Rubber Stopper
Instrument Table (Layered Storage Type) 600 x 400 x 796mm
AS ONE Corporation
• Material: Stainless steel (SUS304)
• Caster: f50mm made of rubber (without stopper)
• Foot pipe diameter: f25mm
• Width x depth x height (mm): 600 x 400 x 796
• Spacing between shelves (mm): 445
• Layered storage type
• Model number: NSW-N
• Cart doesn't take place because it can be stack with 3 kinds of dimensions.
• Usable 2 steps at the time of working, bounding and store by bounding lower step.
$0
Earplug (Flange Type)
AS ONE Corporation
• Model number: EP-531
• Quantity: 1 set (2 pieces)
• material: Synthetic rubber
• Quantity entered: 100 pairs
• * Price per set.
• These plugs are flange type and superior in fitting property.
$0
Vacuum Pump Cart
AS ONE Corporation
• Model number: VPC
• Material: Top board/Phenol resin lamination layer board, Frame/SPCC steel tube (AAS resin coating)
• Caster: f65mm made of rubber (with stopper)
• Available space for top board portion/360 x 210mm
• Withstand load: 50kg
• Size: 374 x 224 x 142mm
• It is compact size which needs not space.
$0
Desiccator (For Silica Gel) 600 x 550 x 1700mm
AS ONE Corporation
• Material: Body/steel plate melamine bake coating, Front/glass
• Caster: F100mm hard rubber (with stopper x 2 pieces)
• Weight: 54kg
• Shelf board load capacity: Approximately 40kg/sheet (uniform distribution load)
• Shelf board mounting pitch: 60mm
• Number of attached shelf boards: 3 sheets
• Outer dimensions: 600 x 550 x 1700mm
• Inner dimension: 560 x 515 x 1515mm
• Caster: There
• *Silica gel plate is not included in the package.
• Model number: SPX-3
• Made of teel with silica gel formula.
• Left door adopts latch-type lock on top and bottom and right door adopts general rotary key.
$0
Desiccator (For Silica Gel) 1200 x 550 x 1652mm
AS ONE Corporation
• Material: Body/steel plate melamine bake coating, Front/glass
• Caster: F100mm hard rubber (with stopper x 2 pieces)
• Weight: 90kg
• Shelf board load capacity: Approximately 40kg/sheet (uniform distribution load)
• Shelf board mounting pitch: 60mm
• Number of attached shelf boards: 3 sheets
• Outer dimensions: 1200 x 550 x 1652mm
• Inner dimension: 1160 x 515 x 1515mm
• Caster: There
• *Silica gel plate is not included in the package.
• Model number: SPX-4
• Made of teel with silica gel formula.
• Left door adopts latch-type lock on top and bottom and right door adopts general rotary key.
$0
Researcher Stool Green
AS ONE Corporation
• Model number: TSS-16RL-STCC-GR
• Material: Back, seat surface/mold urethane, PP (polypropylene), upholstered with vinyl leather, antibacterial/antifouling processing, Leg/PP (polypropylene), steel
• Up-and down method: Gas cylinder type
• Seating surface size: 420 x 400mm
• Seat surface height: 475 - 650mm
• Weight: 10.5kg
• Caster: f50mm made of rubber (with seating stopper)
• Color: Green
• Width x depth x height: 510 x 500 x 685 - 860mm
• Brake works effectively with weight of 36*kg* or more and it will be released when away from stool.
$0
Researcher Stool Blue
AS ONE Corporation
• Model number: TSS-16RL-STCC-BL
• Material: Back, seat surface/mold urethane, PP (polypropylene), upholstered with vinyl leather, antibacterial/antifouling processing, Leg/PP (polypropylene), steel
• Up-and down method: Gas cylinder type
• Seating surface size: 420 x 400mm
• Seat surface height: 475 - 650mm
• Weight: 10.5kg
• Caster: f50mm made of rubber (with seating stopper)
• Color: Blue
• Width x depth x height: 510 x 500 x 685 - 860mm
• Brake works effectively with weight of 36*kg* or more and it will be released when away from stool.
$0
Researcher Stool Pink
AS ONE Corporation
• Model number: TSS-16RL-STCC-LWI
• Material: Back, seat surface/mold urethane, PP (polypropylene), upholstered with vinyl leather, antibacterial/antifouling processing, Leg/PP (polypropylene), steel
• Up-and down method: Gas cylinder type
• Seating surface size: 420 x 400mm
• Seat surface height: 475 - 650mm
• Weight: 10.5kg
• Caster: f50mm made of rubber (with seating stopper)
• Color: Pink
• Width x depth x height: 510 x 500 x 685 - 860mm
• Brake works effectively with weight of 36*kg* or more and it will be released when away from stool.
$0
Safety Frame Cart
AS ONE Corporation
• Model number: Body:
• Size (mm): 905 x 582 x 1035
• Material: Frame/steel (acrylic baking coating), Loading platform/plywood, Mat/rubber
• Caster: 150mmf rubber (front swivel, with stopper)
• Withstand load: 200kg
• Loading platform effective area: 675 x 535mm
• *Frame is not included.
• Equipped with large(f150*mm*) casters and capable of climbing over steps even with heavy loads.
• Handle is positioned at height of approx. 950*mm*, that is convenient for operation.
• PE-coated frame, platform rubber mat, and bearing casters ensures silent movement.
$0
Replacement Silicone Rubber O-Ring For Stainless Steel Pot Mill (430mL)
AS ONE Corporation
• Specification: Replacement Silicone Rubber O-ring (430mL)
$0
Replacement Silicone Rubber O-Ring For Stainless Steel Pot Mill (1000mL)
AS ONE Corporation
• Specification: Replacement Silicone Rubber O-ring (1000mL)
$0
Replacement Silicone Rubber O-Ring For Stainless Steel Pot Mill (3000mL)
AS ONE Corporation
• Specification: Replacement Silicone Rubber O-ring (3000mL)
$0
Desiccator
AS ONE Corporation
• Silica gel type
• Material: Body, door/PMMA (acrylic), Door packing/latex sponge + neoprene rubber coating, Drawer/PS (polystyrene)
• Dehumidification system: Silica gel method
• Reaching humidity: 25%RH (with no internal load, depending on the usage environment)
• Internal dimensions of drawers: 113 x 494 x 68mm
• Shelf board interval: 85mm
• Shelf board load capacity: Approx 1.5kg
• Total withstand load: Approx 6kg
• Door specification: Draw latch 3 places
• Rubber foot: 25 x 20mm
• Weight: 9kg
• Size: 270 x 568 x 419mm (*The size excludes projections and dry unit. )
• Accessories: Drawer x 8 pieces, Middle partition plate x 8 sheets, Silica gel plate x 2 plates
• 8 drawers are useful for classification and storage of long or small amounts of samples.
• Transparent body and drawers facilitate confirmation of stored samples.
• Door and snap locks achieve high airtightness.
$0
Desiccator
AS ONE Corporation
• Auto dry type
• Material: Body, door/PMMA (acrylic), Door packing/latex sponge + neoprene rubber coating, Drawer/PS (polystyrene)
• Dehumidification system: H2O electric decomposition discharge (using solid high polymer electrolyte membrane)
• Reaching humidity: 25%RH (with no internal load, depending on the usage environment)
• Internal dimensions of drawers: 113 x 494 x 68mm
• Shelf board interval: 85mm
• Shelf board load capacity: Approx 1.5kg
• Total withstand load: Approx 6kg
• Door specification: Draw latch 3 places
• Rubber foot: 25 x 20mm
• Power supply: AC100-240V 50/60Hz 3W
• Power cord length: 2m (2P plug)
• Weight: 9.5kg
• Model number: OH-PB
• Auto dry type
• Size (mm): 270 x 568 x 419 (*The size excludes projections, dry unit. )
• UT-Lab.
• Accessories: Drawer x 8 pieces, Middle partition plate x 8 sheets, Analog type temperature and humidity meter x 1
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• 8 drawers are useful for classification and storage of long or small amounts of samples.
• Transparent body and drawers facilitate confirmation of stored samples.
• Door and snap locks achieve high airtightness.
$0
Standard Desiccator Rubber Feet Specification
AS ONE Corporation
• Rubber feet specification
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Shelf board/stainless steel (SUS430), Leg/natural rubber
• Shelf board dimensions: 268 x 256 x 10mm
• Shelf board mounting pitch: 100mm (shelf rest position fixed), 4 stages
• Shelf board load capacity: Approximately 5kg/board
• Total withstand load: Approx 10kg
• Door specification: Draw latch type
• Weight: 6.4kg
• Size: 302 x 318 x 559mm
• Accessories: Shelf board x 2 (SUS430), Silica gel plate x 1 (polystyrene)
• Model number: SD-UTG
• Inside of body is highly airtight.
• Select rubber-foot type for installation on desktop or floor surface.Select caster type for installation under lab bench or transportation by each sample.
$0
Standard Desiccator Caster Specification
AS ONE Corporation
• Caster specification
• Material: Body/PMMA (acrylic resin), Frame/aluminum sash, Shelf board/stainless steel (SUS430)
• Shelf board dimensions: 268 x 256 x 10mm
• Shelf board mounting pitch: 100mm (shelf rest position fixed), 4 stages
• Shelf board load capacity: Approximately 5kg/board
• Total withstand load: Approx 10kg
• Door specification: Draw latch type
• Caster: F40mm Nylon made (with stopper)
• Weight: 6.8kg
• Size: 302 x 318 x 600mm
• Accessories: Shelf board x 2 (SUS430), Silica gel plate x 1 (polystyrene), Knob for moving x 1 piece
• Model number: SD-UTK
• Inside of body is highly airtight.
• Select rubber-foot type for installation on desktop or floor surface.Select caster type for installation under lab bench or transportation by each sample.
$0
Auto Dry Desiccator Rubber Feet Specification
AS ONE Corporation
• Auto dry type
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Shelf board/stainless steel (SUS430), Leg/natural rubber
• Dehumidification system: H2O electric decomposition discharge (using solid high polymer electrolyte membrane)
• Reaching humidity: Approximately 15%RH (after 12 hours, with no internal load, depending on the usage environment)
• Shelf board dimensions: 268 x 256 x 10mm
• Shelf board mounting pitch: 100mm (shelf rest position fixed) x 4 stages
• Shelf board load capacity: Approximately 5kg/board
• Total withstand load: Approx 10kg
• Door specification: Draw latch type
• Power supply: AC100V 50/60Hz 4W
• Power cord length: Approximately 2m (2P plug)
• Body weight: 7.2kg
• Accessories: Shelf board x 2 (SUS430)
• Model number: SP-UTG
• Rubber feet specification
• Size (mm): 302 x 318 x 559 (*The size excludes projections. *Temperature and humidity meter is not included. )
• UT-Lab.
• Inside of body is highly airtight.
• Select rubber-foot type for installation on desktop or floor surface.Select caster type for installation under lab bench or movement for each sample.
• This desiccator directly decomposes moisture inside chamber by electric current, and continuously removes it for stable dehumidification.
$0
Vacuum Pump Cradle
AS ONE Corporation
• Model number: SPY
• Size (mm): 550 x 250 x 303
• Material: Body/steel plate melamine resin bake coating, Sponge/CR sponge rubber
• Caster: f40mmPA (Nylon) made (with stopper)
• Stick the sponge rubber of 10*mm* thickness on top plate, and suppress the noise by vibration.
• The compact dimensions and storable near the step of the laboratory bench.
$0
Silent Lab Bench
AS ONE Corporation
• Material: Body/Stainless steel *1(*1 stainless steel material that has characteristics equivalent to SUS304 and is magnetic. ) , Sheet/special rubber
• Caster: f50mm made of NBR(nitrile rubber) + NR (natural rubber) (with diagonal stopper)
• Withstand load: Top plate/shelf each about 30kg
• Shelf spacing: 590mm
• Model number: N-900
• Size (mm): 900 x 450 x 800
• Special acoustic absorbent put on surface of top panel reducing metallic noise.
• N-1200 is equipped with folding top panel.
$0
Silent Lab Bench with Folding Table
AS ONE Corporation
• Material: Body/Stainless steel *1(*1 stainless steel material that has characteristics equivalent to SUS304 and is magnetic. ) , Sheet/special rubber
• Caster: f50mm made of NBR(nitrile rubber) + NR (natural rubber) (with diagonal stopper)
• Withstand load: Top plate/shelf each about 30kg, Folding plate/10 kg
• Shelf spacing: 590mm
• Model number: N-1200
• Size (mm): 1200 (900 when table is folded) x 450 x 790
• Special acoustic absorbent put on surface of top panel reducing metallic noise.
• N-1200 is equipped with folding top panel.
$0