AS ONE Corporation
Ultra-Thin Type Chemical Closet (Wooden Chemical Closet) Drawer
AS ONE Corporation
• Model number: Drawer 1800
• Size (mm): 245 x 473 x 1800
• Material: Body/particle board, Rail/steel
• Shelf size: 174 x 425mm
• Number of stages: Up 2 stage rack + Down 4 stage rack
• Drawer withstand load: Upper 25kg, Lower 100kg
• Standard amount of storage : 500mL reagent bottle x 60 volumes
• Weight: 58kg
• Accessories: Key x 2 pieces
• Ultra slim chemical storage with full width less than 250*mm* does not take space, therefore enable to use extra spaces in laboratory efficiently.
• Safety specifications with earthquake resistant latch and cylinder lock.
• Special dowels that prevent shelf boards from dropping down or coming out is adopted for shelf boards of opening door type.
• Earthquake-resistant fixing brackets are supplied.
$0
Wooden Chemical Storage Unit (Ut-Lab.) 463 x 478 x 650
AS ONE Corporation
• Model number: DAP-T
• Size (mm): 463 x 478 x 650
• Material: Body/particle board, Rail/steel
• Standard amount of storage : 500mL reagent bottle x 40 volumes
• Withstand load: (Upper) 25kg, (Lower) 80kg (rail only 43kg)
• Weight: 49kg
• Possible to accommodated under laboratory table(H655*mm* or more).
• Drawers have keys with different numbers, and each drawer is partitioned with partition boards, so they can be managed securely.
• Design is coordinated with wooden laboratory table so it is arranged neat and tidy.
$0
Wooden Chemical Storage Unit (Ut-Lab.) 463 x 478 x 650
AS ONE Corporation
• Model number: DAP-G
• Size (mm): 463 x 478 x 650
• Material: Body/particle board, Rail/steel
• Standard amount of storage : 500mL reagent bottle x 40 volumes, Gallon bottle x 4 volumes
• Withstand load: (Upper) 25kg, Lower 80kg (rail only 43kg)
• Weight: 49kg
• Possible to accommodated under laboratory table(H655*mm* or more).
• Drawers have keys with different numbers, and each drawer is partitioned with partition boards, so they can be managed securely.
• Design is coordinated with wooden laboratory table so it is arranged neat and tidy.
$0
Medicine Paper Case Small
AS ONE Corporation
• Model number: for small
• Size (mm): 104 x 105 x 78
• Material: Acrylic resin
• Maximum amount of storage 1000 sheets
• Lid on case keeps medical paper clean.
• Lid opens upwards, which makes taking paper out easier.
• Entire case is sloped to keep paper sheets neatly stacked and easy to take out.
$0
Medicine Paper Case Medium
AS ONE Corporation
• Model number: for medium
• Size (mm): 119 x 120 x 78
• Material: Acrylic resin
• Maximum amount of storage 1000 sheets
• Lid on case keeps medical paper clean.
• Lid opens upwards, which makes taking paper out easier.
• Entire case is sloped to keep paper sheets neatly stacked and easy to take out.
$0
Medicine Paper Case Large
AS ONE Corporation
• Model number: for large
• Size (mm): 134 x 135 x 78
• Material: Acrylic resin
• Maximum amount of storage 1000 sheets
• Lid on case keeps medical paper clean.
• Lid opens upwards, which makes taking paper out easier.
• Entire case is sloped to keep paper sheets neatly stacked and easy to take out.
$0
Medicine Paper Case Extra-Large
AS ONE Corporation
• Model number: for extra-large
• Size (mm): 164 x 165 x 78
• Material: Acrylic resin
• Maximum amount of storage 1000 sheets
• Lid on case keeps medical paper clean.
• Lid opens upwards, which makes taking paper out easier.
• Entire case is sloped to keep paper sheets neatly stacked and easy to take out.
$0
Stainless Steel Basket Wagon
AS ONE Corporation
• Model number: NBW
• Size (mm): 740 x 450 x 1050
• Material: Stainless steel (SUS304)
• Shelf height: First stage/350mm, Second stage/880mm (height from the floor)
• Withstand load: 10 kg/shelf
• Caster: f75mm silent caster (with diagonal stopper)
• Stainless steel wagon that can hold two SUS baskets(0-1419-01~03)and be moved around.
• Each of shelves holding SUS baskets has removable drainage tray.
• Silent casters provide smooth quiet movement.
$0
Bottle Inclined Stand For Tubes
AS ONE Corporation
• Model number: For 3 tubes
• Size (mm): 308 x 62 x 108
• Material: Stainless steel (SUS304)
• Applicable reagent bottle size: Body diameter f48 - 92mm, Overall height 105 - 220mm
• Facilitates pipetting from reagent bottle.
• Compatible with reagent bottles of 100~1000*ml*.
• Made of highly chemical resistant stainless steel.
$0
Security Box for Select Lab 360 x 355 x 315
AS ONE Corporation
• Model number: M
• Size (mm): 360 x 355 x 315
• Effective inner dimension (mm): 324 x 332 x 265
• Material: Body/steel (chemical resistance resin powder coating)
• Attachable type: LOP-7L, 7, 9, LOG-7, 9, LOS-7, 9, LSG-7, 9, LSS-7L, 7, 9
• Accessories: Key 3 volumes (for cylinder lock 2 volumes, for emergency release of mechanical numeric key lock 1 volume)
• Double lock with the mechanical numeric keypad lock and cylinder lock does not required the power supply.
• Movable shelves that can be attacked inside the cabinet are supplied(L only).
$0
Security Box for Select Lab 360 x 355 x 530
AS ONE Corporation
• Model number: L
• Size (mm): 360 x 355 x 530
• Effective inner dimension (mm): 324 x 332 x 480
• Material: Body/steel (chemical resistance resin powder coating)
• Attachable type: LOP-7L, 7, 9, LOG-7, 9, LOS-7, 9, LSG-7, 9, LSS-7L, 7, 9
• Accessories: 1 shelf boards, Key 3 volumes (for cylinder lock 2 volumes, for emergency release of mechanical numeric key lock 1 volume)
• Double lock with the mechanical numeric keypad lock and cylinder lock does not required the power supply.
• Movable shelves that can be attacked inside the cabinet are supplied(L only).
$0
Flexible Needle 300mm
AS ONE Corporation
• Model number: FN-30
• Size (mm): 300
• Material: Stainless steel
• Needle tip: 90? cut
• Needle gauge: 22s
• Length: 300mm
• Connection shape: Female luer lock
• Needle part is specially treated so that it is fully bendable.
$0
Digital Syringe Pump for 1 Syringe
AS ONE Corporation
• Model number: SPDC-1
• Syringe number of hanging: 1 piece
• Size (mm): 234 x 164 x 130
• Weight (kg): Approximately 3.5
• Flow rate setting range: 0.1 - 300mL/h (maximum stroke 110mm)
• Speed range: 0.01 - 17.5mm/min
• Correspond syringe: 10 - 100mL
• Linear force: 9.5kg
• With injection movement pause function (settings changable)
• Safety device: Push block stop function, power failure display
• Power supply: 100VAC 50/60Hz (including AC adapter)
• Power cord length: 1.5m
• High viscosity liquid such as 50,000mP?s CMC can also be pumped.
• Syringe data for those of major manufacturers is already input so that you can easily select the one used.
• Multiple conditions, such as injection amount and time, and amount injected per hour, can be set.
• Setting conditions and cumulative injection amount are displayed.
$0
Digital Syringe Pump for 2 Syringes
AS ONE Corporation
• Model number: SPDC-2
• Syringe number of hanging: 2 pieces
• Size (mm): 234 x 184 x 130
• Weight (kg): Approximately 4.0
• Flow rate setting range: 0.1 - 300mL/h (maximum stroke 110mm)
• Speed range: 0.01 - 17.5mm/min
• Correspond syringe: 10 - 100mL
• Linear force: 9.5kg
• With injection movement pause function (settings changable)
• Safety device: Push block stop function, power failure display
• Power supply: 100VAC 50/60Hz (including AC adapter)
• Power cord length: 1.5m
• *Demonstration equipment is available.
• High viscosity liquid such as 50,000mP?s CMC can also be pumped.
• Syringe data for those of major manufacturers is already input so that you can easily select the one used.
• Multiple conditions, such as injection amount and time, and amount injected per hour, can be set.
• Setting conditions and cumulative injection amount are displayed.
$0
Metallic Safety Cover (For Heat Press Machine) for 5Ton
AS ONE Corporation
• Model number: AP-5
• Specification: for 5ton type
• Size (mm): 430 x 315 x 360
• Material: Stainless steel (SUS430)
• Protect workers from scattered samples during destructive test.
• Dedicated for H300 series?HC300 series?H400 series(P.213).
$0
Metallic Safety Cover (For Heat Press Machine) for 10Ton
AS ONE Corporation
• Model number: AP-10
• Specification: for 10ton type
• Size (mm): 430 x 315 x 360
• Material: Stainless steel (SUS430)
• Protect workers from scattered samples during destructive test.
• Dedicated for H300 series?HC300 series?H400 series(P.213).
$0
Metallic Safety Cover (For Heat Press Machine) for 15Ton
AS ONE Corporation
• Model number: AP-15
• Specification: for 15ton type
• Size (mm): 430 x 315 x 360
• Material: Stainless steel (SUS430)
• Protect workers from scattered samples during destructive test.
• Dedicated for H300 series?HC300 series?H400 series(P.213).
$0
Polyvinyl Chloride Safety Cover (For High Pressure Jack) for 5T
AS ONE Corporation
• Model number: SP-5
• Specification: for 5t type
• Size (mm): 422 x 290 x 314
• Material: Soft PVC (vinyl chloride resin)
• Sheet thickness 0.5mm
• Protect workers from scattered samples during destructive test.
• This highly visible transparent cover can be washed with detergent.
• SP-5 is dedicated for J-5(1-1187-02) and SP-15 for J-15(1-313-01)(Refer to above).
$0
Polyvinyl Chloride Safety Cover (For High Pressure Jack) for 15T
AS ONE Corporation
• Model number: SP-15
• Specification: for 15t type
• Size (mm): 422 x 290 x 314
• Material: Soft PVC (vinyl chloride resin)
• Sheet thickness 0.5mm
• Protect workers from scattered samples during destructive test.
• This highly visible transparent cover can be washed with detergent.
• SP-5 is dedicated for J-5(1-1187-02) and SP-15 for J-15(1-313-01)(Refer to above).
$0
High Accuracy Electroformed Sieve (Nickel Filter) (JIS) Opening Dimension 23?m Pitch 40?m
AS ONE Corporation
• Model number: S23H30 (JIS)
• Opening dimensions (?m): 23
• Pitch (?m): 40
• Material: Filter part/nickel, Frame part/stainless steel (SUS304)
• Frame standards: JIS/JISZ8801-1 (f75mm) compliance, ISO/ISO3301-1 (f75mm) compliance, ASTM/ASTM E11 (f76mm) compliance
• Hole shape: ?
• Hole Diameter intersect: +/- 0.5?m (+/- 0.8?m for 15?m or more)
• Accessories: Inspection certificate
• Frame: JIS
• Compliance Standards: Z8801
• Inner diameter (mm): 75
• Inner high (mm): 20
• Outer high (mm): 26
• Material: SUS304
• *Hole shape ? is also available.
• *H50 Series with low aperture ratio and stronger, thick mesh is also available.
• *Adding support mesh (0.21mm ? 1.8mmP) is also available. Please contact with us.
• X-ray lithography technology combined with advanced electroforming technology realizes this high accuracy sieve.
• Non-woven mesh is adopted, enabling high speed dispensing and avoiding powder clogging.
• Made of high corrosion-resistant material, this product can be used for corrosive powders.
• Since it has total inspection certificate, possible to used with confidence.
$0