Stainless Steel Container
Waste Liquid Collection Unit 480 x 420 x 610mm
AS ONE Corporation
• Model number: HKY-2
• Size (mm): 480 x 420 x 610
• Weight: 26.0kg
• Material: Body/stainless steel (SUS430), Window/PVC (polyvinyl chloride resin) Handle/ABS, Slide rail/aluminium
• Amount of storage container: 2 pieces
• *A container for recovering effluent is not included.
• *The parts, such as a handle of the door, are made of resin partially, so high-volatility solvent cannot be used.
• UT-Lab.
• These products accommodate polyethylene container and can store waste liquid safely.
• Lock assures safe management of waste liquid
$0
Plastic Container Cart
AS ONE Corporation
• Model number: UT-PTK01
• Size (mm): 500 x 400 x 600
• Weight (kg): 5.2
• UT-Lab.
• Material: Body/steel (AAS resin coating)
• Caster: f50mm made of nylon
• Withstand load: 50kg
• This product can load 2 square bottles(of 20*l*).
• Store square bottles under table, and keep laboratory neat.
$0
Container Partition Plate 360 x 110 x 5Tmm
AS ONE Corporation
• Material: PP (Polypropylene)
• Size (mm): 360 x 110 x 5t
• Pitch (mm): 20
• Model number: SP-36
• Regardless of size, it is easy to make partitions freely by pitch of 2*cm*?2*cm*.
• It is done only by folding into favorite size and inserting in ditch.
$0
Container Partition Plate 560 x 110 x 5Tmm
AS ONE Corporation
• Material: PP (Polypropylene)
• Size (mm): 560 x 110 x 5t
• Pitch (mm): 20
• Model number: SP-56
• Regardless of size, it is easy to make partitions freely by pitch of 2*cm*?2*cm*.
• It is done only by folding into favorite size and inserting in ditch.
$0
Pipet For Aspiration Of Deep Type Container 2.5mL 1000 Pcs
AS ONE Corporation
• Material: PE (Polyethylene)
• Quantity: 1 case (1000 pieces)
• Model number: E-262
• Type: for aspiration of deep type container
• Capacity (mL): 2.5
• Overall length (mm): 230
• Resin ingredient hardly elutes.
• EOG and radiation sterilization are possible.
• Freeze preservation is available.
• Tip of pipette can be sealed by heat.
$0
Silica Gel Dryer
AS ONE Corporation
• Size: Silica gel card container/105 x 152 x 21mm, Dryer/130 x 185 x 105mm
• Power supply: AC100V 50/60Hz
• Power cord length: 1.9m
• Automatic off timer: Maximum approximately 3 hour
• Hygroscopic silica gel card x 4 sheets/dryer x 1 unit
• Silicagel is dried and can be used many times.
• Silica gel approx. 120*g* is in card type container.
$0
Silica Gel Box 3Pcs for Silica Gel Dryer
AS ONE Corporation
• Size: 105 x 152 x 21mm
• Hygroscopic silica gel card (3 sheets)
• Silicagel is dried and can be used many times.
• Silica gel approx. 120*g* is in card type container.
$0
Stirring Blade for Tornado Propeller (With Boss) f100mm
AS ONE Corporation
• Model number: P-100
• Type: Propeller (with boss)
• Blade diameter (fmm): 100
• Material: Stainless steel (SUS316)
• *The larger the size becomes, the larger resistance becomes. Load on a stirrer increases depending on a container, capacity, and viscosity. Please be careful.
• *Load on a body varies depending on the size and shape of various stirring blades. Load also varies depending on the target capacity and viscosity. Please adjust the rotation speed.
• Stirring blades with boss can be fixed on any position as long as shaft is f8*mm*.
• Stirring blades other than ones with boss are fixed on the top of shaft with knob screw.
$0
Stirring Blade for Tornado Angled Fan (With Boss) f100mm
AS ONE Corporation
• Model number: DF-100
• Type: Angled fan (with boss)
• Blade diameter (fmm): 100
• Material: Stainless steel (SUS316)
• *The larger the size becomes, the larger resistance becomes. Load on a stirrer increases depending on a container, capacity, and viscosity. Please be careful.
• *Load on a body varies depending on the size and shape of various stirring blades. Load also varies depending on the target capacity and viscosity. Please adjust the rotation speed.
• Stirring blades with boss can be fixed on any position as long as shaft is f8*mm*.
• Stirring blades other than ones with boss are fixed on the top of shaft with knob screw.
$0
Stirring Blade for Tornado Turbine (With Boss) f100mm
AS ONE Corporation
• Model number: T-100
• Type: Turbine (with boss)
• Blade diameter (fmm): 100
• Material: Stainless steel (SUS316)
• *The larger the size becomes, the larger resistance becomes. Load on a stirrer increases depending on a container, capacity, and viscosity. Please be careful.
• *Load on a body varies depending on the size and shape of various stirring blades. Load also varies depending on the target capacity and viscosity. Please adjust the rotation speed.
• Stirring blades with boss can be fixed on any position as long as shaft is f8*mm*.
• Stirring blades other than ones with boss are fixed on the top of shaft with knob screw.
$0
Stirring Blade for Tornado Flat Paddle (With Boss) f125mm
AS ONE Corporation
• Model number: FP-125
• Type: Flat paddle (with boss)
• Blade diameter (fmm): 125
• Material: Stainless steel (SUS316)
• *The larger the size becomes, the larger resistance becomes. Load on a stirrer increases depending on a container, capacity, and viscosity. Please be careful.
• *Load on a body varies depending on the size and shape of various stirring blades. Load also varies depending on the target capacity and viscosity. Please adjust the rotation speed.
• Stirring blades with boss can be fixed on any position as long as shaft is f8*mm*.
• Stirring blades other than ones with boss are fixed on the top of shaft with knob screw.
$0
Stirring Blade for Tornado Fan Turbine (With Boss) f125mm
AS ONE Corporation
• Model number: FUT-125
• Type: Fan turbine (with boss)
• Blade diameter (fmm): 125
• Material: Stainless steel (SUS316)
• *The larger the size becomes, the larger resistance becomes. Load on a stirrer increases depending on a container, capacity, and viscosity. Please be careful.
• *Load on a body varies depending on the size and shape of various stirring blades. Load also varies depending on the target capacity and viscosity. Please adjust the rotation speed.
• Stirring blades with boss can be fixed on any position as long as shaft is f8*mm*.
• Stirring blades other than ones with boss are fixed on the top of shaft with knob screw.
$0
Stirring Blade for Tornado Propeller (With Boss) f125mm
AS ONE Corporation
• Model number: P-125
• Type: Propeller (with boss)
• Blade diameter (fmm): 125
• Material: Stainless steel (SUS316)
• *The larger the size becomes, the larger resistance becomes. Load on a stirrer increases depending on a container, capacity, and viscosity. Please be careful.
• *Load on a body varies depending on the size and shape of various stirring blades. Load also varies depending on the target capacity and viscosity. Please adjust the rotation speed.
• Stirring blades with boss can be fixed on any position as long as shaft is f8*mm*.
• Stirring blades other than ones with boss are fixed on the top of shaft with knob screw.
$0
Stirring Blade for Tornado Angled Fan (With Boss) f125mm
AS ONE Corporation
• Model number: DF-125
• Type: Angled fan (with boss)
• Blade diameter (fmm): 125
• Material: Stainless steel (SUS316)
• *The larger the size becomes, the larger resistance becomes. Load on a stirrer increases depending on a container, capacity, and viscosity. Please be careful.
• *Load on a body varies depending on the size and shape of various stirring blades. Load also varies depending on the target capacity and viscosity. Please adjust the rotation speed.
• Stirring blades with boss can be fixed on any position as long as shaft is f8*mm*.
• Stirring blades other than ones with boss are fixed on the top of shaft with knob screw.
$0
Stirring Blade for Tornado Turbine (With Boss) f125mm
AS ONE Corporation
• Model number: T-125
• Type: Turbine (with boss)
• Blade diameter (fmm): 125
• Material: Stainless steel (SUS316)
• *The larger the size becomes, the larger resistance becomes. Load on a stirrer increases depending on a container, capacity, and viscosity. Please be careful.
• *Load on a body varies depending on the size and shape of various stirring blades. Load also varies depending on the target capacity and viscosity. Please adjust the rotation speed.
• Stirring blades with boss can be fixed on any position as long as shaft is f8*mm*.
• Stirring blades other than ones with boss are fixed on the top of shaft with knob screw.
$0
Stirring Blade for Tornado Square (With Boss) f75mm
AS ONE Corporation
• Model number: SK-75
• Type: Square (with boss)
• Blade diameter (fmm): 75
• Material: Stainless steel (SUS316)
• *The larger the size becomes, the larger resistance becomes. Load on a stirrer increases depending on a container, capacity, and viscosity. Please be careful.
• *Load on a body varies depending on the size and shape of various stirring blades. Load also varies depending on the target capacity and viscosity. Please adjust the rotation speed.
• Stirring blades with boss can be fixed on any position as long as shaft is f8*mm*.
• Stirring blades other than ones with boss are fixed on the top of shaft with knob screw.
$0
Stirring Blade for Tornado Ring (With Boss) f75mm
AS ONE Corporation
• Model number: R-75
• Type: Ring (with boss)
• Blade diameter (fmm): 75
• Material: Stainless steel (SUS316)
• *The larger the size becomes, the larger resistance becomes. Load on a stirrer increases depending on a container, capacity, and viscosity. Please be careful.
• *Load on a body varies depending on the size and shape of various stirring blades. Load also varies depending on the target capacity and viscosity. Please adjust the rotation speed.
• Stirring blades with boss can be fixed on any position as long as shaft is f8*mm*.
• Stirring blades other than ones with boss are fixed on the top of shaft with knob screw.
$0
Ultra Stirrer Analog
AS ONE Corporation
• Model number: MSA-1N
• Type: Analog
• Size (mm): 200 x 200 x 99
• Stirred capacity: 20L
• Motor: DC brushless motor
• Magnet: Neodium magnet (f19 x 10mm) x 10 pieces
• Material: top board, body exterior/stainless steel (SUS304)
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (3P plug, with 2P conversion adapter)
• *Demonstration equipment is available.
• By arranging 10 strong Neodymium magnets in way magnetic line runs upward, it enables stirring while water bath or like is placed.
• Strong magnets and powerful DC brushless motor enable not only stirring high viscosity samples but also using large stirring bar(100mm or more in length).
• Exterior is stainless steel that gives high chemical resistance, and its structure makes it difficult for liquid to enter body.
• Feedback control makes rotation speed stable even while viscosity changes.
• Container position display on top plate is not printed but laser fabricated, which is durable and will not be dimmed easily. ?It may not turn, if magnetic force of stirring bar or frictional force due to contact area is large.
$0
Ultra Stirrer Digital
AS ONE Corporation
• Model number: MSD-1N
• Type: Digital
• Size (mm): 200 x 200 x 99
• Stirred capacity: 20L
• Motor: DC brushless motor
• Magnet: Neodium magnet (f19 x 10mm) x 10 pieces
• Material: top board, body exterior/stainless steel (SUS304)
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (3P plug, with 2P conversion adapter)
• By arranging 10 strong Neodymium magnets in way magnetic line runs upward, it enables stirring while water bath or like is placed.
• Strong magnets and powerful DC brushless motor enable not only stirring high viscosity samples but also using large stirring bar(100mm or more in length).
• Exterior is stainless steel that gives high chemical resistance, and its structure makes it difficult for liquid to enter body.
• Feedback control makes rotation speed stable even while viscosity changes.
• Container position display on top plate is not printed but laser fabricated, which is durable and will not be dimmed easily. ?It may not turn, if magnetic force of stirring bar or frictional force due to contact area is large.
$0
Mid-Capacity Pan Pelletizer
AS ONE Corporation
• Size (mm): 480 x 313 x 590 (when 45? angle)
• Weight (kg): 9.4
• Pelletization method: Snowman method due to rotation (left rotation)
• Rotation speed: 20 - 112rpm
• Timer: 0 - 9 hours 59 minutes (1 minutes units)
• Material: Body/SPCC (steel plate) white leather tone coating, Pelletization container/stainless steel (SUS304)
• Safety device: Overcurrent protection, glass tube fuse 0.5A
• Pelletization container inner dimensions: f300 x 120mm
• Obliquing angle: 90? (horizontal to vertical)
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Plug shape: 3P with ground pin (with conversion adapter)
• Processable amount: 1kg (when 45? angle)
• Motor: 10W
• Model number: PZ-02R
•
• Angle, rotation, and time setting is the rotation granulator of freely pan dia. 240*mm*.
• Useful in small amount of granulated sample making.
•
• It is granulator of capacity in, up pan diameter and rotation torque peripheral speed of pan granulator DPZ-01R.
• Rotation speed timer is possible precise setting in digital.
•
• It is medium-capacity pan granulator type equipped with a drying function to PZ-02R.
• Even if too hydrolysis during granulation can be water-reducing in the dry.
• It is double outside with plate to eliminate the touch of a high temperature.
$0