Plastic Syringe

• Housing material: PP (polypropylene)
• Shape: inlet / main arc lock, exit / loose slip
• Heat resistance: 45 ? C
• Effective filtration area: 0.65 cm2
• Amount remaining: < 25 ?L
• Pressure: 690 kPa
• Quantity: 100 pieces
• Model number: RJN 1345 NH
• Membrane material: Nylon
• pore size (?m): 0.45
• Diameter (f mm): 13
• It is high pressure resistance types without worry about burst and leak.

• Housing material: PP (Polypropylene)
• Shape: Inlet/female luer lock, Outlet/male luer slip
• Allowable temperature limit: 45?
• Effective filtering area: 4.4cm2
• Residual liquid quantity: <100?L
• Pressure resistance: 1000kPa
• Quantity: 100 pcs
• Model number: RJN3245NH
• Membrane material: Nylon
• Pore diameter (?m): 0.45
• Diameter (fmm): 32
• It is high pressure resistance types without worry about burst and leak.

• Housing material: PP (polypropylene)
• Shape: inlet / main arc lock, exit / loose slip
• Heat resistance: 45 ? C
• Effective filtration area: 0.65 cm2
• Amount remaining: < 25 ?L
• Pressure: 690 kPa
• Quantity: 100 pieces
• Model number: RJP 1322 NH
• Membrane material: PES (polyether sulfone)
• pore size (?m): 0.22
• Diameter (f mm): 13
• It is high pressure resistance types without worry about burst and leak.

• Housing material: PP (Polypropylene)
• Shape: Inlet/female luer lock, Outlet/male luer slip
• Allowable temperature limit: 45?
• Effective filtering area: 4.4cm2
• Residual liquid quantity: <100?L
• Pressure resistance: 1000kPa
• Quantity: 100 pcs
• Model number: RJP3222NH
• Membrane material: PES (polyethersulfone)
• Pore diameter (?m): 0.22
• Diameter (fmm): 32
• It is high pressure resistance types without worry about burst and leak.

• Housing material: PP (polypropylene)
• Shape: inlet / main arc lock, exit / loose slip
• Heat resistance: 45 ? C
• Effective filtration area: 0.65 cm2
• Amount remaining: < 25 ?L
• Pressure: 690 kPa
• Quantity: 100 pieces
• Model number: RJP 1345 NH
• Membrane material: PES (polyether sulfone)
• pore size (?m): 0.45
• Diameter (f mm): 13
• It is high pressure resistance types without worry about burst and leak.

• Housing material: PP (Polypropylene)
• Shape: Inlet/female luer lock, Outlet/male luer slip
• Allowable temperature limit: 45?
• Effective filtering area: 4.4cm2
• Residual liquid quantity: <100?L
• Pressure resistance: 1000kPa
• Quantity: 100 pcs
• Model number: RJP3245NH
• Membrane material: PES (polyethersulfone)
• Pore diameter (?m): 0.45
• Diameter (fmm): 32
• It is high pressure resistance types without worry about burst and leak.

• Material: Membrane/GF (glass fiber), Housing/PP (polypropylene)
• Effective filtering area: 4.15cm2
• Model number: SYGF0605MNXX104
• Pore diameter (?m): 1
• Diameter (fmm): 25
• Quantity: 1 box (containing 100 pcs)
• Glass fiber
• Suitable for filtration of high pollution.?Specification
• Material:Membrane/GF(Fiberglass)?Housing/PP(Polypropylene)
• Effective Filtration Area:SYGF0305/0.80*cm2*?SYGF0605/4.15*cm2*

• Model number: MR-1
• Specification: Drive part
• Conform syringe: 10?L - 5mL
• Size (mm): 171 x 45 x 83
• Motor: Small stepping motor
• Syringe number of hanging: 1 piece
• Weight: 0.7kg
• Applicable syringe capacity: 10?L - 5mL
• *Syringe is not included in the package.
• *Please use a set of controller unit and drive unit.
• *Capacity scale is set for 60mm syringe with the speed scale, So you need to do scale conversion with other syringes.
• Place only drive unit in chamber or similar part to remotely control from outside of pump.
• Flow rate can be easily adjusted simply by turning dial to desired graduation.
• Add remote control cable(sold separately) to operate 2 drive units at the same time.
• MR-1 can be secured to stand.

• Model number: MSPE-1
• Size: 235 x 95 x 85mm
• Mounting syringe number: 1 piece
• Flow rate setting: 0.1 - 100?L/min (1.0mL when using syringe), 16 stages
• Feed speed range: 0.006 - 6mm/min
• Material: Exterior/acrylic denatured high impact PVC (vinyl chloride resin)
• Power supply: 100VAC 50/60Hz
• Used motor: Small stepping motor
• Applicable syringe capacity: 10?L - 10mL
• Weight: 900g
• With injection movement pause function
• *Syringe is not included in the package. *Syringe capacity scale is set for 60mm with feed speed scale, So you need to do scale conversion with other syringes.
• Flowrate setting is easy with dial.

• Model number: MSPE-3
• Size: 235 x 116 x 85mm
• Mounting syringe number: 3 pieces
• Flow rate setting: 0.1 - 100?L/min (1.0mL when using syringe), 16 stages
• Feed speed range: 0.006 - 6mm/min
• Material: Exterior/acrylic denatured high impact PVC (vinyl chloride resin)
• Power supply: 100VAC 50/60Hz
• Used motor: Small stepping motor
• Applicable syringe capacity: 10?L - 10mL
• Weight: 975g
• With injection movement pause function
• *Syringe is not included in the package. *Syringe capacity scale is set for 60mm with feed speed scale, So you need to do scale conversion with other syringes.
• Flowrate setting is easy with dial.

• Model number: SPE-1
• Inhalation, injection type: Injection
• Applicable syringe capacity: 10 - 50mL
• Size: 235 x 105 x 95mm
• Feed speed range: 0.006 - 6mm/min
• Flow rate: 0.07mL/h (10mL syringe) - 240mL/h (50mL syringe)
• Material: Exterior/acrylic denatured high impact PVC (vinyl chloride resin)
• Flow rate setting: Dial setting, 16 stages
• Power supply: 100VAC 50/60Hz
• Used motor: Small stepping motor
• With injection movement pause function
• Weight: 970g
• Accessories: Flow rate setting software
• *Syringe is not included in the package. *Whole discharge may be unable due to shape of syringe.
• Flowrate setting is easy with dial.
• Conversion software for flow rate setting graduation table is attached.

• material: filter / cellulose acetate, housing / PC (polycarbonate)
• Connection port: inlet / main arc lock, exit / loose lock
• Effective filtration area: 5.0 cm2
• Processing volume: < 150 mL
• Amount remaining: < 200 ?L
• Pressure: 6.0 kg / cm2
• Quantity: 1 box (100 pieces)
• Gamma-ray sterilized (individual packaging)
• pore size (?m): 0.22
• Diameter (f mm): 33
• CA
• * You can connect to a louver lock type syringe
• Model Number: 033022SO-SFCA
• Individually sterilized package ready-to-use filter.
• Made of membrane material with low protein absorption.
• High filtration efficiency design with large filtration area enables to perform filtration without strong force.

• material: filter / cellulose acetate, housing / PC (polycarbonate)
• Connection port: inlet / main arc lock, exit / loose lock
• Effective filtration area: 5.0 cm2
• Processing volume: < 150 mL
• Amount remaining: < 200 ?L
• Pressure: 6.0 kg / cm2
• Quantity: 1 box (100 pieces)
• Gamma-ray sterilized (individual packaging)
• pore size (?m): 0.45
• Diameter (f mm): 33
• CA
• * You can connect to a louver lock type syringe
• Model Number: 033045SO-SFCA
• Individually sterilized package ready-to-use filter.
• Made of membrane material with low protein absorption.
• High filtration efficiency design with large filtration area enables to perform filtration without strong force.

• material: Filter / PTFE (Fluorine Plastic), housing / PP (polypropylene)
• Connector: inlet / main arc lock, exit / loose slip
• Residual liquid volume: 6.0 kg / cm2
• autoclave possible (130 ? C)
• no sterilization
• pore size (?m): 0.22
• Diameter (f mm): 4
• Effective filtration area (cm2): 0.125
• Amount of processing (mL): < 1
• Amount of residual liquid (?L): < 5
• Quantity: 1 box (200 pieces)
• Hydrophilicity
• Model Number: 004022NL-SEPTFE
• Suitable for HPLC pretreatment.

• material: Filter / PTFE (Fluorine Plastic), housing / PP (polypropylene)
• Connector: inlet / main arc lock, exit / loose slip
• Residual liquid volume: 6.0 kg / cm2
• autoclave possible (130 ? C)
• no sterilization
• pore size (?m): 0.45
• Diameter (f mm): 4
• Effective filtration area (cm2): 0.125
• Amount of processing (mL): < 1
• Amount of residual liquid (?L): < 5
• Quantity: 1 box (200 pieces)
• Hydrophilicity
• Model Number: 004045NL-SEPTFE
• Suitable for HPLC pretreatment.

• material: Filter / PTFE (Fluorine Plastic), housing / PP (polypropylene)
• Connector: inlet / main arc lock, exit / loose slip
• Residual liquid volume: 6.0 kg / cm2
• autoclave possible (130 ? C)
• no sterilization
• pore size (?m): 0.22
• Diameter (f mm): 13
• Effective filtration area (cm2): 0.92
• Processing volume (mL): < 10
• Residual volume (?L): < 10
• Quantity: 1 box (100 pieces)
• Hydrophilicity
• Model number: 013022NLCU-SEPTFE
• Suitable for HPLC pretreatment.

• material: Filter / PTFE (Fluorine Plastic), housing / PP (polypropylene)
• Connector: inlet / main arc lock, exit / loose slip
• Residual liquid volume: 6.0 kg / cm2
• autoclave possible (130 ? C)
• no sterilization
• pore size (?m): 0.45
• Diameter (f mm): 13
• Effective filtration area (cm2): 0.92
• Processing volume (mL): < 10
• Residual volume (?L): < 10
• Quantity: 1 box (100 pieces)
• Hydrophilicity
• Model number: 013045NLCU-SEPTFE
• Suitable for HPLC pretreatment.

• material: Filter / PTFE (Fluorine Plastic), housing / PP (polypropylene)
• Connector: inlet / main arc lock, exit / loose slip
• Residual liquid volume: 6.0 kg / cm2
• autoclave possible (130 ? C)
• no sterilization
• pore size (?m): 0.22
• Diameter (f mm): 25
• Effective filtration area (cm2): 2.98
• Processing volume (mL): < 100
• Residual volume (?L): < 50
• Quantity: 1 box (100 pieces)
• Hydrophilicity
• Model number: 025022NLCU-SEPTFE
• Suitable for HPLC pretreatment.

• material: Filter / PTFE (Fluorine Plastic), housing / PP (polypropylene)
• Connector: inlet / main arc lock, exit / loose slip
• Residual liquid volume: 6.0 kg / cm2
• autoclave possible (130 ? C)
• no sterilization
• pore size (?m): 0.45
• Diameter (f mm): 25
• Effective filtration area (cm2): 2.98
• Processing volume (mL): < 100
• Residual volume (?L): < 50
• Quantity: 1 box (100 pieces)
• Hydrophilicity
• Model number: 025045NLCU-SEPTFE
• Suitable for HPLC pretreatment.

• Model number: SPDC-1
• Syringe number of hanging: 1 piece
• Size (mm): 234 x 164 x 130
• Weight (kg): Approximately 3.5
• Flow rate setting range: 0.1 - 300mL/h (maximum stroke 110mm)
• Speed range: 0.01 - 17.5mm/min
• Correspond syringe: 10 - 100mL
• Linear force: 9.5kg
• With injection movement pause function (settings changable)
• Safety device: Push block stop function, power failure display
• Power supply: 100VAC 50/60Hz (including AC adapter)
• Power cord length: 1.5m
• High viscosity liquid such as 50,000mP?s CMC can also be pumped.
• Syringe data for those of major manufacturers is already input so that you can easily select the one used.
• Multiple conditions, such as injection amount and time, and amount injected per hour, can be set.
• Setting conditions and cumulative injection amount are displayed.