AS ONE Corporation

• Model number: PST-2486-ESA-R2
• Size (mm): 100 x 500 x 200
• Weight (g): 2.4
• Tip movable type
• Imaging element: CMOS sensor
• Resolution: 640 x 480
• Focal length: 2 - 10cm
• Light source: White color LED x 4 pieces
• Camera head diameter: f5.5mm
• Frame rate: 30fps(MAX)
• Memory: SD card (4GB)
• With analog video terminal output
• Power supply: Lithium ion battery (AC adapter included)
• Cable length: 1m
• Dustproof, waterproof: IP57 (excluding body)
• Because it is flexible cable, possible to see in back of small gap.
• This scope is also possible aspect of observation if mounting the supplied mirror head.

• Material: Main body / transparent reinforced PMMA (acrylic) (plate thickness: 20 mm), valve vacuum gauge mounting / PC (polycarbonate)
• Allowable vacuum: 1 Torr (about 133 Pa)
• Weight: 8.6 kg
• The length of power cord: about 2.9 m (3P Plug)
• Model Number: VM
• external dimension (mm): 250 x 250 x 380
• inner size (mm): 210 x 210 x 210
• No outlet
• Accessories: vacuum gauge ? 1 piece, vacuum valve: Small / outer diameter f8 mm Large / f 14 mm (Each 1 piece)
• Recommended vacuum pumps: Dry vacuum pumps DTC-22, (1-671-06) Dry vacuum pumps DA-20 D (1-4148-11)
• * Including valve cells.
• Silicon packing having high sealing performance, and grease is not required.
• VM-C equips socket inside of box and switch outside of box.

• Material: Main body / transparent reinforced PMMA (acrylic) (plate thickness: 20 mm), valve vacuum gauge mounting / PC (polycarbonate)
• Allowable vacuum: 1 Torr (about 133 Pa)
• Outlet inside: AC100V 15 A3 Px 1 x 1 piece
• Weight: 8.6 kg
• power supply switch: toggle switch x 1 piece
• The length of power cord: about 2.9 m (3P Plug)
• Type number: VM-C type
• external dimension (mm): 250 x 250 x 380
• inner size (mm): 210 x 210 x 210
• With outlet
• Accessories: vacuum gauge ? 1 piece, vacuum valve: Small / outer diameter f8 mm Large / f 14 mm (Each 1 piece)
• Recommended vacuum pumps: Dry vacuum pumps DTC-22, (1-671-06) Dry vacuum pumps DA-20 D (1-4148-11)
• * Including valve cells.
• Silicon packing having high sealing performance, and grease is not required.
• VM-C equips socket inside of box and switch outside of box.

• Model number: TH-900
• Highest temperature: 300 ?
• Plate size: 150 x 200mm (3 sides)
• Plate material: Aluminum (anodic oxide processing)
• Temperature distribution width: Within 5?
• Control system: PID control
• Main unit size: 530 x 270 x 137mm
• Weight: 11.5kg
• Withstand load: Approximately 3kg (1 plate)
• Heater capacity: 450W x 3
• Power supply: AC100V 50/60Hz15A
• Power cord length: 2.5m (3P, with ground pin)
• (3 tandem type)
• Possible for temperature control independently as 3 plates.

• Model number: ATM-02
• Size (mm): 190 x 170 x 122
• Hot plate: Aluminum block (teflon coating)
• Heater: Cartridge heater (120V x 60W x 1 piece)
• Measurement temperature range: Room temperature - 300?
• Temperature display: Digital display (unit is 1?)
• Temperature sensor: Pt resistance temperature detector
• Temperature adjustment: Thyristor Voltage control method
• Visual loupe: Steinheil loupe, at 5-fold magnification
• Casing: Steel plate baking coating
• Cover: PMMA (acrylic)
• Power supply: 100VAC 50/60Hz
• Body weight: 2.2kg
• Power cord: 1.5m (3P plug)
• *Cover glass is not attached.
• Melting point and softening point of compound and resin and wax etc. can measure simply.
• The overheating prevention function is equipped.
• Since Teflon*R* coating of heat board is carried out, hard to become dirty.
• ATM-02 has flat heat board and suitable for measurement by clipping with coverglass.

• Model number: HC-80
• Size (mm): 150 x 185 x 373
• main body material: stainless steel (SUS304)
• temperature settings range: R.T. + 10 to 80 ? C
• Temperature adjustment accuracy: ? 2 ? C (Performance of a single controller)
• Temperature control method: PID control
• Temperature display: LCD digital display
• Heater capacity: 900 W
• Safety device: Circulating water discharge detection and alarm lamp display (ON) (Heater pumps power supply OFF)
• pumps: Magnet pumps (Pump priming needs), maximum pumping volume 2.1 to 2.7 m, circulating water volume 5.5 / 6.0 L/min, viscosity range: 30 mPa*s or less
• power supply: AC100V 50 / 60Hz 15 A
• Weight is about 4.5 kg
• * The hose is not included. inner diameter f 12 mm hoses are available
• * Not available for pure water.
• Integrates pipe heater and circulation pump to heat and stir water inside.
• If circulation water flow stops, water stoppage detector shuts off heater pump power and turns on warning lamp.

• Model number: LM-331
• Measurement range (lx): 0.01 - 20000
• Resolution (lx): 0.01
• Display: 3.5 digits LCD display (backlight)
• Accuracy: ?(5%rdg + 10dgt)
• Sampling: 2.5 times/second
• Sensor: Silicone photo diode
• Power supply: 006P (9V) cell x 1 piece (included for test)
• Size: 190 x 65.5 x 35mm
• Weight: 210g
• Accessories: Sensor
• It is with peak hold function displayed with peak value at the time of measurement.
• It is with fixed pin which can fix sensor to main part.

• Model number: LM-332
• Measurement range (lx): 0.1 - 200000
• Resolution (lx): 0.1
• Display: 3.5 digits LCD display (backlight)
• Accuracy: ?(5%rdg + 10dgt)
• Sampling: 2.5 times/second
• Sensor: Silicone photo diode
• Power supply: 006P (9V) cell x 1 piece (included for test)
• Size: 190 x 65.5 x 35mm
• Weight: 210g
• Accessories: Sensor
• It is with peak hold function displayed with peak value at the time of measurement.
• It is with fixed pin which can fix sensor to main part.

• Model number: LMP-100
• Discharge air volume: 18/22L/min
• Achieving vacuum degree: 133mbar (100Torr, 13.3kPa)
• Size: 224 x 206 x 254mm
• Weight: 6.6kg
• Displacement: 18/22L/min
• Highest pressure: 6.8bar (99PSIG)
• Connection port size: 8mm
• Gas contact unit material: Aluminum, Stainless steel, Teflon
• Power supply: AC100V 50/60Hz 4.6/3.3A
• For both discharge and suction
• There is no mixing of oil with oil-free dry pump.
• Possible to use it for the suction side, equipping the water trap and pressurization side standardly with the air filter, and feeling easy.
• The regulator with gauge is equipped for suction and pressurization.

• Model number: RM-300
• Size (mm): 330 x 300 x 220
• Shaking method: Up or down
• Shaking speed: 0 - 70rpm (volume stepless variable type)
• Obliquing angle: ?9?
• Withstand load: 10.0kg
• Ambient temperature range: 65? or lower (dry air)
• Timer: 0 - 180 minutes
• Shaking table dimensions: Internal dimensions/300 x 300mm, External dimension/330 x 300mm
• Power supply: 100VAC +/- 10% 50/60Hz
• Power cord length: 1.8m (3P plug)
• Weight: 8.2kg
• *Height is the maximum tilting size.
• Excellent in stability at low speed due to provided DC motor.
• Features fixing band of second platform for flasks, etc.(RM-300 only).
• Dimple pad is useful for stabilizing conical tubing, etc. and second platform is used to divide shaker table into 2tiers.

• Model number: AS-01
• Size: 330 x 265 x 390mm
• Displacement: 18L/min
• Motor: 150W
• Aspirator material: Made of metal x 2 pieces
• Tank capacity: Approx 10L
• Tank material: PP (Polypropylene)
• Suction port diameter: f9.5mm
• Feed drainage: Overflow (f17mm), Drainage Cock (f17mm)
• Power supply: 100VAC 50/60Hz 1.5A
• Weight: 5.7kg
• Accessories: Silicone tube for suction (inner diameter x outer diameter x length: f6mm x f12mm x 1m) x 1 volume, Y-type Connector x 1 piece
• Excellent in chemical resistance and durability.
• Regulation of vacuum can be performed by using regulator with vacuum meter.
• Drain cock can perform drainage in a tank easily

• Model number: Regulator with vacuum gauge
• Regulator with vacuum gauge
• Nipple Size Inner diameter, Outer diameter/f5.8 mm, f8.0mm, Speed controller/PT1/8
• Excellent in chemical resistance and durability.
• Regulation of vacuum can be performed by using regulator with vacuum meter.
• Drain cock can perform drainage in a tank easily

• Rotation speed (rpm): 300 to 2500
• Outer dimensions (mm): 320 x 357 x 320
• Temperature adjustment range: R.T. -15 to 60 ?C
• Temperature setting display: Digital setting display (Every 0.1 ?C)
• Stirring method: horizontal shaking
• Timer: 60 minutes
• Power supply: AC100V 50/60Hz 6A , code length/2.5 m (3P plug)
• Weight: about 13kg
• Applicable container: SBS standards Plate 2 pieces or dedicated rack
• Applicable racks: Dedicated racks A, B, E

• Rotation speed (rpm): 50 to 500
• Outer dimensions (mm): 320 x 357 x 320
• Temperature adjustment range: R.T. -15 to 60 ?C
• Temperature setting display: Digital setting display (Every 0.1 ?C)
• Stirring system: Swirling system
• Timer: 60 minutes
• Power supply: AC100V 50/60Hz 6A , code length/2.5 m (3P plug)
• Weight: about 13kg
• Applicable containers: dedicated racks
• Applicable racks: dedicated racks C, D

• Model number: 1 type
• Size: 300 x 200 x 52mm
• Material: PMMA (acrylic)
• Plate thickness: 15mm
• With 4 legs adjuster
• Withstand load: Approx 30kg
• With level
• This balance table with level is suitable for the apparatus which is important to keep horizonal levels, such as deixis balance and precision instruments.

• Model number: 2 type
• Size: 450 x 300 x 52mm
• Material: PMMA (acrylic)
• Plate thickness: 15mm
• With 4 legs adjuster
• Withstand load: Approx 30kg
• With level
• This balance table with level is suitable for the apparatus which is important to keep horizonal levels, such as deixis balance and precision instruments.

• Temperature settings range: Room temperature +5? - 95?
• Chamber capacity: f208 x 120mm
• Control system: Microcomputer type proportional control
• Setting system: Analog scale method (scale width 5?)
• Display system: Dial scale display
• Temperature sensor: Bending thermometer (Pt100O)
• Heater material: Stainless steel (SUS304), Pipe heater
• Heater capacity: 750w
• Power switch: Rocker switch
• Safety device: Overcurrent protection fuse, Temperature fuse
• Power supply: 100VAC, 50/60Hz
• Accessories: Stick thermometer
• External dimensions: 250 x 310 x 150mm
• Model number: HWA-50A
• Pursued functionality and temperature control stability.
• Adopt microcomputer type proportional control(HWA-50A) and microcomputer type PID control(HWD-50D) as temperature control, and perform highly precise temperature control.
• Large-sized dial(HOA-50A) and 2-steps of PV-SV digital display(HOA-50D) excellent in operativity is adopted as temperature setting.
• Adopt LED for prevention from burn as main part, and consider safety.

• Temperature settings range: Room temperature +5? - 95?
• Chamber capacity: f208 x 120mm
• Control system: Microcomputer type PID control
• Setting system: Sheet key input system
• Display system: LED digital display
• Temperature sensor: Bending thermometer (Pt100O)
• Heater material: Stainless steel (SUS304), Pipe heater
• Heater capacity: 750w
• Power switch: Rocker switch
• Safety device: Overcurrent protection fuse, Temperature fuse + burnout mechanism
• Additional function: Timer function
• Power supply: 100VAC, 50/60Hz
• Accessories: Stick thermometer
• External dimensions: 250 x 310 x 150mm
• Model number: HWA-50D
• Pursued functionality and temperature control stability.
• Adopt microcomputer type proportional control(HWA-50A) and microcomputer type PID control(HWD-50D) as temperature control, and perform highly precise temperature control.
• Large-sized dial(HOA-50A) and 2-steps of PV-SV digital display(HOA-50D) excellent in operativity is adopted as temperature setting.
• Adopt LED for prevention from burn as main part, and consider safety.

• main body material: Body / Transparent Reinforced PMMA (acrylic) plate thickness 8 mm, top board bottom plate / reinforced PMMA (acrylic) plate thickness 20 mm, valve vacuum gauge mounting / PC (polycarbonate)
• Weight: 5.8 kg
• Allowable vacuum: 1 Torr (about 133 Pa)
• Model Number: VZ type
• external dimension (mm): 268 ? 450 * vacuum meter
• inner size (mm): 234 x 298
• Accessories: vacuum valves: (small) outer diameter f8 mm x 1 piece (large) outer diameter f 14 mm x 1 piece, vacuum gauge x 1 piece
• Recommended vacuum pumps: (1-4148-11) Dry vacuum pumps DTC-22, (1-671-06) Dry vacuum pumps DA-20 D

• Model number: MR-01
• Material: TTH-340W (Titanium pipe type II)
• Heat transfer area: 0.1m2
• Cooling water flow rate: 4 - 10L/min
• Cooling tube plate thickness: 0.5tmm
• Joint: Outer diameter 10.5mm
• Coil size (Outer diameter x Length): f10mm x 3.4m
• Main unit size: f100 x 160 (overall height of 315) mm
• Accessories: Stainless Steel (SUS304) support
• Contents fluid can be powerfully cooled by passing cold water.