Laboratory Consumables
Laboratory Consumables
Bag
Bag
Dissecting Instrument
Dissecting Instrument
Gas Detector Tube
Gas Detector Tube
Glassware
Glassware
Hydrometer
Hydrometer
Label Tape
Label Tape
Magnifier
Magnifier
Microscopy
Microscopy
Miscellaneous
Miscellaneous
Optical Cell
Optical Cell
Plasticware
Plasticware
Porcelain Product
Porcelain Product
PTFE / PFA Product
PTFE/PFA Product
Rack, Stand and Holder
Rack, Stand and Holder
Rubber Stopper
Rubber Stopper
Safety
Safety
Scoop and Spatula
Scoop and Spatula
Stainless Steel Product
Stainless Steel Product
Test Sieve & Sieve Shaker
Test Sieve & Sieve Shaker
Timer, Clock & Stopwatch
Timer, Clock & Stopwatch
Tubing
Tubing
Wipe and Paper Towel
Wipe and Paper Towel

Auto Dry Glove Box 847 x 485 x 450mm
AS ONE Corporation
• Material: Body/Transparent PMMA (acrylic resin), Valve, vacuum gauge mounting seat/PC (polycarbonate) resin
• Pass box allowable vacuum degree: 1Torr (approx 133Pa)
• Power supply: AC100V 50/60Hz
• Weight: 19.4kg
• Accessories: Digital Thermo-hygrometer (1-7584-21) x 1 piece, Vacuum gauge x 1 piece, Glove for Glove box (large) x 1 pair
• Size (mm): 847 x 485 x 450
• Weight (kg): 26
• Model number: AD600
• Dehumidifies inside of box with polymer electrolyte membrane.
• Maintenance cost can be minimized because there is no need to use consumables, such as silica gel, and power consumption is low.
• There is no need to use heater, fan, or motor, which may cause operation noise or vibration.
• Passbox is possible to vacuum-depressurize
$0

Auto Dry Glove Box 1047 x 535 x 500mm
AS ONE Corporation
• Material: Body/Transparent PMMA (acrylic resin), Valve, vacuum gauge mounting seat/PC (polycarbonate) resin
• Pass box allowable vacuum degree: 1Torr (approx 133Pa)
• Power supply: AC100V 50/60Hz
• Weight: 29.0kg
• Accessories: Digital Thermo-hygrometer (1-7584-21) x 1 piece, Vacuum gauge x 1 piece, Glove for Glove box (large) x 1 pair
• Size (mm): 1047 x 535 x 500
• Weight (kg): 36
• Model number: AD800
• Dehumidifies inside of box with polymer electrolyte membrane.
• Maintenance cost can be minimized because there is no need to use consumables, such as silica gel, and power consumption is low.
• There is no need to use heater, fan, or motor, which may cause operation noise or vibration.
• Passbox is possible to vacuum-depressurize
$0

Auto Dry Glove Box 1247 x 535 x 500mm
AS ONE Corporation
• Material: Body/Transparent PMMA (acrylic resin), Valve, vacuum gauge mounting seat/PC (polycarbonate) resin
• Pass box allowable vacuum degree: 1Torr (approx 133Pa)
• Power supply: AC100V 50/60Hz
• Weight: 39.0kg
• Accessories: Digital Thermo-hygrometer (1-7584-21) x 1 piece, Vacuum gauge x 1 piece, Glove for Glove box (large) x 1 pair
• Size (mm): 1247 x 535 x 500
• Weight (kg): 51
• Model number: AD1000
• Dehumidifies inside of box with polymer electrolyte membrane.
• Maintenance cost can be minimized because there is no need to use consumables, such as silica gel, and power consumption is low.
• There is no need to use heater, fan, or motor, which may cause operation noise or vibration.
• Passbox is possible to vacuum-depressurize
$0

Automatic Gas Cylinder Switching Device (Sub Tank)
AS ONE Corporation
• Size (mm): 70 x 230 x 255
• Connection port: outer diameter f6mm rigid tube or Rc 1/8 female screw
• Operating pressure: 0.005MPa *
• pressure of use: 0.08MPa or less * The product will not operate if the pressure difference between the two paths is less than this.
• Accessories: Cartridge cartridge x 1 piece
• [cartridge cartridge cartridge]
• Cartridge size: CO2/approx. f40 x 134mm
• Connection shape: 5/8 -18 UNF female screw
• Amount of gas to be filled: CO 2/40 L (74 g) ? Standard: About 3 days in 1 piece (It depends on how you use it.)
• *Cartridges are consumables. It does not regenerate even when pressurized.
$0

Twin COND Meter II LAQUAtwin (Waterproof)
AS ONE Corporation
• Quantity: 1 type
• Measurement range: 0 to 199.9mS/cm (0 to 19.9 S/m) , 0 to 9900 ppm
• Resolution
• *10 to 199?S/cm: 1?S/cm
• *2200 to 1999?S/cm: 1?S/cm
• *32.0 to 19.99mS/cm: 0.01mS/cm
• *420.0 to 199.9mS/cm: 0.1mS/cm
• Temperature display range: 0 to 50 ?/0.1 ?
• Calibration: Up to 3 points
• Accuracy
• *Accuracy Range 1 to 3 to ?2% F.S.
• *?5% F.S. against Range 4.
• Key Features
• *Automatic range switching, automatic recognition of standard solution, temperature conversion (25 ? Temperature Conversion Factor 2% fixed),
• *Temperature sensor adjustment function, auto hold, auto stability function, auto power off (30 minutes),
• *Battery level indicator, sensor replaceable, TDS conversion function (Factor (0.4 to 1.0), 442, NaCl, EN 27888)
• Waterproof: IP67
• environment used : 5 to 40 ? , 85% relative humidity or less (Not dew condensation)
• Power supply : CR 2032 Button battery x 2 pieces (test attachment)
• external dimensions/Weight : 164mm x 29mm x 20mm (excluding projections)/about 50g (excluding battery)
• Accessories: Eyedropper 1 piece, Instruction Manual, Quick Manual, Storage Case, Standard Conductivity Solution (1.41mS/cm) 1 piece (14 mL), Treatment Solution 1 piece (14 mL)
• It is possible to perform drop measurement with a small sample (0.12 mL ~).
• It can perform various measurements such as dropping, dipping, scooping and wiping (when using the sampling sheet of the attached consumables).
• Equipped with a backlight liquid crystal, measurement values can be checked even in dark places.
$0