coating), Top board/aluminum (anodic oxide processing)
• Top board temperature range: Room temperature +5 - 300?
• Motor: Induction motor
• Temperature control system: PID control
• Timer setting range: 0 - 99 hours 59 minutes (with equipment stop function)
• Temperature display precision: +/- 2?
• Heater: Sheathed heater
• Safety device: Temperature excessive rise prevention device, overcurrent protection fuse
• Top board material: Aluminum (anodic oxide processing)
• Top board size: 190 x 190mm
• Rotation speed: 60 - 1350rpm
• Motor: 6W
• Stirred capacity: 10L
• Magnet/strength (T): Samarium-cobalt/0.37
• Heater capacity: 1000W
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 1050W
• Main unit size *: 193 x 193 (225) x 177mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 6.3kg
• Aluminum top board
• *Demonstration equipment is available (only 3-1494-01).
• Model number: VPHS-190A

• Material: Body/SPCC (acrylic coating), Top board/aluminum (anodic oxide processing)
• Top board temperature range: Room temperature +5 - 300?
• Motor: Induction motor
• Temperature control system: PID control
• Timer setting range: 0 - 99 hours 59 minutes (with equipment stop function)
• Temperature display precision: +/- 2?
• Heater: Sheathed heater
• Safety device: Temperature excessive rise prevention device, overcurrent protection fuse
• Top board material: Aluminum (anodic oxide processing)
• Top board size: 230 x 230mm
• Rotation speed: 60 - 1350rpm
• Motor: 25W
• Stirred capacity: 20L
• Magnet/strength (T): Samarium-cobalt/0.37
• Heater capacity: 1300W
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 1350W
• Main unit size *: 233 x 233 (265) x 179mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 9.9kg
• Aluminum top board
• *Demonstration equipment is available (only 3-1494-01).
• Model number: VPHS-230A

• main body material: stainless steel (SUS304 430) and others
• Magnet: Samakova magnet
• Recommended agitator size: 25 ? f8 mm, 30 ? f8 mm
• Leg 4 pieces Standard Dimensions: f 128 mm
• Environmental resistance: In water and oil
• Available temperature range: 5 to 200 ? C
• Weight: 0.2 kg
• Accessory: Hex wrench
• duckboard Dimensions (mm): 160 x 46.5
• The foot of pitch Dimensions (mm): f 102 to f 154
• * It is also possible to combine the bus stirrer and the duckboard (Please be careful of combinations.)
• * The adaptive bus star is water tank inner diameter f 180 mm or more
• * Recommended water bus stirrer (2-7940-31), oil bus stirrer (2-7939-21)
• model number: agitation duckboard

• Material: Body/stainless steel (SUS304) (ceramic coat), Rail/steel (fluorine coat)
• Size (mm): 455 x 600 x 800
• Ceramic coat
• Amount of storage of reagent bottle: Only 500mL/45 volumes, Only 1L/24 volumes
• Drawer withstand load: 20kg
• Body weight: Approx 35kg
• Accessories: Tray x 9 pieces (PP), Height partition rod x 8 volumes, Horizontal partition plate x 24 pieces, Floor fixed fittings, up or down connection metal fitting x 4 pieces each
• Unified size in common features safety cabinet series, Using connection metal fitting for connection is a straightforward process.
• Can be installed exhaust duct (1-7612-01) of f100mm to the ceiling. Use an optional base to efficiently carry out the exhaust.
• Model number: SM-3E
• Ceramic coating is applied to entire body of stainless steel chemical storage cabinet to enhance chemical resistance.
• Fluorine coating is applied to sliding part of rails to reduce sticking of drawers due to corrosion.
• Total lock type is equipped with safety function which locks other drawers when one drawer is opened.
• For separate lock type, possible to lock each drawer individually, therefore it is possible to store and manage chemicals in each drawer separately.

• Model number: SM-3E1N
• Specification: Separate lock
• Size (mm): 486 x 600 x 800
• Material: Body/stainless steel (SUS304) (ceramic coat), Rail/steel (fluorine coat)
• Common features: Unified size in safety cabinet series, Using connection metal fitting for connection is a straightforward process. You can install f100mm exhaust duct to the ceiling. Use an optional base to efficiently carry out the exhaust.
• Amount of storage of reagent bottle: Only 500mL/45 volumes, Only 1L/24 volumes
• Drawer withstand load: 20kg
• Body weight: Approx 35kg
• Accessories: Tray x 9 pieces (PP)
• Accessories: Height partition rod x 8 volumes, Horizontal partition plate x 24 pieces
• Accessories: Floor fixed fittings, up or down connection metal fitting x 4 pieces each
• *Up or down connection of separate lock and total lock is not possible. (left and right connection is available).
• Ceramic coating is applied to entire body of stainless steel chemical storage cabinet to enhance chemical resistance.
• Fluorine coating is applied to sliding part of rails to reduce sticking of drawers due to corrosion.
• Total lock type is equipped with safety function which locks other drawers when one drawer is opened.
• For separate lock type, possible to lock each drawer individually, therefore it is possible to store and manage chemicals in each drawer separately.

• Material: Body/stainless steel (SUS304) (ceramic coat), Rail/steel (fluorine coat)
• Size (mm): 455 x 600 x 800
• Ceramic coat
• Amount of storage of reagent bottle: 12 volumes (gallon bottle)
• Drawer withstand load: 30kg
• Body weight: Approx 30kg
• Accessories: Partition plate x 6 sheets, Height partition rod x 8 volumes, Floor fixed fittings, up or down connection metal fitting x 4 pieces each
• *GM-3E cannot be used in the upper row. Ceramic coat to safety cabinet series will also be taken care of, Please contact with us. Safety cabinet for option is available.
• Unified size in common features safety cabinet series, Using connection metal fitting for connection is a straightforward process.
• Can be installed exhaust duct (1-7612-01) of f100mm to the ceiling. Use an optional base to efficiently carry out the exhaust.
• Model number: GM-3E
• Ceramic coating is applied to entire body of stainless steel chemical storage cabinet to enhance chemical resistance.
• Fluorine coating is applied to sliding part of rails to reduce sticking of drawers due to corrosion.
• Total lock type is equipped with safety function which locks other drawers when one drawer is opened.
• For separate lock type, possible to lock each drawer individually, therefore it is possible to store and manage chemicals in each drawer separately.