AS ONE Corporation

• External dimensions (mm): 1200 x 659 x 1800
• Internal dimensions (mm): 1140 x 600 x 1510
• ?* Wooden packaging (wooden frame, pallet, etc.) is used.
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolysis dehumidifier (Rosal ?)
• Dehumidification capacity (at 30% RH): 18 hours or less
• ?* This is a reference from when the room is open to air with no internal load and an outdoor environment of 25 degrees Celsius and 60% RH (it varies depending on the outside air conditions).
• Humidity setting range: 10 ~ 60% RH
• Humidity control range: 25% RH to room temperature
• ?* These figures are for reference only when there is no internal load and the outdoor environment is 25 degrees C and 60% RH (they vary depending on outdoor air conditions).
• Measuring range: 0 ~ 60 degrees C/10 ~ 60% RH
• Temperature/humidity sensor: Temperature/thermistor element, humidity/resistance type sensor for low humidity measurement
• Dehumidifying element area: approximately 98 cm 2
• Humidity control system: microcomputer ON/OFF control
• Temperature and humidity display accuracy: +/- 1 degrees C (25 degrees C to 40 degrees C)/+/- 5% RH (15 ~ 40% RH at 25 degrees C)
• ?* The humidity indicator is LL when the humidity is less than 10%. If it exceeds 60% RH, the humidity indicator will be HH.
• Display resolution: 1 deg. C/1% RH
• Sampling interval: 0.5 sec
• Material: Body/Control Unit/Steel Plate, Front Window/Tempered Glass
• Shelf board dimensions: 1136 x 600 mm
• Shelf mounting pitch (minimum shelf spacing): 60 mm (40 mm)
• Shelf Board Specifications: Steel Plate
• Shelf load capacity: approx. 40kg/sheet (at uniform load)
• Safety device: Individual operation malfunction error display function of solid polymer electrolytic dehumidifier (when short-circuit or disconnection), overcurrent fuse
• Power supply: AC100V 50/60Hz
• Power consumption: about 63 W
• Power cord length: approx. 2 m (3P plug/body grounded)
• Caster: 100 mm in diameter, made of hard rubber (with 2 stoppers)
• Weight: 115kg
• Accessories: 4 steel shelves

• Size (mm): 252 x 121
• Material : Main unit/Zinc alloy die cast (chrome finish)
• Suitable pillar diameter: f7 to f15mm
• Suitable Bullet Diameter: 30 mm

• Size (mm): 100 x 70 x 13
• Quantity : 1 box (400 pieces)
• Material : Conductive PP (filler insertion)
• Surface resistance: 10 9 O/? or less

• Size (mm): 150 x 105 x 19
• Quantity : 1 box (400 pieces)
• Material : Conductive PP (filler insertion)
• Surface resistance: 10 9 O/? or less

• Size (mm): 200 x 140 x 25
• Quantity : 1 box (200 pieces)
• Material : Conductive PP (filler insertion)
• Surface resistance: 10 9 O/? or less

• Size (mm): 250 x 175 x 31
• Quantity : 1 box (100 pieces)
• Material : Conductive PP (filler insertion)
• Surface resistance: 10 9 O/? or less

• Size (mm): 300 x 210 x 37
• Quantity : 1 box (100 pieces)
• Material : Conductive PP (filler insertion)
• Surface resistance: 10 9 O/? or less

• Size (mm): 173 x 90 x 52
• Material : Aluminium (oxide coating)
• Tube number of storage: 0.5 mL/32 pieces, 1.5/2.0 mL/32 pieces, 15 mL/12 pieces, 50 mL/4 pieces

• Mouth inner diameter x Body diameter x Height (mm): f31.5 (f50) x 93 (96)
• Scale interval (mL): 10
• Material : Main body, Lid/PP (surface fluorination treatment)

• Mouth inner diameter x Body diameter x Height (mm): f31.5 (f63) x 128 (131)
• Scale interval (mL): 25
• Material : Main body, Lid/PP (surface fluorination treatment)

• Mouth inner diameter x Body diameter x Height (mm): f45 (f77) x 158 (161)
• Scale interval (mL): 50
• Material : Main body, Lid/PP (surface fluorination treatment)

• Mouth inner diameter x Body diameter x Height (mm): f45 (f96) x 195 (198)
• Scale interval (mL): 100
• Material : Main body, Lid/PP (surface fluorination treatment)

• Mouth inner diameter x Body diameter x Height (mm): f92 (f120) x 248 (253)
• Scale interval (mL): 200
• Material : Main body, Lid/PP (surface fluorination treatment)

• Capacity: 50mL
• Specification: Narrow-mouth
• Material : Main body, Lid/PP (surface fluorination treatment)
• Autoclavable (121?)
• Dimensions:
• *A (mm): 76
• *B (mm): 16
• *C (mm): 56
• *D (mm): 40
• *E (mm): 11
• *F (mm): 26

• Capacity: 100mL
• Specification: Narrow-mouth
• Material : Main body, Lid/PP (surface fluorination treatment)
• Autoclavable (121?)
• Dimensions:
• *A (mm): 100
• *B (mm): 20
• *C (mm): 76
• *D (mm): 47
• *E (mm): 16
• *F (mm): 33

• Capacity: 250mL
• Specification: Narrow-mouth
• Material : Main body, Lid/PP (surface fluorination treatment)
• Autoclavable (121?)
• Dimensions:
• *A (mm): 133
• *B (mm): 20
• *C (mm): 109
• *D (mm): 62
• *E (mm): 16
• *F (mm): 33

• Capacity: 500mL
• Specification: Narrow-mouth
• Material : Main body, Lid/PP (surface fluorination treatment)
• Autoclavable (121?)
• Dimensions:
• *A (mm): 167
• *B (mm): 22
• *C (mm): 141
• *D (mm): 76
• *E (mm): 20
• *F (mm): 40

• Capacity: 1L
• Specification: Narrow-mouth
• Material : Main body, Lid/PP (surface fluorination treatment)
• Autoclavable (121?)
• Dimensions:
• *A (mm): 203
• *B (mm): 22
• *C (mm): 177
• *D (mm): 95
• *E (mm): 20
• *F (mm): 40

• Capacity: 2L
• Specification: Narrow-mouth
• Material : Main body, Lid/PP (surface fluorination treatment)
• Autoclavable (121?)
• Dimensions:
• *A (mm): 244
• *B (mm): 22
• *C (mm): 218
• *D (mm): 120
• *E (mm): 42
• *F (mm): 61

• Capacity: 50mL
• Specification: Wide-mouth
• Material : Main body, Lid/PP (surface fluorination treatment)
• Autoclavable (121?)
• Dimensions:
• *A (mm): 77
• *B (mm): 20
• *C (mm): 55
• *D (mm): 40
• *E (mm): 25
• *F (mm): 40