AS ONE Corporation

• Mortar
• Material: Body/agate (SiO2 100%), Cover/PMMA (Acrylic), Pedestal/rubber
• Mortar size (mm): f110 x 48
• Weight: 1160g
• Model number: 10g octagon
• *Check usable products for stirrer, Before placing an order.
• A magnet pestle revolves around the sun with rotation, and grinds.
• The silicon rubber sheet is attached so that a mortar may not shift by vibration.
• A pulverization thing does not jump out outside with a lid.

• Mortar
• Material: Body/agate (SiO2 100%), Cover/PMMA (Acrylic), Pedestal/rubber
• Mortar size (mm): f130 x 55
• Weight: 1620g
• Model number: 15g octagon
• *Check usable products for stirrer, Before placing an order.
• A magnet pestle revolves around the sun with rotation, and grinds.
• The silicon rubber sheet is attached so that a mortar may not shift by vibration.
• A pulverization thing does not jump out outside with a lid.

• Mortar
• Material: Body/agate (SiO2 100%), Cover/PMMA (Acrylic), Pedestal/rubber
• Mortar size (mm): f150 x 65
• Weight: 2590g
• Model number: 20g octagon
• *Check usable products for stirrer, Before placing an order.
• A magnet pestle revolves around the sun with rotation, and grinds.
• The silicon rubber sheet is attached so that a mortar may not shift by vibration.
• A pulverization thing does not jump out outside with a lid.

• Mortar
• Body material: Agate (SiO2 100%), Cover/Silicone, -, Pedestal/rubber
• Mortar size (mm): f110 x 60
• Weight: 880g
• Model number: 25g cylinder
• *Check usable products for stirrer, Before placing an order.
• A magnet pestle revolves around the sun with rotation, and grinds.
• The silicon rubber sheet is attached so that a mortar may not shift by vibration.
• A pulverization thing does not jump out outside with a lid.

• Mortar
• Body material: Agate (SiO2 100%), Cover/Silicone, -, Pedestal/rubber
• Mortar size (mm): f130 x 70
• Weight: 1500g
• Model number: 35g cylinder
• *Check usable products for stirrer, Before placing an order.
• A magnet pestle revolves around the sun with rotation, and grinds.
• The silicon rubber sheet is attached so that a mortar may not shift by vibration.
• A pulverization thing does not jump out outside with a lid.

• Pedestal
• Material: Rubber
• Size (mm): 120 x 40
• Correspondence agate mortar size (inner diameter outer diameter depth): f90 x f110 x 38mm
• Weight: 550g
• Model number: MEG-10G
• A magnet pestle revolves around the sun with rotation, and grinds.
• The silicon rubber sheet is attached so that a mortar may not shift by vibration.
• A pulverization thing does not jump out outside with a lid.

• Mortar type: Official type
• Material: Body/porcelain, Cover/Silicone rubber
• Pestle size: f55 x 52mm
• Pestle size: f110 x 56mm
• Pestle weight: 180g
• Set total weight: 480g
• Standard grinding amount (purified salt): 80g
• Set content: Mortar, cover, magnet pestle x 1 piece each
• Model number: 80g porcelain*
• *Stirrer and rubber base are required for grinding.
•
• Dry grinding and wet grinding are possible.
•
• Powerful stirrer dedicated to magnet mortar and piston crusher.
• Tensile force of approx.2*kg*.
• Magnet pulverize while pulling 1 piece of mortar.
• Magnets?pistons are crushed by piston pulling up and down in unit of 1piece.

• Mortar type: Official type
• Material: Body/porcelain, Cover/Silicone rubber
• Pestle size: f55 x 52mm
• Mortar size f130 x 67mm
• Pestle weight: 180g
• Set total weight: 650g
• Standard grinding amount (purified salt): 130g
• Set content: Mortar, cover, magnet pestle x 1 piece each
• Model number: 130g porcelain*
• *Stirrer and rubber base are required for grinding.
•
• Dry grinding and wet grinding are possible.
•
• Powerful stirrer dedicated to magnet mortar and piston crusher.
• Tensile force of approx.2*kg*.
• Magnet pulverize while pulling 1 piece of mortar.
• Magnets?pistons are crushed by piston pulling up and down in unit of 1piece.

• Model number: SIC-350
• Inner dimension (mm): 460 x 585 x 1285
• Outer dimension (mm): 600 x 835 x 1730
• Air jacket type natural convection system
• Temperature settings range: Room temperature +5 - 60?
• Temperature distribution width: +/- 1? (37? when setting)
• Sensor: K class thermocouple
• Temperature adjustment: PID control, SSR output
• Timer function: ON, OFF, ON/OFF, SV start
• Timer setting range: 1 minute - 99 hours 59 minutes
• Heater capacity: 700W
• Safety device: Excessive temperature rise prevention device, overcurrent breaker
• Power supply: 100ACV 50/60Hz 8A
• Power cord length: 3m (2P plug)
• Exterior, interior: Stainless steel (SUS430)
• Shelf board material: Steel chromium plating finish
• Shelf load: 15kg/sheet (Max)
• Caster: f50mm (with stoppers)
• Weight: 80kg
• Accessories: Shelf board x 5 boards
• It is easy to observe the inside with large insulated glass window.
• Air-jacketed natural convection system in which hot air is circulated through jacket of outside features excellent in temperature distribution and can control the stable temperature.
• Because both exterior and interior are made of stainless steel, it can be used cleanly.
• It is equipped with 4 kinds of timer function(ON?OFF?ON/OFF?SV start).

• Model number: Preliminary shelves
• Material: Steel chromium plating finish
• Shelf load: MAX 15kg/sheet
• Shelf board dimensions: 438 x 593mm

• Material: Stainless Steel (SUS304)
• Autoclavable
• Model number: MH
• Size (mm): 120 x 146 x 40
• It is convenient, when tweezers, scissors and scalpels cannot be put on desk directly at the time of work.

• Model number: MMF-1
• External dimensions: 240 x 251 x 351mm
• Inner furnace dimension (mm): 120 x 155 x 100 *Including sensor protrusions
• Temperature settings range: 100 - 900? (regular use: 800?)
• Sensor: K class thermocouple
• Control system: PID control
• Program function: 16 steps, 4 patterns
• Temperature settings unit: 1?
• Time settings unit: 1 minute
• Exterior: Steel coating
• Interior: Ceramic fiber
• Heater (4 side heater): 800W
• Power supply: 100VAC 50/60Hz
• Power cord length: 2m (3P plug)
• Weight: 7kg
• Accessories: Ceramic board, tweezers (240mm)
• Even 4-patterns can set up program of 16-steps.
• Possible to use it to heat treatment, caloric test, etc., because it has PID control which high temperature control accuracy.
• At the time of abnormalities in temperature, burnout function which builds in safety circuit which intercepts heater and detects abnormalities in sensor is also equipped.
• Although it is lightweight and compact, inside of furnace is designed widely.
• Setup of temperature gradient is possible.
• Time for temperature rise is shortened by adoption of 4-sides-heater.
• W-series can observe state of sample with window for observation in furnace.

• Model number: MMF-2
• External dimensions: 320 x 286 x 428mm
• Inner furnace dimension (mm): 170 x 170 x 150 *Including sensor protrusions
• Temperature settings range: 100 - 900? (regular use: 800?)
• Sensor: K class thermocouple
• Control system: PID control
• Program function: 16 steps, 4 patterns
• Temperature settings unit: 1?
• Time settings unit: 1 minute
• Exterior: Steel coating finish
• Interior: Ceramic fiber
• Heater (4 side heater): 1000W
• Power supply: 100VAC 50/60Hz
• Power cord length: 2m (3P plug)
• Weight: 15kg
• Accessories: Ceramic board, tweezers (240mm)
• Even 4-patterns can set up program of 16-steps.
• Possible to use it to heat treatment, caloric test, etc., because it has PID control which high temperature control accuracy.
• At the time of abnormalities in temperature, burnout function which builds in safety circuit which intercepts heater and detects abnormalities in sensor is also equipped.
• Although it is lightweight and compact, inside of furnace is designed widely.
• Setup of temperature gradient is possible.
• Time for temperature rise is shortened by adoption of 4-sides-heater.
• W-series can observe state of sample with window for observation in furnace.

• Material: Stainless Steel (SUS304)
• Mounting rod: f13mm (interval of 100mm)
• Model number: CT-1
• Tray size (mm): 257 x 177
• This mini tray allows to be placed on assembly stand over laboratory table and jungles.
• Possible to use for various ways, such as for glass implements, or for small equipments.

• Temperature settings range (?C): R.T. + 5 to 60
• Inner dimensions (mm): 312 x 220 x 157
• Outer dimensions (mm): 491 x 296 x 291
• Natural convection formula
• Temperature distribution width: 2 ?C (At 37 ?C)
• Sensor: Pt 100O
• Temperature control method: PID control and SSR output
• Temperature setting unit: 1.0 ?C
• Timer function: ON/OFF, ON/OFF, SV timer
• Timer setting range: 1 minute to 99 hours 59 minutes (Per minute)
• Heater capacity: 80W
• Power supply: AC100V 50/60Hz 1A
• Power cord length: 1.5 m (3P plug)
• Safety device: overheating temperature prevention device, overcurrent breaker sensor disconnection alarm
• Exterior: Steel baked paint
• Interior: Aluminium
• Weight: 9.2kg
• Accessories: shelf board x 2 pieces

• Model number: SS-HK50
• For 50Hz
• Amplitude: Approximately 70 mm
• Frequency: Approximately 60 times/min
• Number of knocks: Approximately 120 times/min
• Angle of slant tapping sieve: Approximately 20 degrees
• Applicable sieve: f200 x depth 60mm (up to 2 stages)
• Safety device: Earth leakage circuit breaker
• Power supply: 100VAC 3P plug (with 2Pconversion plug)
• Material: Steel plate baking coating
• Weight: 28kg
• Main unit size: 570 x 385 x 492mm
• Comply with JIS
• *Shaking is not performed when inclined. *Sieve is not included in the package. *Please check available products for the sieve, Before placing an order.
• These products conform to test methods specified in JIS K 0069.
• These products can change over between shaking and beating, and perform both shaking and beating at the same time during horizontal shaking.
• Sieve frame incorporates 90-degrees rotation mechanism(manual).
• These products can perform continuous operation and timer operation.

• Model number: SS-HK60
• For 60Hz
• Amplitude: Approximately 70 mm
• Frequency: Approximately 60 times/min
• Number of knocks: Approximately 120 times/min
• Angle of slant tapping sieve: Approximately 20 degrees
• Applicable sieve: f200 x depth 60mm (up to 2 stages)
• Safety device: Earth leakage circuit breaker
• Power supply: 100VAC 3P plug (with 2Pconversion plug)
• Material: Steel plate baking coating
• Weight: 28kg
• Main unit size: 570 x 385 x 492mm
• Comply with JIS
• *Shaking is not performed when inclined. *Sieve is not included in the package. *Please check available products for the sieve, Before placing an order.
• These products conform to test methods specified in JIS K 0069.
• These products can change over between shaking and beating, and perform both shaking and beating at the same time during horizontal shaking.
• Sieve frame incorporates 90-degrees rotation mechanism(manual).
• These products can perform continuous operation and timer operation.

• Size (mm): 480 x 313 x 590 (when 45? angle)
• Weight (kg): 9.4
• Pelletization method: Snowman method due to rotation (left rotation)
• Rotation speed: 20 - 112rpm
• Timer: 0 - 9 hours 59 minutes (1 minutes units)
• Material: Body/SPCC (steel plate) white leather tone coating, Pelletization container/stainless steel (SUS304)
• Safety device: Overcurrent protection, glass tube fuse 0.5A
• Pelletization container inner dimensions: f300 x 120mm
• Obliquing angle: 90? (horizontal to vertical)
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Plug shape: 3P with ground pin (with conversion adapter)
• Processable amount: 1kg (when 45? angle)
• Motor: 10W
• Model number: PZ-02R
•
• Angle, rotation, and time setting is the rotation granulator of freely pan dia. 240*mm*.
• Useful in small amount of granulated sample making.
•
• It is granulator of capacity in, up pan diameter and rotation torque peripheral speed of pan granulator DPZ-01R.
• Rotation speed timer is possible precise setting in digital.
•
• It is medium-capacity pan granulator type equipped with a drying function to PZ-02R.
• Even if too hydrolysis during granulation can be water-reducing in the dry.
• It is double outside with plate to eliminate the touch of a high temperature.

• Material: Body, cover/stainless steel (SUS304), Packing/Silicone rubber,
• Central connection size: 24/25
• Conform stirring seal size: 32/24
• Valve mounting hole: G1/4 (3 places)
• Plate thickness: 1.5mm
• Usage range: From 0.14kPa to atmospheric pressure
• Accessories: Clamp for sealing
• Model number: MRC-01
• Capacity (L): 2
• Outer dimension (mm): f180 x 187
• Inner dimension (mm): f140 x 160
• *Fitting, valve, vacuum gauge are not included in the package.
• Enable to stir or mix by agitator as base to mount agitator sealing is equipped.
• Use for heating and blending is also available in combination with hot plate stirrer.

• Size (mm): 160 x 200 x 215
• Material : Stainless steel SUS304
• Suitable size: up to 200mm
• Autoclavable