Gloves
Cotton-Blended Work Gloves Free Size 12 Pairs
AS ONE Corporation
• material: Polyester, Cotton
• Total length: Approximately 230 mm
• 7 gauge
• 2 pieces stitch
• Weight: about 450 g / dozen
• Size: Free
• Quantity: 1 dozen (12 Twins)
• Model number: 450
Cotton-Blended Work Gloves Free Size 12 Pairs
AS ONE Corporation
• material: Polyester, Cotton
• Total length: Approximately 230 mm
• 7 gauge
• 2 pieces stitch
• Weight: about 600 g / dozen
• Size: Free
• Quantity: 1 dozen (12 Twins)
• Model number: 600
DAILOVE Gloves No.223 L
AS ONE Corporation
• Model number: No. 223 L
• thickness : 1.0 mm (including lining)
• Total length: 330 mm
• Quantity: 1 twin
• material: Surface / PU (polyurethane), Lining / Cotton 100%
• thickness : 1.0 mm (including lining)
• Total length: 330 mm
• Quantity: 1 twin
• material: Surface / PU (polyurethane), Lining / Cotton 100%
DAILOVE Gloves No.223 LL
AS ONE Corporation
• Model number: No. 223 LL
• thickness : 1.0 mm (including lining)
• Total length: 330 mm
• Quantity: 1 twin
• material: Surface / PU (polyurethane), Lining / Cotton 100%
• thickness : 1.0 mm (including lining)
• Total length: 330 mm
• Quantity: 1 twin
• material: Surface / PU (polyurethane), Lining / Cotton 100%
DAILOVE Gloves No.223 LW
AS ONE Corporation
• Model number: No. 223 LW
• thickness : 1.0 mm (including lining)
• Total length: 330 mm
• Quantity: 1 twin
• * The size is more spacious than the L size
• material: Surface / PU (polyurethane), Lining / Cotton 100%
• thickness : 1.0 mm (including lining)
• Total length: 330 mm
• Quantity: 1 twin
• * The size is more spacious than the L size
• material: Surface / PU (polyurethane), Lining / Cotton 100%
DAILOVE Gloves No.223 M
AS ONE Corporation
• Model number: No. 223 M
• thickness : 1.0 mm (including lining)
• Total length: 310 mm
• Quantity: 1 twin
• material: Surface / PU (polyurethane), Lining / Cotton 100%
• thickness : 1.0 mm (including lining)
• Total length: 310 mm
• Quantity: 1 twin
• material: Surface / PU (polyurethane), Lining / Cotton 100%
DAILOVE Gloves No.223 S
AS ONE Corporation
• Model number: No. 223 S
• thickness : 1.0 mm (including lining)
• Total length: 310 mm
• Quantity: 1 twin
• material: Surface / PU (polyurethane), Lining / Cotton 100%
• thickness : 1.0 mm (including lining)
• Total length: 310 mm
• Quantity: 1 twin
• material: Surface / PU (polyurethane), Lining / Cotton 100%
ESD Gloves
AS ONE Corporation
• colors: gray
• Size: S
• Number of gauges: 13
• list colors: Red
• Total length (cm): 21.0
• palm around (cm): 16.0
• Middle finger length (cm): 7.6
• EN 420 standards
• Surface resistance: 4.99 ? 10 ^ 4 O (Fingertip coating part)
• material/Finishing: Polyamide, Carbon, Polyurethane
• Country of origin: China
• Code number: 116 -3527
• Size: S
• Number of gauges: 13
• list colors: Red
• Total length (cm): 21.0
• palm around (cm): 16.0
• Middle finger length (cm): 7.6
• EN 420 standards
• Surface resistance: 4.99 ? 10 ^ 4 O (Fingertip coating part)
• material/Finishing: Polyamide, Carbon, Polyurethane
• Country of origin: China
• Code number: 116 -3527
ESD Gloves
AS ONE Corporation
• colors: gray
• Size: M
• Number of gauges: 13
• list color: blue
• Total length (cm): 22.0
• palm around (cm): 17.0
• Middle finger length (cm): 7.8
• EN 420 standards
• Surface resistance: 4.99 ? 10 ^ 4 O (Fingertip coating part)
• material/Finishing: Polyamide, Carbon, Polyurethane
• Country of origin: China
• Code number: 116 -3528
• Size: M
• Number of gauges: 13
• list color: blue
• Total length (cm): 22.0
• palm around (cm): 17.0
• Middle finger length (cm): 7.8
• EN 420 standards
• Surface resistance: 4.99 ? 10 ^ 4 O (Fingertip coating part)
• material/Finishing: Polyamide, Carbon, Polyurethane
• Country of origin: China
• Code number: 116 -3528
F-TELON Gloves (Strong Acid (Hydrofluoric Acid, Aqua Regia, etc.) Resistant Gloves) For Men Long A-22L 1 Pair
AS ONE Corporation
• thickness : 0.5 mm
• Apply: A-22 L male (long)
• Total length: 580 mm
• Quantity: 1 twin
• material: Table / CSM (hyperone), Back / NBR (nitrile rubber)
• glove for strong acid such as hydrofluoric acid
• Apply: A-22 L male (long)
• Total length: 580 mm
• Quantity: 1 twin
• material: Table / CSM (hyperone), Back / NBR (nitrile rubber)
• glove for strong acid such as hydrofluoric acid
F-TELON Gloves (Strong Acid (Hydrofluoric Acid, Aqua Regia, etc.) Resistant Gloves) For Men Short A-22 1 Pair
AS ONE Corporation
• thickness : 0.5 mm
• Apply: A-22 men (short)
• Total length: 360 mm
• Quantity: 1 twin
• material: Table / CSM (hyperone), Back / NBR (nitrile rubber)
• glove for strong acid such as hydrofluoric acid
• Apply: A-22 men (short)
• Total length: 360 mm
• Quantity: 1 twin
• material: Table / CSM (hyperone), Back / NBR (nitrile rubber)
• glove for strong acid such as hydrofluoric acid
F-TELON Gloves (Strong Acid (Hydrofluoric Acid, Aqua Regia, etc.) Resistant Gloves) For Women Long B-22L 1 Pair
AS ONE Corporation
• thickness : 0.4 mm
• Apply: B-22 L female (long)
• Total length: 550 mm
• Quantity: 1 twin
• material: Table / CSM (hyperone), Back / NBR (nitrile rubber)
• glove for strong acid such as hydrofluoric acid
• Apply: B-22 L female (long)
• Total length: 550 mm
• Quantity: 1 twin
• material: Table / CSM (hyperone), Back / NBR (nitrile rubber)
• glove for strong acid such as hydrofluoric acid
F-TELON Gloves (Strong Acid (Hydrofluoric Acid, Aqua Regia, etc.) Resistant Gloves) For Women Short B-22 1 Pair
AS ONE Corporation
• thickness : 0.4 mm
• Apply: B-22 for girls (short)
• Total length: 290 mm
• Quantity: 1 twin
• material: Table / CSM (hyperone), Back / NBR (nitrile rubber)
• glove for strong acid such as hydrofluoric acid
• Apply: B-22 for girls (short)
• Total length: 290 mm
• Quantity: 1 twin
• material: Table / CSM (hyperone), Back / NBR (nitrile rubber)
• glove for strong acid such as hydrofluoric acid
Glove Bag 430 x 430 x 280mm 6 Pieces
AS ONE Corporation
• Model number: X-17
• Size (mm): 430 x 430 x 280
• Quantity: 1 case (6 sheets)
• Material: PE (Polyethylene)
• Accessories: Handy lock, Tube coupler, Gloves
• Can be cleaned with small amount of gas and you can re-use it.
• Because spout is attached on the side, device is easy for getting in and out.
Glove Bag 500 x 500 x 300mm 6 Pieces
AS ONE Corporation
• Model number: S-20
• Size (mm): 500 x 500 x 300
• Quantity: 1 case (6 sheets)
• Material: PE (Polyethylene)
• Accessories: Handy lock, Tube coupler, Gloves
• Can be cleaned with small amount of gas and you can re-use it.
• Because spout is attached on the side, device is easy for getting in and out.
Glove Bag 680 x 680 x 380mm 6 Pieces
AS ONE Corporation
• Model number: X-27
• Size (mm): 680 x 680 x 380
• Quantity: 1 case (6 sheets)
• Material: PE (Polyethylene)
• Accessories: Handy lock, Tube coupler, Gloves
• Can be cleaned with small amount of gas and you can re-use it.
• Because spout is attached on the side, device is easy for getting in and out.
Glove Bag 750 x 500 x 350mm 6 Pieces
AS ONE Corporation
• Model number: S-30
• Size (mm): 750 x 500 x 350
• Quantity: 1 case (6 sheets)
• Material: PE (Polyethylene)
• Accessories: Handy lock, Tube coupler, Gloves
• Can be cleaned with small amount of gas and you can re-use it.
• Because spout is attached on the side, device is easy for getting in and out.
Glove Box
AS ONE Corporation
• Model number: Galaxy
• Size (mm): 981 x 643 x 675
• Usage: Gas replacement
• Weight (kg): 24
• Material: Body/PE (polyethylene), Pass box and Window/Transparent PMMA (acrylic) plate, Valve, vacuum gauge mounting portion/PC (polycarbonate)
• Power cord length: 1.8m (2P plug)
• Accessories: Chamber fluorescent lamp 10W x 1 volume, Large Gloves for Glove box x 1 pair, Vacuum gauge x 1 piece, Valve for gas replacement: Body/for ID f6 Hose x 2 pieces, Pass box/For ID f6 Hose x 1 pieces, for ID f13 Hose x 1 piece
• Size (mm): 981 x 643 x 675
• Usage: Gas replacement
• Weight (kg): 24
• Material: Body/PE (polyethylene), Pass box and Window/Transparent PMMA (acrylic) plate, Valve, vacuum gauge mounting portion/PC (polycarbonate)
• Power cord length: 1.8m (2P plug)
• Accessories: Chamber fluorescent lamp 10W x 1 volume, Large Gloves for Glove box x 1 pair, Vacuum gauge x 1 piece, Valve for gas replacement: Body/for ID f6 Hose x 2 pieces, Pass box/For ID f6 Hose x 1 pieces, for ID f13 Hose x 1 piece
Glove Box
AS ONE Corporation
• Model number: AFGB-745
• Size (mm): 745 x 500 x 604
• Usage: Gas replacement
• Weight (kg): 16
• Large opening Inlet type
• Material: Body/PMMA (acrylic), Frame/aluminum, Bottom plate, stainless steel (SUS430)
• Frontage base: 665 x 420mm
• Withstand load: Approx 30kg
• Large opening Inlet type
• Accessories: Large Gloves for Glove box x 1 pair
• Bottom and top can be separated from body to allow handling large objects.
• Put equipment and sample on the bottom plate, and cover them with top.
Glove Box
AS ONE Corporation
• Material: Body/stainless steel (SUS304), Window portion/PC (Polycarbonate)
• Circulation air volume: 1m3/min
• Dust collection effect: 99.97% or more (0.3?m particle)
• Power supply: AC100V 50/60Hz 1A
• Power cord length: 1.8m (2P plug)
• Size: 600 x 529 x 700mm (including Cleaning unit)
• Weight: 20.4kg
• Gloves: 0.4mm thickness
• Accessories: Large Gloves for Glove box x 1 pair
• Built-in filter: Antibacterial, deodorant HEPA filter:
• Model number: GB-600SCAD
• *Glove included is with powder. When using, if necessary, please use it after washing off with flowing water etc. Also, We take a special order to clean.
• Clean type glove box equipped with circulating clean air unit.
• Equipped with UV sterilization lamp(15W) and inside fluorescent light.