AS ONE Corporation

• Model number: LJH-180
• Size (mm): 200 x 200 x 61
• Supported top board (mm): 180 x 180
• Quantity: 1 expression (Body + Fixture)
• main body material: stainless steel (SUS304)
• Main accessories: L shaped metal bracket x 4 pieces, Knurling 5 pieces, spring (S 160 x 2 pieces)
• * Please note that this product has a spring structure with compression due to pressurization
• * It can be attached to a flat plate top board lab jack.
• Possible to customized with 4 types of spring length(optional).
• Mounting location of spring can be changed, preventing beakers and Erlenmeyer flasks on jack from falling.
• Several holes of L-shaped mounting fixture allows you to change mounting location of spring to make fine adjustment of spring force.
• Adding optional spring enables product to be used for various purposes such as fixing of round-bottom flasks and ensuring of stronger fixing.

• Model number: LJH-200
• Size (mm): 220 x 220 x 61
• Supported top board (mm): 200 x 200
• Quantity: 1 expression (Body + Fixture)
• main body material: stainless steel (SUS304)
• Main accessories: L shaped metal bracket x 4 pieces, Knurling 5 pieces, spring (S 180 x 2 pieces)
• * Please note that this product has a spring structure with compression due to pressurization
• * It can be attached to a flat plate top board lab jack.
• Possible to customized with 4 types of spring length(optional).
• Mounting location of spring can be changed, preventing beakers and Erlenmeyer flasks on jack from falling.
• Several holes of L-shaped mounting fixture allows you to change mounting location of spring to make fine adjustment of spring force.
• Adding optional spring enables product to be used for various purposes such as fixing of round-bottom flasks and ensuring of stronger fixing.

• Model number: L-shaped metal bracket set
• Possible to customized with 4 types of spring length(optional).
• Mounting location of spring can be changed, preventing beakers and Erlenmeyer flasks on jack from falling.
• Several holes of L-shaped mounting fixture allows you to change mounting location of spring to make fine adjustment of spring force.
• Adding optional spring enables product to be used for various purposes such as fixing of round-bottom flasks and ensuring of stronger fixing.

• Model number: S 110
• Possible to customized with 4 types of spring length(optional).
• Mounting location of spring can be changed, preventing beakers and Erlenmeyer flasks on jack from falling.
• Several holes of L-shaped mounting fixture allows you to change mounting location of spring to make fine adjustment of spring force.
• Adding optional spring enables product to be used for various purposes such as fixing of round-bottom flasks and ensuring of stronger fixing.

• Model number: S 130
• Possible to customized with 4 types of spring length(optional).
• Mounting location of spring can be changed, preventing beakers and Erlenmeyer flasks on jack from falling.
• Several holes of L-shaped mounting fixture allows you to change mounting location of spring to make fine adjustment of spring force.
• Adding optional spring enables product to be used for various purposes such as fixing of round-bottom flasks and ensuring of stronger fixing.

• Model number: S 160
• Possible to customized with 4 types of spring length(optional).
• Mounting location of spring can be changed, preventing beakers and Erlenmeyer flasks on jack from falling.
• Several holes of L-shaped mounting fixture allows you to change mounting location of spring to make fine adjustment of spring force.
• Adding optional spring enables product to be used for various purposes such as fixing of round-bottom flasks and ensuring of stronger fixing.

• Model number: S 180
• Possible to customized with 4 types of spring length(optional).
• Mounting location of spring can be changed, preventing beakers and Erlenmeyer flasks on jack from falling.
• Several holes of L-shaped mounting fixture allows you to change mounting location of spring to make fine adjustment of spring force.
• Adding optional spring enables product to be used for various purposes such as fixing of round-bottom flasks and ensuring of stronger fixing.

• Model number: NHA-3030
• Highest temperature (?): 350
• Plate size (mm): 300 x 300
• Plate material: Aluminum
• Control system: PID control
• Temperature distribution width: 6? (at 300?)
• Main unit size: 350 x 350 x 135mm
• Heater capacity: 1400W
• Power supply: 100VAC 50/60Hz 15A (2P plug)
• Withstand load: 10kg
• Weight: Approx 7kg
• Compared with general hot plate, max. temperature 350? and gives room for margin.
• With compact body, there is flexibility in handling.

• Model number: TXN800W
• Specification: 130 x 160 x 84mm
• Power supply: 100VAC 50/60Hz
• Connection capacity: AC100V MAX 15A (including output for alert)
• Temperature control system: PID control (with auto-tuning)
• Output control system: Voltage output by SSR
• Safety mechanism Double component of SSR and relay, 15A fuse
• Power cord: About 1.8m (3P plug)
• Weight: Approx 1.5kg
• Temperature display precision: +/-2? or instruction value +/- (0.3% + 1 digit), whichever is larger
• Sensor type: K class thermocouple
• Setting temperature: -100 to +1000?
• Setting system: UP/DOWN key
• Timer type: Autostart, auto-stop, SV start
• Timer setting available time: 1 - 99 hours 59 minutes
• Connection terminal: Control output/3P outlet, Alarm Output, sensor input /M3.5Y terminal block
• Accessories: Sheath type K thermocouple sensor (0 - 750?)
• *As included K class thermocouple sensor is the type of standard, Please prepare sensor capable for higher temperature separately.
• This is standard temperature controller equipped with alarm output terminal.
• 100V/1A alarm output enables various combinations including warning lamps and buzzers
• Device allows you to configure temperature control and alarm control. This turns on alarm output when configured alarm value is reached.
• This temperature controller is equipped with PID temperature control system which ensures highly accurate temperature control.
• Double component structure including SSR and relay ensures that when SSR malfunctions, relay circuit blocks continuous current flow.
• To see current output status, simply check OUT lamp.

• Model number: SSVD-450
• Outer dimension (mm): 592 x 588 x 538
• Inner dimension (mm): 450 x 470 x 450
• Material: Body/stainless steel (SUS304), Door/strengthened glass, Packing/Silicone rubber,
• Allowable vacuum degree: 0.1Torr (about 13.3Pa)
• Chamber outlet AC100V 2 pieces (15A)
• Weight: Approx 60kg
• Pirani gauge sensor mounting port: 1 place
• Vacuum valve: Outer diameter f10.5mm
• Accessories: Ball valve x 2, Pressure gauge x 1 piece, Shelf board x 1
• Professional type with body that is integrated structure of stainless steel to support high vacuum(0.1Torr).
• Excellent in durability and chemical resistance with stainless steel(SUS304) body and reinforced glass door.
• There are 2 power supply outlets inside body.

• Model number: BBH-1
• Specification: Hot
• Temperature settings range (?): Room temperature +5 - 150
• External dimensions: 335 x 216 x 222mm
• Chamber dimensions: 300 x 150 x 150mm
• Body weight: Approx 7.5kg
• Heating and cooling capacity: Sheathed heater 705W
• Temperature control system: PID control
• Temperature sensor: K class thermocouple
• Material: Body/SPCC, Water tank, cover/stainless steel (SUS304)
• Withstand load: 8kg
• Power supply: 100VAC 50/60Hz with 2P <-> 3P conversion plug
• Power consumption: Approx 750W
• Safety mechanism Overcurrent protection fuse, manual reset type bimetal
• *As this machine is for beads, it cannot contain liquid contacting the water tank.
• BBCW-1 adopts peltier unit. It provides fine temperature control.
• Aluminum beads are used as heat medium instead of liquids such as water and oil. This makes it easier to heat/cool and warm specimens
• There is no risk of contamination to surrounding areas because no liquid is used. This helps keep the laboratory clean and tidy.
• Improves laboratory economy by repetitive use of aluminum beads. Samples to be inserted can be held at any angle and to any depth as desired.
• SUS304 lid is provided as standard for prevention of disturbances/heath losses as well as energy saving.

• Specification: Cool & Warm
• Outer dimensions: 335 x 241 x 266mm
• Tank inner dimensions: 300 x 150 x 150mm
• Main Weight: about 9.0kg
• Heat-cooled ability: 2 Peltier units 76W
• Temperature control method: PID control
• Temperature sensor: K class thermocouple
• Temperature settings range (?C) : R.T. -20 to 60 (? Not below 0 ?C)
• Material : Body/SPCC , water tank/Lid/Stainless steel (SUS304)
• Load tolerance: 8kg
• Power supply: AC100V 50/60Hz with 3P plug
• Power consumption: about 250W
• Safety function: Overcurrent protection fuse, manual return type bimetal
• *This machine is for beads, so you cannot put liquid in water tank.

• Model number: SPBT-UTCL
• Size (mm): 400 x 450 x 652
• Door: Left door
• Material: Steel (SPCC)
• Exterior: Melamine resin baking coating
• Door: Single door, with cylinder key (2 way out, with spare key 1 volume/unit)
• Caster: f50mm front side with 2 wheels stopper
• Movable shelf board: with 1 sheet (movable area/Height of 172.5mm from the bottom pitch of 50mm increments)
• Possible to accommodated under a laboratory table(H655*mm* or more).
• It has casters to make it possible for you to put chemicals you need just close to you for your convenience.
• Lock key is supplied as standard function, so can manage chemicals securely.
• When chemical tray is not in use, it can be stored in cabinet for each tray..
• Line-up includes left types and right types, so can choose place to place

• Model number: SPBT-UTCR
• Size (mm): 400 x 450 x 652
• Door: Right door
• Material: Steel (SPCC)
• Exterior: Melamine resin baking coating
• Door: Single door, with cylinder key (2 way out, with spare key 1 volume/unit)
• Caster: f50mm front side with 2 wheels stopper
• Movable shelf board: with 1 sheet (movable area/Height of 172.5mm from the bottom pitch of 50mm increments)
• Possible to accommodated under a laboratory table(H655*mm* or more).
• It has casters to make it possible for you to put chemicals you need just close to you for your convenience.
• Lock key is supplied as standard function, so can manage chemicals securely.
• When chemical tray is not in use, it can be stored in cabinet for each tray..
• Line-up includes left types and right types, so can choose place to place

• Model number: VRT
• external dimension (mm): 300 x 300 x 220
• Inside volume (L): about 10
• inner size: 260 x 260 x 150 mm
• Material: Main and Door / Acrylic Transparent Plastic (plate thickness: 20 mm), door packing / Silicone rubber f8
• Allowable vacuum: about 133 Pa
• Recommended vacuum pumps: (2-944-02) GM-20 D Dry vacuum pumps
• Accessories: vacuum valve (outer diameter f8 ? f 14 with hose nipple x each 1 piece), vacuum gauge, sample pressing plate, drain valve
• Highly-sealable silicon packing is used so that grease is not needed.
• Compact size makes handling of the device easy.
• Valve and vacuum gauge are placed on top face, considering suction of test liquid.
• Drain valve is equipped to make drainage of test liquid easy.
• Plate to keep sample is not fixed, therefore can remove plate and use it as vacuum desiccator.

• Size (mm): 230 x 200 x 191
• Weight (kg): about 4.2
• Set pressure range: about -0.093 MPa (Regulator Main Unit ability -0.1 MPa + pumps Reaching Pressure 0.0065 MPa)
• Integrated vacuum pumps: Diaphragm Dry pumps
• Reaching pressure: 6.65 kPa (pumps ability Limited)
• exhaust speed : 6/7 (50/60 Hz) L/min (pumps ability Limited)
• Power supply: AC100V 50/60 Hz 0.4 A
• Connection: mm f14 outer diameter hose nipple
• Accessories: Vacuum hose 1m (outer diameter f14 for mm hose nipple) x 1 piece

• Model number: Power conversion tap (TE-VC)
• Specification: 100V 15A/cable length approximately 300mm
• AC100V MAX 15A M4 round terminal (connectable to M3.5Y terminal block of body) <• > 2P outlet

• Material: Body/SPCC (acrylic paint), Top plate/Stainless steel (SUS 304)
• Motor: Induction motor
• Variable speed system: Feedback control by taco generator
• Load capacity: 22kg
• Top size: 200 x 200mm
• Speed: 60 ~ 1350 rpm
• Motor: 15W
• Stirring capacity: 20L
• Magnet/Strength (T): Samakoba/0.37
• Power supply: AC100V 50/60Hz, 2.5m 3P plug
• Maximum power consumption: 40W
• Body size: 200 x 200 (211) x 152mm (including protrusions inside ())
• *Stirring capacity and number of revolutions are for water.
• Weight: 5.0kg
• *The size of the stirrer used depends on its capacity and viscosity. Use it for different purposes.
• Insulation board is placed on stainless steel top plate, which enables stirring while oil bath is placed on it.
• With strong magnet and induction motor, possible to stir high viscosity and large capacity liquid.
• Feedback control by tacho generator, provides stable rotation from low speed to high speed.
• It provides stable rotation even in low rotation speed range.
• Adjustment dial is analog type that can set speed in proportion to dial scale.
• Dedicated fixing bracket can be attached on the back side, and by combining with support rod, it can be used as stand.

• Model number: ALJ 200-H
• Size (mm): 200 x 200 x 173 to 323
• main body material: jack / stainless (SUS430), unit unit / SPCC (melamine baking coating)
• Motor: induction motor 15 W
• power supply: AC100V 50 / 60Hz 1A
• power cord length: 2.5 m3P earthed (Conversion adapter included)
• Load tolerance: 10 kg (resting)
• Weight: About 6 kg
• * Please take care of the safety of the top board
• * We have a demo machine.
• Control unit installed under jack saves space on desk.
• Upward and downward movement(150*mm*) works at high speed(approx.20seconds).
• Compact remote controller is easy to hold and can be used for auto laboratory jack LJS-100(refer to P.*ref1*).

• Size (mm): 30 x 70 x 45
• Material: SPCC (melamine baking coating)
• Control unit installed under jack saves space on desk.
• Upward and downward movement(150*mm*) works at high speed(approx.20seconds).
• Compact remote controller is easy to hold and can be used for auto laboratory jack LJS-100(refer to P.*ref1*).