AS ONE Corporation
Disposable Cup Holder 6 Pcs
AS ONE Corporation
• Model number: 200
• Size (mm): 330 x 100 x 50
• Adaptation size (fmm): 65
• Material: PVC (vinyl chloride resin)
• Quantity: 1 box (containing 6 pcs)
• Cup holder only for disposable cup.
• It is convenient when carrying or comparing.
$0
Disposable Cup Holder 6 Pcs
AS ONE Corporation
• Model number: 250
• Size (mm): 300 x 100 x 50
• adaptive size (f mm): 77
• material: PVC (vinyl chloride Plastic)
• Quantity: 1 box (6 pieces)
• Cup holder only for disposable cup.
• It is convenient when carrying or comparing.
$0
Disposable Cup Holder 6 Pieces
AS ONE Corporation
• Size (mm): 280 x 120 x 70
• Applicable size (fmm): 95
• Material: PVC
• Quantity : 1 box (6 pieces)
• *Special order is also available. Please contact us.
$0
Steel Wagon
AS ONE Corporation
• Size (mm): 500 x 500 x 700
• Material: Steel
• Caster: f65mm rubber caster (front caster with stopper x 2)
• Uniform vertical load tolerance: about 120kg
$0
Steel Wagon
AS ONE Corporation
• Size (mm): 600 x 600 x 700
• Material: Steel
• Caster: f65mm swivel rubber caster (front caster with stopper x 2)
• Uniform vertical load tolerance: about 120kg
$0
Steel Wagon
AS ONE Corporation
• Size (mm): 700 x 700 x 700
• Material: Steel
• Caster: f65mm swivel rubber caster (front caster with stopper x 2)
• Uniform vertical load tolerance: about 120kg
$0
Non-Adhesive Sheet for Hot Plate 300 x 400mm 5 Pieces
AS ONE Corporation
• Material: Fluorine resin impregnated glass fiber
• Allowable temperature limit: 250?
• Thickness: 0.075mm
• Size: 300 x 400mm
• Quantity: 1 bag (5 sheets)
• Covering the hot plate surface and prevents the bad debt of top plate and dirt.
• Excellent in durability and chemical resistance.
• Usable for food heating.(Food Sanitation Standards Showa era 34 Ministry of Health and Welfare notice No. 307)
$0
Non-Adhesive Sheet for Hot Plate 180 x 180mm 5 Pieces
AS ONE Corporation
• Material: Fluorine resin impregnated glass fiber
• Allowable temperature limit: 250?
• Thickness: 0.075mm
• Size: 180 x 180mm
• Quantity: 1 bag (5 sheets)
• Covering the hot plate surface and prevents the bad debt of top plate and dirt.
• Excellent in durability and chemical resistance.
• Usable for food heating.(Food Sanitation Standards Showa era 34 Ministry of Health and Welfare notice No. 307)
$0
Smart Water Bath Tank Volume 4.5L
AS ONE Corporation
• temperature settings range: R.T. + 5 to 80 ? C
• tank inner size: 315 x 213 x 86 mm
• water tank capacity: Approximately 4.5 L
• Sensor: K class thermocouple
• Temperature control system: PID control and SSR output
• Heater Type: Mica heater
• Heater capacity: 600 W
• material: Main / stainless baked paint, water tank / stainless (SUS304)
• Safety device: Temperature control base side alarm (Heater disconnection / sensor disconnection), temperature overrise prevention switch, overcurrent breaker
• power supply: 100 V 50 / 60Hz 6A
• power cord: 1.4 m (3P Plug)
• Weight: About 5.0 kg
• external dimension: 371 x 335 x 131 mm
• Model Number: TB-2 N
• Excellent in durability with stainless paint finish.
• Inside tank, there is no the projection of heater sensor etc.
• The PID control with high temperature control accuracy is adopted.
• Since there is no joint in a tank and R processing is done, it is easy to clean, and there are no worries about leakage.
$0
Smart Water Bath for Lid
AS ONE Corporation
• Material: PC (polycarbonate)
• External dimensions: 227 x 172 x 113mm
• Chamber size 227 x 172 x 113mm
• Model number: Lid for TB-1
• Excellent in durability with stainless paint finish.
• Inside tank, there is no the projection of heater sensor etc.
• The PID control with high temperature control accuracy is adopted.
• Since there is no joint in a tank and R processing is done, it is easy to clean, and there are no worries about leakage.
$0
Smart Water Bath for Lid
AS ONE Corporation
• Material: PC (polycarbonate)
• External dimensions: 328 x 225 x 113mm
• Chamber size 328 x 225 x 113mm
• Model number: Lid for TB-2
• Excellent in durability with stainless paint finish.
• Inside tank, there is no the projection of heater sensor etc.
• The PID control with high temperature control accuracy is adopted.
• Since there is no joint in a tank and R processing is done, it is easy to clean, and there are no worries about leakage.
$0
Compact Cool Incubator ICI1
AS ONE Corporation
• Model number: ICI-1
• Body dimensions: 270 x 210 x 260mm
• Internal dimensions: 220 x 160 x 130mm
• Net plate dimensions: 200 x 145mm
• Temperature settings range: +12 - 50?
• Ambient temperature range: 12 - 26?
• Temperature distribution accuracy: +/- 1.5?
• Forced convection system
• Temperature control system: PID control
• Temperature sensor: K class thermocouple
• Material: Body/ABS, Transparent cover/PS (Polystyrene), Net plate/stainless steel (SUS304)
• Body weight: 3.2kg
• Power supply: 100VAC 50/60Hz
• Power consumption: 40W
• Power cord length: 2m (2P plug)
• Accessories: Net shelf 1 sheet
• Cool incubator using peltier element.
• Forced convection system which circulates through the air inwarehouse by small fan.
• Adopted PID control with high temperature control accuracy.
$0
Brush Dry Stand
AS ONE Corporation
• Model number: BS-S
• Size (mm): 300 x 250 x 605
• Material: Stainless steel (SUS304)
• Autoclavable
• This open type brush holder stand make drying and storing brushes easy.
$0
Vacuum Desiccator (UV Blocker Type) 420 x 397 x 491mm
AS ONE Corporation
• Material: Body, shelf board/PC (polycarbonate), Silica gel plate/PP (polypropylene), Packing/Silicone rubber,
• Allowable vacuum degree: 1Torr (approx 133Pa)
• Withstand load (body): 100kg
• Withstand load (shelf): 5kg
• Vacuum valve diameter: f9mm
• Shelf board mounting spacing: 64.2mm
• Model number: VDC-41U
• UV cut type
• Outer dimension (mm): 420 x 397 x 491
• Inner dimension (mm): 280 x 310 x 395
• Weight (kg): 12.2
• Accessories: Silica gel plate x 1 plate, Plug x 2, Vacuum valve x 1 pieces, Vacuum gauge x 1 piece, Shelf board x 3
• It integrates high strength and high air-tightness.
• Since seamless silicon packing is attached to the door, it excels air-tightness and grease is not required.
• 1 valve can be attached to both left and right side.
• Stackable it on another.
•
• Possible to cut UV 400n*m* or less.
$0
Digital Desktop Temperature Controller 0 - 399?
AS ONE Corporation
• Model number: TJA-450K
• Settings range: 0 - 399?
• Sensor type: K class thermocouple
• Temperature control system: ON/OFF control (2 positions type)
• Temperature display precision: +/-1% (FS) +/- 1 digit or 3? whichever is larger
• Temperature setting system: 3 digits digital switch settings
• Output terminal: 3P outlet, M4 screw terminal,
• Connection capacity: MAX 15A (resistance load)
• Power supply: 100VAC 50/60Hz
• Size: 135 x 150 x 94mm
• Attached sensor: K class thermocouple f3.2 x 200mm (stainless steel sheath (SUS304)) cable length 1.9m
• Equipped with 2 output terminals of 3P receptacle and terminal stop.
• TJA-450 series temperature setting can be done easily and precisely by just pressing the DIP switch.
• TJA-550 series temperature control system allows highly accurate temperature control with PID control(auto tuning equipment).
• TJA-550 series temperature display adopts PV/SV two-level display which shows measured values and set values at a glance, preventing setting mistakes and so on.
$0
Digital Desktop Temperature Controller 0.0 - 99.9?
AS ONE Corporation
• Model number: TJA-450P
• Settings range: 0.0 - 99.9?
• Sensor type: Pt100O
• Temperature control system: ON/OFF control (2 positions type)
• Temperature display precision: +/-1% (FS) +/- 1 digit or 3? whichever is larger
• Temperature setting system: 3 digits digital switch settings
• Output terminal: 3P outlet, M4 screw terminal
• Connection capacity: MAX 15A (resistance load)
• Power supply: 100VAC 50/60Hz
• Size: 135 x 150 x 94mm
• Attached sensor: Pt100O f4 x 200mm (stainless steel sheath (SUS304)) cable length: 1.9m
• Equipped with 2 output terminals of 3P receptacle and terminal stop.
• TJA-450 series temperature setting can be done easily and precisely by just pressing the DIP switch.
• TJA-550 series temperature control system allows highly accurate temperature control with PID control(auto tuning equipment).
• TJA-550 series temperature display adopts PV/SV two-level display which shows measured values and set values at a glance, preventing setting mistakes and so on.
$0
Digital High Accuracy Temperature Controller 0 - 500?
AS ONE Corporation
• Model number: TJA-550K
• Settings range: 0 - 500?
• Sensor type: K class thermocouple
• Temperature control system: PID control (auto-tuning)
• Temperature display precision: SV +/-3% or 3?, whichever is larger
• Temperature setting system: Sheet key touch system
• Output terminal: 3P outlet, M4 screw terminal
• Connection capacity: MAX 10A (resistance load)
• Power supply: 100VAC 50/60Hz
• Size: 135 x 150 x 94mm
• Attached sensor: K class thermocouple f3.2 x 200mm (stainless steel sheath (SUS304)) cable length 1.9m
• Equipped with 2 output terminals of 3P receptacle and terminal stop.
• TJA-450 series temperature setting can be done easily and precisely by just pressing the DIP switch.
• TJA-550 series temperature control system allows highly accurate temperature control with PID control(auto tuning equipment).
• TJA-550 series temperature display adopts PV/SV two-level display which shows measured values and set values at a glance, preventing setting mistakes and so on.
$0
Digital High Accuracy Temperature Controller 0.0 - 200.0?
AS ONE Corporation
• Model number: TJA-550P
• Settings range: 0.0 - 200.0?
• Sensor type: Pt100O
• Temperature control system: PID control (auto-tuning)
• Temperature display precision: SV +/-3% or 3?, whichever is larger
• Temperature setting system: Sheet key touch system
• Output terminal: 3P outlet, M4 screw terminal
• Connection capacity: MAX 10A (resistance load)
• Power supply: 100VAC 50/60Hz
• Size: 135 x 150 x 94mm
• Attached sensor: Pt100O f4 x 200mm (stainless steel sheath (SUS304)) cable length: 1.9m
• Equipped with 2 output terminals of 3P receptacle and terminal stop.
• TJA-450 series temperature setting can be done easily and precisely by just pressing the DIP switch.
• TJA-550 series temperature control system allows highly accurate temperature control with PID control(auto tuning equipment).
• TJA-550 series temperature display adopts PV/SV two-level display which shows measured values and set values at a glance, preventing setting mistakes and so on.
$0
Overtemperature Control Device
AS ONE Corporation
• Model number: TL-400
• Settings range: 0 - 400?
• Minimum display unit: 1?
• Temperature display precision: +/-0.3% (FS) +/- 1 digit or 3?, whichever is larger
• Temperature setting system: Sheet key touch system, PV/SV digital 2 stages display
• Alarm description: When rising more than settings temperature, PV display flashes and internal relay is OFF (reset returns by reclosing body power switch)
• Output terminal: 3P outlet, M4 screw terminal
• Connection capacity: MAX 15A (resistance load)
• Power supply: 100VAC 50/60Hz
• Main unit size: 135 x 110 x 82mm
• Accessories: K class thermocouple (including in the body) round terminal specification (cable length 1.9m)
• If temperature becomes high from preset temperature, even if power supply will be cut automatically and temperature will fall from preset value, power supply does not return.
• Max. of 1500W (at the time of resistance load) of load capacity is connectable.
• Various K thermo couples (terminal specification) of option can also be used.
$0
Dry Board Table Top Type
AS ONE Corporation
• Model number: N type
• Size (mm): 450 x 140 x 251
• Material: Body/PVC (vinyl chloride resin), Hanger/ABS resin
• Hanger rail 1 piece
• Vial bottle hanger: 15 pieces
• Board size: 444 x 250mm
• Accessories: Hanger x 4 pcs,
• hanger for drying and holder for bottles are supplied for N type.
• W type can be used both sides for drying, and possible to used also as wall tapestry type if tray is taken off.
$0