AS ONE Corporation
SANIFOODS HACCP Hand Brush S Hard Blue
AS ONE Corporation
• Hand brush S hard
• Color: Blue
• Size (mm): 45 x 120 x 20
• Material: Body/PP (polypropylene), Hair/polyester
• Allowable temperature limit: 120?
• HACCP correspondence
• Adopted soft fiber cleans skin well without scratching.
• Excellent durability and heat resistance prevent contamination and fungal reproduction.
• Special bristle material in triangle pole shape is used, enabling brush trace.
$0
Disposable NMR Sample Tube for F5mm
AS ONE Corporation
• Model number: AS1NMR
• Specification: for f5mm
• Quantity: 1 box (100 pieces)
• Material: DUROBAX(R) ASTM Type1 ClassB
• Length: 180mm
• Straightness: 30?m
• Size: Outer diameter/4.95 ?0.05mm, Inner diameter/4.10 ?0.10mm
• With poly cap
• These disposable tubes lower risk of sample contamination, and reduce work load as they do not need to be washed after use.
$0
Stainless Steel Bogie
AS ONE Corporation
• Model number: MK-602
• Size (mm): 600 x 450 x 850
• Weight (kg): Approx 12
• Material: Stainless steel (SUS304)
• Caster: f75mm made of urethane, front wheel swivel, rear wheel fixed (with stopper)
• Corner bumper: Elastomer (gray)
• Loading platform height: 130mm
• Withstand load: 200kg
• Handle fixed type
$0
Stainless Steel Bogie
AS ONE Corporation
• Model number: MK-902
• Size (mm): 900 x 600 x 850
• Weight (kg): About 19
• Material: Stainless steel (SUS304)
• Caster: f75mm made of urethane, front wheel swivel, rear wheel fixed (with stopper)
• Corner bumper: Elastomer (gray)
• Loading platform height: 130mm
• Withstand load: 200kg
• Handle fixed type
$0
Stainless Steel Bogie
AS ONE Corporation
• Model number: MK-1202
• Size (mm): 1200 x 750 x 850
• Weight (kg): About 26
• Material: Stainless steel (SUS304)
• Caster: f75mm made of urethane, front wheel swivel, rear wheel fixed (with stopper)
• Corner bumper: Elastomer (gray)
• Loading platform height: 130mm
• Withstand load: 200kg
• Handle fixed type
$0
Radiation Thermometer Tn43cj0
AS ONE Corporation
• Model number: TN43CJ0
$0
Radiation Thermometer
AS ONE Corporation
• Model number: TN418JCR
• In combination with K thermocouple(sold separately), this product can also be used as digital thermometer.
• Thermometer is equipped with alarm which sounds if set temperature is exceeded.
• Thermometer also includes humidity sensor which allows you to measure relative humidity, dew point, dry-bulb temperature, and wet-bulb temperature.
$0
Double-Sided Glove Box 1225 x 758 x 62mm
AS ONE Corporation
• Model number: DGB-1000
• Size (mm): 1225 x 758 x 62
• Usage: Gas replacement 3
• Material: Body/stainless steel (SUS304), Window/PMMA (acrylic) plate thickness 5mm, Pass box/PMMA (acrylic) Plate thickness: 10mm, Cock mounting portion for Gas replacement/PC (polycarbonate)
• Gloves holder: 2 pieces each side (total 4 pieces), Outer diameter 140mm
• Pass box: Inner size: 230 x 250 x 230mm
• Internal outlet: AC 100V 2P x 3 ports x 1 piece
• Lighting: Fluorescent lamps 15W x 1 lamp 2 volumes
• Outlet and Lighting switch: 1 piece on each side
• Gas replacement cock: 2 pieces each in the Body and Pass box (for supply/exhaust: for Outer diameter f10mm tube)
• Weight: 41.5kg
• Positive pressure safety valve: 1 piece
• Power supply: AC100V 50/60Hz 15A
• Power cord length: 2.8m (2P plug)
• Accessories: Large gloves for Glove box x 2 pair, Spring x 4 pieces
• Suitable for experiment with promptness required and complicated experiment, as face-to-face work is available from both sides.
• Gas substitution is individually possible in body and pass box.
• Inside of body is equipped with AC100V2P electric socket and 2 fluorescent lights.
$0
Gap Wagon 750 x 250 x 800mm
AS ONE Corporation
• Material: Stainless steel (*stainless steel material that is magnetic and has characteristics equivalent to SUS304. )
• Caster: f50mm made of rubber (with diagonal stopper)
• Withstand load: Approximately 20kg/shelf
• Shelf spacing: 320mm
• Foot pipe diameter: f25mm
• Size (mm): 750 x 250 x 800
• Weight (kg): 8
• Model number: B
• Space, which can not be used before, is usable by these products.
• Excellent in durability, chemical and corrosion resistance.
$0
Gap Wagon 750 x 300 x 800mm
AS ONE Corporation
• Material: Stainless steel (*stainless steel material that is magnetic and has characteristics equivalent to SUS304. )
• Caster: f50mm made of rubber (with diagonal stopper)
• Withstand load: Approximately 20kg/shelf
• Shelf spacing: 320mm
• Foot pipe diameter: f25mm
• Size (mm): 750 x 300 x 800
• Weight (kg): 9
• Model number: C
• Space, which can not be used before, is usable by these products.
• Excellent in durability, chemical and corrosion resistance.
$0
Pipet Rack Half Wave Type Mini
AS ONE Corporation
• Material: Stainless steel (SUS304)
• Model number: Wave type mini
• Size (mm): 100 x 120 x 50
• Multiplied number: 3
• It can be stored in drawer of pipet(P.898) directly, because wave type mini is half size(except pipet 4).
$0
Simple Type Pipet Rack
AS ONE Corporation
• Material: PVC (vinyl chloride resin)
• Model number: MP
• Size (mm): 145 x 120 x 50
• Multiplied number: 5
• Suitable for temporary storage of pipette, glass rod and thermometer.
• Convenient for personal use.
$0
Equipment Monitor Stand 638 x 650 x 1142mm
AS ONE Corporation
• Material: Base, shelf board/steel, Strut/aluminum, Slide table/melamine decorative plywood (soft edge finish), Inner wall/PVC (vinyl chloride resin)
• Shelf load capacity: Uppermost or lowermost shelf/35kg/shelf 1 sheet, Middle/25 kg/shelf 1 sheet, Storage type table/5kg
• Shelf board dimensions: 550 x 550mm
• Mini table size: 450 x 295mm
• Middle shelf moving interval: At 50mm intervals 4 stages up or down
• Caster: f100mm urethane roll (with stopper x 2 pieces)
• OA tap: 4 strand tap (3P), Cord length/3m
• Weight: 30.5kg
• Model number: ML-1
• Size (mm): 638 x 650 x 1142
• Number of shelf boards: 3 shelves
• Middle shelf board can adjust 4 steps up and down at intervals of 50*mm*, and can change shelf board depending on the size of loading device.
• Mini table of slide system is convenient.
• OA tap is equipped.
$0
Equipment Monitor Stand 638 x 650 x 1442mm
AS ONE Corporation
• Material: Base, shelf board/steel, Strut/aluminum, Slide table/melamine decorative plywood (soft edge finish), Inner wall/PVC (vinyl chloride resin)
• Shelf load capacity: Uppermost or lowermost shelf/35kg/shelf 1 sheet, Middle/25 kg/shelf 1 sheet, Storage type table/5kg
• Shelf board dimensions: 550 x 550mm
• Mini table size: 450 x 295mm
• Middle shelf moving interval: At 50mm intervals 4 stages up or down
• Caster: f100mm urethane roll (with stopper x 2 pieces)
• OA tap: 4 strand tap (3P), Cord length/3m
• Weight: 36kg
• Model number: ML-2
• Size (mm): 638 x 650 x 1442
• Number of shelf boards: 4 shelves
• Middle shelf board can adjust 4 steps up and down at intervals of 50*mm*, and can change shelf board depending on the size of loading device.
• Mini table of slide system is convenient.
• OA tap is equipped.
$0
Portable Fume Hood Flat Hood
AS ONE Corporation
• Material: Stainless steel (SUS304)
• Top plate even withstand load: 20kg
• Punching hole: f5mm
• Weight: 8kg
• Duct connection section: f75mm
• Model number: Flat hood 450
• Main unit size (mm): 450 x 600 x 100
$0
Portable Fume Hood Flat Hood
AS ONE Corporation
• Material: Stainless steel (SUS304)
• Top plate even withstand load: 20kg
• Punching hole: f5mm
• Weight: 10kg
• Duct connection section: f75mm
• Model number: Flat hood 600
• Main unit size (mm): 600 x 600 x 100
$0
New Lab Bench Withstand Load Type ALH900 x 600 x 800mm
AS ONE Corporation
• Model number: ALH
• Type: Load tolerance specification
• Material: top board / plywood Soft Edge Finish (surface antibacterial decorative plate), strut / Melamine with 25 mm angle steel
• Size (mm): 900 x 600 x 800
• top board Load tolerance: Approximately 50 kg
• Shelf interval : 585 mm
• Casters: f 65 mm urethane (Stoppers with 2 pieces)
• Weight: 21 kg
• Soft edge, made of soft PVC(polyvinyl chloride) has been processed on top plate.
• AW?BW type come with convenient auxiliary stand and it enhnces further workability.
•
• Top plate withstand load(average lod) is 50*kg* and can be plced hevy load.
$0
New Lab Bench Withstand Load Type BLH900 x 450 x 800mm
AS ONE Corporation
• Model number: BLH
• Type: Load tolerance specification
• Material: top board / plywood Soft Edge Finish (surface antibacterial decorative plate), strut / Melamine with 25 mm angle steel
• Size (mm): 900 x 450 x 800
• top board Load tolerance: Approximately 50 kg
• Shelf interval : 585 mm
• Casters: f 65 mm urethane (Stoppers with 2 pieces)
• Weight: 17 kg
• Soft edge, made of soft PVC(polyvinyl chloride) has been processed on top plate.
• AW?BW type come with convenient auxiliary stand and it enhnces further workability.
•
• Top plate withstand load(average lod) is 50*kg* and can be plced hevy load.
$0
New Lab Bench (Assembled) Load Tolerance Type
AS ONE Corporation
• Type: Load tolerance type
• Top board: strut/plywood Soft Edge Finish (surface antibacterial decorative board) material/Melamine Burned 25 mm Square Steel
• Size (mm): 600 x 900 x 800
• Top board Load tolerance : about 50 kg (equal load)
• Shelf interval : 585mm
• Casters: f65 made of mm urethane (with stopper, 2 pieces)
• Weight: 21 kg
$0
New Lab Bench (Assembled) Load Tolerance Type
AS ONE Corporation
• Type: Load tolerance type
• Top board: strut/plywood Soft Edge Finish (surface antibacterial decorative board) material/Melamine Burned 25 mm Square Steel
• Size (mm): 450 x 900 x 800
• Top board Load tolerance : about 50 kg (equal load)
• Shelf interval : 585mm
• Casters: f65 made of mm urethane (with stopper, 2 pieces)
• Weight: 17 kg
$0