AS ONE Corporation

• Model number: ISK8700II
• Measurement accuracy: -20? to +100?/+/- 2?, +101 to +315?/+/- 2%rdg (condition measurement environment temperature 23 +/- 5?, emissivity 0.95 at the time of blackbody furnace calibration)
• Emissivity: 0.95 fixed
• Distance factor: D: S• 8: 1
• Detecting element: Thermopile
• Response time: 0.5 seconds
• Power: 9V dry cell 6F22 (006P) (included for test)
• With backlight, hold function *Distance of body and measurement target is 400mm, Areas that can be measured is diameter 50mm circle.
• Size: 41.5 x 160 x 65mm
• Weight: Approx 140g
• Accessories: Cap (with strap), leather case, vinyl cover
• Measurement range: -20 to +315?
• Resolution: 1?
• With laser marker
• It is with laser marker which measures measuring point certainly.
• Skin temperature can be measured quickly.
• It hold measured temperature directions value automatically for approx.5 seconds(fixation).

• Model number: HM-M1
• Material: Agate
• Size: f34 x 73mm
• Weight: 140g
• A little (1*g* grade) shock pulverization can be performed by gesture.
• The up-and-down motion of the cylinder stick in a pipe grinds.
• Grind with KBr powder and it is suitable for an infrared spectroscopic analysis.
• HM-A1 is Mill made from the alumina of 96% of purity, and fine pulverization is efficiently possible for it in a short time.

• Model number: for 1 pc
• Size (mm): 290 x 557 x 780
• Material: Pipe/PVC (vinyl chloride resin) coating, Platform/PVC (vinyl chloride resin)
• Caster: f50mm made of nylon (with rear stopper x 2)
• Applicable tank capacity: 20L (175 x 350 x 408 equivalent product)
• *Not suitable for collecting organic solvent.
• *A plastic container is not included.
• These wagons can carry plastic tank, cans, pails, which were collected experimental waste liquid smoothly, and excellent maneuverability performance.
• Has excellent acid resistance.

• Model number: for 2 pcs
• Size (mm): 460 x 557 x 780
• Material: Pipe/PVC (vinyl chloride resin) coating, Platform/PVC (vinyl chloride resin)
• Caster: f50mm made of nylon (with rear stopper x 2)
• Applicable tank capacity: 20L (175 x 350 x 408 equivalent product)
• *Not suitable for collecting organic solvent.
• *A plastic container is not included.
• These wagons can carry plastic tank, cans, pails, which were collected experimental waste liquid smoothly, and excellent maneuverability performance.
• Has excellent acid resistance.

• Material: Pipe/PVC (vinyl chloride resin) coating, Platform/PVC (vinyl chloride resin)
• Caster: f50mm made of nylon (with rear stopper x 2)
• Applicable tank capacity: 18-liter can/18L (238 x 238 x 349mm equivalent product)
• Size (mm): 320 x 485 x 780
• *Not suitable for collecting organic solvent. *Plastic container, 18-liter can, pail are not included.
• Model number: 18-liter can for 1 pc
• These wagons can carry plastic tank, cans, pails, which were collected experimental waste liquid smoothly, and excellent maneuverability performance.
• Has excellent acid resistance.

• Material: Pipe/PVC (vinyl chloride resin) coating, Platform/PVC (vinyl chloride resin)
• Caster: f50mm made of nylon (with rear stopper x 2)
• Applicable tank capacity: 18-liter can/18L (238 x 238 x 349mm equivalent product)
• Size (mm): 570 x 485 x 780
• *Not suitable for collecting organic solvent. *Plastic container, 18-liter can, pail are not included.
• Model number: 18-liter can for 2 pcs
• These wagons can carry plastic tank, cans, pails, which were collected experimental waste liquid smoothly, and excellent maneuverability performance.
• Has excellent acid resistance.

• Material: Pipe/PVC (vinyl chloride resin) coating, Platform/PVC (vinyl chloride resin)
• Caster: f50mm made of nylon (with rear stopper x 2)
• Applicable tank capacity: Pail/20L (f286 x 360mm equivalent product)
• Size (mm): 370 x 485 x 780
• *Not suitable for collecting organic solvent. *Plastic container, 18-liter can, pail are not included.
• Model number: Pail for 1 pc
• These wagons can carry plastic tank, cans, pails, which were collected experimental waste liquid smoothly, and excellent maneuverability performance.
• Has excellent acid resistance.

• Material: Pipe/PVC (vinyl chloride resin) coating, Platform/PVC (vinyl chloride resin)
• Caster: f50mm made of nylon (with rear stopper x 2)
• Applicable tank capacity: Pail/20L (f286 x 360mm equivalent product)
• Size (mm): 670 x 485 x 780
• *Not suitable for collecting organic solvent. *Plastic container, 18-liter can, pail are not included.
• Model number: Pail for 2 pcs
• These wagons can carry plastic tank, cans, pails, which were collected experimental waste liquid smoothly, and excellent maneuverability performance.
• Has excellent acid resistance.

• Loading cylinder diameter, number: f100 - 170mm, 3 cylinders
• Loading cylinder height: 750 - 1000mm
• Loading weight: 80kg
• Caster: f100mm x 2 cylinders
• Caster material: Urethane
• Support bracket: Guard chain, hook type
• Model number: 10-3 type
• Size (mm): 595 x 514 x 980
• Weight (kg): 20
• Gas cylinder can be carried easily, used as stand when in use, and can be stored as it is.
• 50-2 type is designed with safety using movement of center-of-gravity position of loading cylinder.

• The diameter and number of cylinders are f 200 to 280 mm 2 pieces
• Load cylinder height: 1000 to 1400 mm
• Weight: 150 kg
• caster: f 125 mm x 2 pieces f 75 mm x 2 pieces
• Caster material: urethane
• Support metal bracket: Guard chain hook system
• Type number: 50-2
• Size (mm): 645 x 750 x 1190
• Weight (kg): 28.2
• Gas cylinder can be carried easily, used as stand when in use, and can be stored as it is.
• 50-2 type is designed with safety using movement of center-of-gravity position of loading cylinder.

• Standard specification, gas replacement
• Material: Body/PMMA (acrylic), Frame/aluminum
• Door: with draw latch
• Weight: 5.5kg
• Valve mounting screw: Rc1/4
• Outer dimensions: 400 x 317 x 338mm
• Inner dimension: 370 x 260 x 272mm
• Model number: Standard PL
• It is portable desiccator as carrying case.
• Auto dry type, dehumidification unit which uses solid polymer electrolyte film, electrolyzes the humidity in warehouse directly and removes it.
• Gas Replacement type has 2 valves mouting screws (gas replacement holes) for various accessories (sold separately).
• Static Electricity(SE) type uses conductive PVC.

• Standard specification, gas replacement
• Material: Body/PMMA (acrylic), Frame/aluminum
• Door: with draw latch
• Weight: 5.6kg
• Shelf board: Size/270 x 257mm, Material/styrol, withstand load/about 2kg/stage
• Valve mounting screw: Rc1/4
• Outer dimensions: 302 x 317 x 436mm
• Inner dimension: 272 x 260 x 370mm
• Accessories: Shelf board x 1
• Model number: Standard PL
• It is portable desiccator as carrying case.
• Auto dry type, dehumidification unit which uses solid polymer electrolyte film, electrolyzes the humidity in warehouse directly and removes it.
• Gas Replacement type has 2 valves mouting screws (gas replacement holes) for various accessories (sold separately).
• Static Electricity(SE) type uses conductive PVC.

• Standard specification, auto dry
• Material: Body/PMMA (acrylic), Frame/aluminum
• Door: with draw latch
• Weight: 5.8kg
• Dehumidification system: Using solid high polymer electrolyte membrane, H2O electrolytic discharge
• Humidity control range: To 25% (varies depending on the surrounding environment. )
• Dehumidifying element area: 30 x 30mm
• Power supply: AC100-240V 50/60Hz
• Power consumption: 3W
• Power cord length: Approximately 1.8m (2P plug)
• Outer dimensions: 432 x 317 x 338mm
• Inner dimension: 370 x 260 x 272mm
• Model number: Auto dry PL
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• It is portable desiccator as carrying case.
• Auto dry type, dehumidification unit which uses solid polymer electrolyte film, electrolyzes the humidity in warehouse directly and removes it.
• Gas Replacement type has 2 valves mouting screws (gas replacement holes) for various accessories (sold separately).
• Static Electricity(SE) type uses conductive PVC.

• Standard specification, auto dry
• Material: Body/PMMA (acrylic), Frame/aluminum
• Door: with draw latch
• Weight: 5.9kg
• Shelf board: Size/270 x 257mm, Material/styrol, withstand load/about 2kg/stage
• Dehumidification system: Using solid high polymer electrolyte membrane, H2O electrolytic discharge
• Humidity control range: To 25% (varies depending on the surrounding environment. )
• Dehumidifying element area: 30 x 30mm
• Power supply: AC100-240V 50/60Hz
• Power consumption: 3W
• Power cord length: Approximately 1.8m (2P plug)
• Outer dimensions: 334 x 317 x 436mm
• Inner dimension: 272 x 260 x 370mm
• Accessories: Shelf board x 1
• Model number: Auto dry PH
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• It is portable desiccator as carrying case.
• Auto dry type, dehumidification unit which uses solid polymer electrolyte film, electrolyzes the humidity in warehouse directly and removes it.
• Gas Replacement type has 2 valves mouting screws (gas replacement holes) for various accessories (sold separately).
• Static Electricity(SE) type uses conductive PVC.

• Material: Main body / stainless steel (SUS304), packing / Silicone rubber
• The upper lid open and close draw latch. Thermometer has a seated seat
• Incoming vacuum: 0.1 MPa (-750 Torr)
• Temperature range: 70 ? C or less (R.T.)
• Accessories: vacuum gauge ? 1 piece, step drill joint with cock (1/4 inch) x 2 pieces
• Model number: SSK-01
• Size (mm): 160 x 120
• Capacity: approx. 2L
• Accessories are fully provided so that decompression processing can be performed immediately.
• Flat bottom makes it stable.

• Model number: SCB-S
• external dimension (mm): 115 x 85
• inner size (mm): 106 x 66
• Material: stainless steel (SUS304)
• * For a high power stirrer, see 1-4136-01.
• Excellent in keeping cool and retaining warmth with vacuum thermal insulating structure.
• Hard to be damaged by shock and can be used safely.
• Liquid in bath can be stirred with magnet stirrer.

• Model number: SCB-L
• external dimension (mm): 147 x 110
• inner size (mm): 135 x 90
• Material: stainless steel (SUS304)
• * For a high power stirrer, see 1-4136-01.
• Excellent in keeping cool and retaining warmth with vacuum thermal insulating structure.
• Hard to be damaged by shock and can be used safely.
• Liquid in bath can be stirred with magnet stirrer.

• Model number: EC-1200NP
• Highest temperature: 300 ?
• Plate size: 400 x 300mm
• Plate material: Aluminum
• Temperature control system: PID control with auto-tuning function
• Heater capacity: 900W
• Withstand load: Approx 10kg
• Power supply: AC100 V50/60Hz
• Power cord length: 2m (2P plug)
• Time allowed for continuous use: 48 hours (at the time of 250?)
• Variable temperature-gradient type
• It is a programmed control hot plate which can memorize 4 kinds of programs of max.16 steps.
• PID temperature control and temperature control stabilized with the SSR output are possible.

• Material: Stainless steel (SUS304)
• Mounting rod: f8 x 200mm
• Model number: 5522
• Glass trap holder

• Model number: 100
• Size (mm): 300 x 100 x 50
• Adaptation size (fmm): 55
• Material: PVC (vinyl chloride resin)
• Quantity: 1 box (containing 6 pcs)
• Cup holder only for disposable cup.
• It is convenient when carrying or comparing.