Rack

• For round bottom flasks, enhancing laboratory safety
• White
• Durable for temperatures up to 121 °C
• Dia 160mm

• Consists of a baseplate and vertical rod accommodating a rotary unit composed of two end-plates and a spacer-tube
• Upper end-plate has 94 openings of various diameters
• Lower end-plate has grooves and drainage holes
• He

• Top and middle tiers have 16mm dia holes

• Bottom tier holes taper from 16mm to 6mm

• PP rack is steam autoclavable at 121°C

• Size: 213 x 114 x 222mm high

• Store 50 pipettes in a vertical 5 x 10 pattern

• Hole diameter in the top and middle tiers: 7.9mm

• Distance between top and bottom plates: 105mm

• Chemical and corrosion resistant

• Autoclavable at 121°C

• Dimensions: 149mm x 213mm x 251mm high

•

• 3 tier

• Working temperatures of -20 to +90°C

• Autoclavable at 121°C

• 190 (L) x 60 (W) x 80mm (Ht)

• Extra tough to resist most acids, solvents and heat

• Molded in a single, continuous piece - no assembly required and no detachable pieces

• Made of Delrin® fiberglass-reinforced polyoxymethylene (POM)

• Molded index c

• Molded in a single, continuous piece - no assembly required and no detachable pieces

• Made of polypropylene (PP)

• Molded index coordinates and flat labeling areas keep samples organized

• NOT recommended for the autoclav

• 3 tier

• Working temperatures of -20 to +90 deg C

• Autoclavable at 121 deg C

• 375 (L) x 65 (W) x 85mm (Ht)

• Steam autoclavable at 121 deg C

• Size: 178mm x 178mm high

• Space-saving vertical pipette storage for 28 pipettes

• Support 10 pipettes up to 14mm in dia and 18 pipettes up to 11mm in dia

• Lower plate has 4mm di

• Accepts 44 pipettes of up to 15mm OD

• White color

• Very stable

• Support unit rotates on rod for easy pipette selection

• Bottom tray has small pilot holes for drainage

• Rod supplied with separate bus

• Every rack comes with square holes, with three decks, a slotted grid bottom and reinforced edges for extra strength

• Epoxy-coated racks are resistant to organic solvents, salts, weak acids and weak alkalis

• Fully functional betwe

• Made of autoclavable polypropylene

• Will sink in a water bath and maintain their stability even in agitated water

• Features end plates for labeling; numbered and lettered rows for tube identification

• Interlocking feet

• For high-visibility, this HDPE rack is end-supported by 2 columns

• Top plate has 25mm diameter holes; base has corresponding hemispherical wells

• Includes 6 vertical pins for tube drying

• Easy snap together assembly

• Molded of autoclavable polypropylene

• Autoclavable at 121°C

• Can sink in a water bath and remain stable even in agitated water

• Each rack features end plates for labeling as well as numbered and lettered

• Molded of autoclavable polypropylene

• Autoclavable at 121°C

• Can sink in a water bath and remain stable even in agitated water

• Each rack features end plates for labeling as well as numbered and lettered

• Made of polypropylene (PP)
• Steam sterilizable at 121? C
• Racks hold cells with minimal physical contact and virtually eliminates risk of scratching and damage
• Holds 12 cuvettes of 10mm light path

• Made of polypropylene (PP)
• Steam autoclavable at 121°C
• Perfect for dipping, transport, and storage of test tubes
• Baskets available with lids
• Invert filled basket to drain test tubes

• Molded of autoclavable polypropylene
• Autoclavable at 121°C
• Can sink in a water bath and remain stable even in agitated water
• Each rack features end plates for labeling as well as numbered and lettered rows for tu

• Molded of autoclavable polypropylene
• Autoclavable at 121°C
• Can sink in a water bath and remain stable even in agitated water
• Each rack features end plates for labeling as well as numbered and lettered rows for tu

• Molded of autoclavable polypropylene
• Autoclavable at 121°C
• Can sink in a water bath and remain stable even in agitated water
• Each rack features end plates for labeling as well as numbered and lettered rows for tu