Stainless Steel Product

Manufacturers
Sort By
Simplified Limiter

Simplified Limiter

AS ONE Corporation

• Model number: KL-01
• Temperature settings range: -50 - 300?
• Mechanism: Variable type high limiter
• Control system: Expansion control by liquid expansion capillary system
• Number of poles: 1
• Power supply: 100VAC 50/60Hz
• Power cord length: Approximately 2.8m (with 3P plug, adapter )
• Connection capacity of used instrument: AC100V MAX 15A
• Size: Liquid expansion type capillary pipe/1730mm, Sensor/f9 x 91.5mm
• Material: Stainless steel (SUS304)
• Capillary material: Body exterior/steel melamine bake coating
• Thermostat: EGO product numbers 55, 13455, 010
• Main unit size: 140 x 88 x 50/91mm
• Cut temperature can be set up by variable type high limiting circuit.
• If temperature reading on thermometer becomes high from preset temperature of use apparatus, current will be cut automatically, but even if temperature reading on thermometer falls, don't return.
$0
Vacuum Dryer (Far-Infrared Type)

Vacuum Dryer (Far-Infrared Type)

AS ONE Corporation

• Heater capacity: 500 W
• Temperature range: R.T. to 275 ? C
• Vacuum room temperature control range: R.T. to 150 ? C
• Maximum temperature of dried product: 275 ? C
• The degree of vacuum reaches 133 Pa (1 Torr)
• Vacuum chamber material: stainless steel (SUS304)
• Observation window Dimensions: 280 x 270 mm
• Vacuum valve hose diameter: f8 mm
• power supply: AC100V 50 / 60Hz
• power cord: about 1.5 m (3P Plug)
• inner dimension (mm): 300 x 300 x 275
• Weight: About 31 kg
• Accessories: Gold rack and 2 pieces
• Recommended pumps: (1-672-07) oil rotation vacuum pumps G-50 SA
• * The target material will increase significantly from inside temperature due to the drying object, so please be careful when selecting models
• Model number: VO-FR1
• Drying time can be shortened with far infrared rays heater installed in vacuum interior of chamber.
• Heater power consumption is 1/2 or less of usual goods.
• Vacuum indoor heating realized small size and weight saving of body.
$0
Large Incubator

Large Incubator

AS ONE Corporation

• Model number: SIC-350
• Inner dimension (mm): 460 x 585 x 1285
• Outer dimension (mm): 600 x 835 x 1730
• Air jacket type natural convection system
• Temperature settings range: Room temperature +5 - 60?
• Temperature distribution width: +/- 1? (37? when setting)
• Sensor: K class thermocouple
• Temperature adjustment: PID control, SSR output
• Timer function: ON, OFF, ON/OFF, SV start
• Timer setting range: 1 minute - 99 hours 59 minutes
• Heater capacity: 700W
• Safety device: Excessive temperature rise prevention device, overcurrent breaker
• Power supply: 100ACV 50/60Hz 8A
• Power cord length: 3m (2P plug)
• Exterior, interior: Stainless steel (SUS430)
• Shelf board material: Steel chromium plating finish
• Shelf load: 15kg/sheet (Max)
• Caster: f50mm (with stoppers)
• Weight: 80kg
• Accessories: Shelf board x 5 boards
• It is easy to observe the inside with large insulated glass window.
• Air-jacketed natural convection system in which hot air is circulated through jacket of outside features excellent in temperature distribution and can control the stable temperature.
• Because both exterior and interior are made of stainless steel, it can be used cleanly.
• It is equipped with 4 kinds of timer function(ON?OFF?ON/OFF?SV start).
$0
Stainless Steel Vacuum Can 2L

Stainless Steel Vacuum Can 2L

AS ONE Corporation

• Material: Main body / stainless steel (SUS304), packing / Silicone rubber
• The upper lid open and close draw latch. Thermometer has a seated seat
• Incoming vacuum: 0.1 MPa (-750 Torr)
• Temperature range: 70 ? C or less (R.T.)
• Accessories: vacuum gauge ? 1 piece, step drill joint with cock (1/4 inch) x 2 pieces
• Model number: SSK-01
• Size (mm): 160 x 120
• Capacity: approx. 2L
• Accessories are fully provided so that decompression processing can be performed immediately.
• Flat bottom makes it stable.
$0