AS ONE Corporation

• Model number: MR-02
• Material: TTH-340W (Titanium pipe type II)
• Heat transfer area: 0.14m2
• Cooling water flow rate: 4 - 10L/min
• Cooling tube plate thickness: 0.5tmm
• Barb: Outer diameter 10.5mm
• Coil size (Outer diameter x Length): f10mm x 4.5m
• Main unit size: f100 x 196 (overall height of 350) mm
• Accessories: Stainless Steel (SUS304) support
• Contents fluid can be powerfully cooled by passing cold water.

• Material: Borosilicate glass
• ASTM standards compliance
• Capacity: 50mL
• Maximum diameter x height: f50 x 78mm
• 1 scale: Every 10mL from 20mL

• Material: Borosilicate glass
• ASTM standards compliance
• Capacity: 200mL
• Maximum diameter x height: f79 x 119mm
• 1 scale: Every 25mL from 75mL

• Material: borosilicate glass
• ASTM standards compliant
• Capacity: 300 mL
• Maximum diameter x height: f 90 x 145 mm
• One scale: every 100 to 25 mL

• Material: Borosilicate glass
• ASTM standards compliance
• Capacity: 500mL
• Maximum diameter x height: f104 x 169mm
• 1 scale: Every 50mL from 150mL

• Model number: KL-01
• Temperature settings range: -50 - 300?
• Mechanism: Variable type high limiter
• Control system: Expansion control by liquid expansion capillary system
• Number of poles: 1
• Power supply: 100VAC 50/60Hz
• Power cord length: Approximately 2.8m (with 3P plug, adapter )
• Connection capacity of used instrument: AC100V MAX 15A
• Size: Liquid expansion type capillary pipe/1730mm, Sensor/f9 x 91.5mm
• Material: Stainless steel (SUS304)
• Capillary material: Body exterior/steel melamine bake coating
• Thermostat: EGO product numbers 55, 13455, 010
• Main unit size: 140 x 88 x 50/91mm
• Cut temperature can be set up by variable type high limiting circuit.
• If temperature reading on thermometer becomes high from preset temperature of use apparatus, current will be cut automatically, but even if temperature reading on thermometer falls, don't return.

• Model number: MH-180CS
• Highest temperature: 300 ?
• Plate size: 200 x 150mm
• Plate material: Aluminum (anodic oxide surface processing)
• Hot plate
• Temperature distribution width: Within 5?
• Controller temperature display precision: +/- 1% (SV) + 1 digit error
• Heater capacity: 450W
• Temperature control system: PID control
• Power supply: 100VAC 50/60Hz
• Weight: 3.5kg
• Accessories: Controller connection cable 2m x 1
• Main unit size: 250 x 200 x 90mm
• *You cannot use this alone. Purchase a controller.

• Model number: MH-3CS
• Controller
• Temperature display precision: +/- 1% (SV) + 1 digit error
• Control system: PID control
• Power supply: 100VAC 50/60Hz
• Weight: 2.5kg
• Main unit size: 150 x 250 x 87mm
• *You cannot use a controller alone. Purchase it with a main unit.

• Model number: SPY
• Size (mm): 550 x 250 x 303
• Material: Body/steel plate melamine resin bake coating, Sponge/CR sponge rubber
• Caster: f40mmPA (Nylon) made (with stopper)
• Stick the sponge rubber of 10*mm* thickness on top plate, and suppress the noise by vibration.
• The compact dimensions and storable near the step of the laboratory bench.

• Model number: FKD-600SAD
• Size (mm): 600 x 548 x 500
• Weight (kg): 12.2
• HEPA filter dust collection efficiency: 99.97% or more (0.3?m particle)
• Vent wind speed (when 60 Hz): FKD-600SAD/about 0.4m/s, FKD-900/about 0.5m/s
• Dust collection method: Nonwoven fabric pre-filter, Antibacterial and deodorant HEPA Filter
• Power supply: AC100V 50/60Hz
• Power cord length: 1.7m (2P type)
• Power consumption (50/60Hz): FKD-600SAD/about 36/38W, FKD-900/about 52W
• Body material: Aluminum frame + PMMA (acrylic)
• Door material: PMMA (acrylic)
• Inner dimension: FKD-600SAD/520 x 360 x 360mm, FKD-900/820 x 500 x 560mm
• Accessories: Unit with HEPA filter
• Exhaust is discharged from prefilter through HPA filter and then work area.
• Transparent acrylic boards are adopted for peripherals, so possible to observe the inside easily.

• Model number: FKD-600ADW
• Size (mm) *1: 600 x 548 x 500
• Weight (kg): About 12.2
• Material: Aluminum and PMMA (acrylic)
• HEPA filter dust collection efficiency: 99.97% or more (0.3?m particle)
• Vent wind speed (when 60 Hz): About 0.5m/s
• Dust collection method: Nonwoven fabric pre-filter, Antibacterial and deodorant HEPA Filter
• Power supply: AC100V 50/60Hz
• Power consumption (50/60Hz): About 36W/38W
• Power cord length: 1.8m (2P type)
• Opening: f120mm (natural rubber with cut)
• Inner dimension: 520 x 360 x 360mm
• Accessories: Unit with HEPA filter (made of SUS)
• *1 Depth when exhaust unit mounted on the rear side: 568mm
• *Is not available for adjustment operation of anticancer agent.
• *Rear exhaust Type: must be placed away from the wall.
• Transparent acrylic boards are adopted for the peripherals, so you can observe the inside easily.
• The exhaust unit is attachable on either of the back side or the top.
• The door can be fixed in stages from 13*mm*(full closed)to 305*mm*(full open)
• Since an antibacterial/deodorant filter is adapted, clean air is discharged to the outside.

• Model number: ATC-1
• Size: 350 x 350 x 350mm
• Material: PMMA (acrylic)
• It is possible to use as storage box avoiding dust, and it can be used as wind shield by large dimensions.
• There is one hole for let power supply cord out.

• Model number: EC-7050
• Highest temperature: 300 ?
• Plate size: 700 x 500mm
• Plate material: Aluminum
• Power supply: AC200V?10% 50/60Hz
• Temperature sensor: K class thermocouple
• Main unit size: 750 x 550 x 162mm
• Heater capacity: 2.6kW
• Withstand load: Approx 25kg (however, distributed load to 80% of plate area)
• Weight: Approx 30kg
• Power cord length: Approx 2m
• Outlet shape: Single phase 200V with an earth
• *Please be careful of power and outlet shape.
• Control Panel : English
• The timer set of 3patterns is possible.
• Quantity more than offer can products be heated at once by large-sized top plate.
• Preset temperature and current temperature can check at a glance by 2steps display.

• Model number: DSP-100SA
• Flow rate range: When using cartridge L/0.05 - 10.0mL/min (setting is 0.05mL/min unit)*, When using cartridge H/0.5 - 100mL/min (setting is 0.5mL/min unit)*
• Flow rate accuracy: Within ?3% compared to setting flow rate (water)
• Rotation speed setting range: 0.5 - 100rpm (0.5rpm unit)
• Motor: Stepping motor
• Flow rate correction function: Correction available until ?30% compared to setting flow rate (1% unit)
• Tube consume status display: Countdown system from 100% (warning display at 0%)
• Timer function: Maximum 12 hours
• tube cartridge material: Silicone rubber
• Power supply: AC100 - 240V 50/60Hz (2P plug)
• Accessories: tube cartridge H, AC adapter
• Size: 130 x 190 x 140mm
• *To use within ?3% compared to setting flow rate at minimum flow rate area, flow rate correction operation (input of our recommended correction value) is required. *This product can be used only with tube cartridge.
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• The desired flow rate can be set in digital.
• The flow rate accuracy is as high as ?3% against the preset flow rate(in the case of water).
• The stepping motor assures a high flow rate(number of rotations) stability, repeated accuracy and durability.
• The flow rate correction function is convenient when a difference is generated between the preset flow rate and the actual flow rate.
• The tube replacement timing notice function is useful to maintain the flow rate accuracy.

• Model number: tube cartridge L
• Material: Silicone rubber
• The desired flow rate can be set in digital.
• The flow rate accuracy is as high as ?3% against the preset flow rate(in the case of water).
• The stepping motor assures a high flow rate(number of rotations) stability, repeated accuracy and durability.
• The flow rate correction function is convenient when a difference is generated between the preset flow rate and the actual flow rate.
• The tube replacement timing notice function is useful to maintain the flow rate accuracy.

• Model number: tube cartridge H
• Material: Silicone rubber
• Autoclavable

• Material: Stainless steel (SUS304)
• Withstand load: 20kg (equal load)
• Allowable temperature limit: 250?
• Size: f350 x 250 x 110mm
• Model number: KO-3
• With this stand, large container such as cooler box or heavy object(10*kg* or more) can be put on the stirrer.
• Put this stand on stirrer for heat insulation when putting object whose bottom temperature is 100? or more, such as oil bath.
• Use this stand as frame for stirring large vessel which cannot be put directly on stirrer.

• Model number: MSA-1N
• Type: Analog
• Size (mm): 200 x 200 x 99
• Stirred capacity: 20L
• Motor: DC brushless motor
• Magnet: Neodium magnet (f19 x 10mm) x 10 pieces
• Material: top board, body exterior/stainless steel (SUS304)
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (3P plug, with 2P conversion adapter)
• *Demonstration equipment is available.
• By arranging 10 strong Neodymium magnets in way magnetic line runs upward, it enables stirring while water bath or like is placed.
• Strong magnets and powerful DC brushless motor enable not only stirring high viscosity samples but also using large stirring bar(100mm or more in length).
• Exterior is stainless steel that gives high chemical resistance, and its structure makes it difficult for liquid to enter body.
• Feedback control makes rotation speed stable even while viscosity changes.
• Container position display on top plate is not printed but laser fabricated, which is durable and will not be dimmed easily. ?It may not turn, if magnetic force of stirring bar or frictional force due to contact area is large.

• Model number: MSD-1N
• Type: Digital
• Size (mm): 200 x 200 x 99
• Stirred capacity: 20L
• Motor: DC brushless motor
• Magnet: Neodium magnet (f19 x 10mm) x 10 pieces
• Material: top board, body exterior/stainless steel (SUS304)
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (3P plug, with 2P conversion adapter)
• By arranging 10 strong Neodymium magnets in way magnetic line runs upward, it enables stirring while water bath or like is placed.
• Strong magnets and powerful DC brushless motor enable not only stirring high viscosity samples but also using large stirring bar(100mm or more in length).
• Exterior is stainless steel that gives high chemical resistance, and its structure makes it difficult for liquid to enter body.
• Feedback control makes rotation speed stable even while viscosity changes.
• Container position display on top plate is not printed but laser fabricated, which is durable and will not be dimmed easily. ?It may not turn, if magnetic force of stirring bar or frictional force due to contact area is large.

• Material: PE (polyethylene), tube / Silicone rubber, weight / stainless steel (SUS304)
• Capacity: 1L
• Model number: MK-BS type
• * Prices per 1 piece.
• weight at internal tube tip assures discharge even if bottle is tilted or upside down.