Laboratory Presses & Sealers

• Reached vacuum: 58.6 kPa
• Seal system: Lower heating
• Seal ability: 0.4 mm or less / 2 pieces
• power supply: AC100V 50 / 60Hz 1050 (560) W
• * In parentheses, 5 mm width seal heating
• Nagatoshi power cord: 3 m (2P Type)
• Weight: 12 kg
• Model number: V 301
• Seal size (Width ? Long mm): 10 (5) x 300
• main unit size (mm): 400 x 420 x 228

• Reached vacuum: 58.6 kPa
• Seal system: Heating upper and lower
• Seal ability: 0.5 mm or less / 2 pieces
• power supply: AC100V 50 / 60Hz 1050 W
• Nagatoshi power cord: 3 m (2P Type)
• Weight: 12.7 kg
• Model number: V 301-10 W
• Seal size (Width ? Long mm): 10 x 300
• main unit size (mm): 400 x 420 x 228

• Model number: HHP-1
• Size: 150 x 280 x 443mm
• Weight: Approx 9kg
• Up or down hot plate Distance: 38 - 63mm (stroke: 25m)
• Heating temperature: R.T. +20 - 200?
• Temperature settings: Analog
• Sensor: K class thermocouple
• Material: Press Body/cast Iron baking coating, Lever/cast iron (Chromium Plating), Temperature control/steel coating, Base/Phenol Resin, Top board/aluminum
• Heater: 160W x 1
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5mm
• Suitable for hot pressing of samples in a size as small as a tablet.
• This press can be used with a die(f7~14*mm*?sold separately).
•
• The upper and lower hot plates separately heat samples.

• Model number: HHP2-2D
• Size (mm): 150 x 280 x 465
• Weight (kg): About 14
• Up or down thermal plates Distance: 38 - 63mm (stroke: 25mm)
• Weighted: Maximum approx 40kg
• Heating temperature: R.T. +20 - 300?
• Temperature settings: Digital
• Sensor: K class thermocouple
• Material: Press Body/cast Iron baking coating, Lever/cast iron (Chromium Plating), Temperature control/steel coating, Base/Phenol Resin, Top board/aluminum
• Heater: 160W x 2
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• *Hot plate of up or down does not contact with each other.
• *Use with the optional gold type.
• Suitable for hot pressing of samples in a size as small as a tablet.
• This press can be used with a die(f7~14*mm*?sold separately).
•
• The upper and lower hot plates separately heat samples.

• Model number: H400-01
• Weighted (t): 0 - 1
• Size (mm): 625 x 460 x 500
• Weight (kg): Approx 70
• Hot plate size: 200 x 150mm
• Hot plate stroke: 0 - 90mm
• Heating temperature: R.T. +20 - 400?
• Heater capacity: 1150W/heating plate x 2
• Temperature adjustment: PID type
• Pressure gauge: With left needle, analog display
• Power supply: AC200V 50/60Hz
• Power cord length: 2.5m
• Plug shape: Without plug
• *it cannot hold pressure for long hours.
• *Pressure is recommended for use in 50% or more of the largest value.
• Allows for hot pressing operations at higher temperature(Max. 400?)compared with conventional press, ensuring wide range of applications such as heating compression molding.
• Capable of manufacturing plastic sheets and molding samples.
• This press is compatible with optional hot press dies(1-6002-11~? P.211).
• Driven by hydraulic pressure, it ensures easy weight application.
• Peak hold pressure gauge with 2-pointers allows you to check the applied pressure.

• Model number: H400-05
• Weighted (t): 0 - 5
• Size (mm): 635 x 490 x 535
• Weight (kg): Approx 73
• Hot plate size: 200 x 150mm
• Hot plate stroke: 0 - 90mm
• Heating temperature: R.T. +20 - 400?
• Heater capacity: 1150W/heating plate x 2
• Temperature adjustment: PID type
• Pressure gauge: With left needle, analog display
• Power supply: AC200V 50/60Hz
• Power cord length: 2.5m
• Plug shape: Without plug
• *it cannot hold pressure for long hours.
• *Pressure is recommended for use in 50% or more of the largest value.
• Allows for hot pressing operations at higher temperature(Max. 400?)compared with conventional press, ensuring wide range of applications such as heating compression molding.
• Capable of manufacturing plastic sheets and molding samples.
• This press is compatible with optional hot press dies(1-6002-11~? P.211).
• Driven by hydraulic pressure, it ensures easy weight application.
• Peak hold pressure gauge with 2-pointers allows you to check the applied pressure.

• Model number: H400-15
• Weighted (t): 0 - 15
• Size (mm): 650 x 490 x 620
• Weight (kg): Approx 87
• Hot plate size: 200 x 150mm
• Hot plate stroke: 0 - 90mm
• Heating temperature: R.T. +20 - 400?
• Heater capacity: 1150W/heating plate x 2
• Temperature adjustment: PID type
• Pressure gauge: With left needle, analog display
• Power supply: AC200V 50/60Hz
• Power cord length: 2.5m
• Plug shape: Without plug
• *it cannot hold pressure for long hours.
• *Pressure is recommended for use in 50% or more of the largest value.
• Allows for hot pressing operations at higher temperature(Max. 400?)compared with conventional press, ensuring wide range of applications such as heating compression molding.
• Capable of manufacturing plastic sheets and molding samples.
• This press is compatible with optional hot press dies(1-6002-11~? P.211).
• Driven by hydraulic pressure, it ensures easy weight application.
• Peak hold pressure gauge with 2-pointers allows you to check the applied pressure.

• Model number: H300-01
• Weighted (t): 0 - 1
• Size (mm): 470 x 350 (500) x 456
• Weight (kg): Approx 54
• Hot plate size: 200 x 150mm
• Hot plate stroke: 0 - 90mm
• Heating temperature: R.T. +20 - 300?
• Heater capacity: 660W/heating plate x 2 sheets
• Temperature adjustment: PID type
• Pressure gauge: With left needle, analog display
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (with 3P plug)
• Application: To fabricate a compression forming type test and samples of resin and various powder.
• Capable of manufacturing plastic sheets and molding samples.
• Suitable for heating compression molding tests of various materials.
• Driven by hydraulic pressure, it ensures easy weight application.
• Peak hold pressure gauge with 2-pointers allows you to check applied pressure.
• Equipped with load cell for measuring of applied weight, it digitally displays the weighted value(H300-10D).

• Model number: H300-05
• Weighted (t): 0 - 5
• Size (mm): 470 x 380 (735) x 490
• Weight (kg): Approx 55
• Hot plate size: 200 x 150mm
• Hot plate stroke: 0 - 90mm
• Heating temperature: R.T. +20 - 300?
• Heater capacity: 660W/heating plate x 2 sheets
• Temperature adjustment: PID type
• Pressure gauge: With left needle, analog display
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (with 3P plug)
• Application: To fabricate a compression forming type test and samples of resin and various powder.
• Capable of manufacturing plastic sheets and molding samples.
• Suitable for heating compression molding tests of various materials.
• Driven by hydraulic pressure, it ensures easy weight application.
• Peak hold pressure gauge with 2-pointers allows you to check applied pressure.
• Equipped with load cell for measuring of applied weight, it digitally displays the weighted value(H300-10D).

• Model number: H300-15
• Weighted (t): 0 - 15
• Size (mm): 570 x 380 (725) x 570
• Weight (kg): Approx 70
• Hot plate size: 200 x 150mm
• Hot plate stroke: 0 - 90mm
• Heating temperature: R.T. +20 - 300?
• Heater capacity: 660W/heating plate x 2 sheets
• Temperature adjustment: PID type
• Pressure gauge: With left needle, analog display
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (with 3P plug)
• Application: To fabricate a compression forming type test and samples of resin and various powder.
• Capable of manufacturing plastic sheets and molding samples.
• Suitable for heating compression molding tests of various materials.
• Driven by hydraulic pressure, it ensures easy weight application.
• Peak hold pressure gauge with 2-pointers allows you to check applied pressure.
• Equipped with load cell for measuring of applied weight, it digitally displays the weighted value(H300-10D).

• Model number: MNP-001
• Type: Analog
• Size: 250 x 150 x 492mm
• Plate size: 80 x 60mm
• Stroke: 0 - 70mm
• Heating temperature: -20 - 200?
• Heater capacity: 160W x 1
• Temperature adjustment: Microcomputer type proportional control
• Sensor: K class thermocouple
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (3P plug with ground pin)
• Lead feed amount: 1 Handle rotation 4mm
• Weight: Approx 18kg
• A simple hot press convenient for testing under a low weight.
• Allows for manual adjustment of the pressure to any value.
• Only the temperature of the upper hot plate can be adjusted(MNP-001).
• Suitable for heating compression molding tests of various materials.

• Model number: MNP2-002D
• Type: Digital settings
• Size (mm): 250 x 150 x 512
• Plate size: 80 x 60mm
• Stroke: 0 - 45mm
• Weighted: Maximum approx 500kg
• Heating temperature: -20 - 200?
• Heater capacity: 160W x 2
• Temperature adjustment: PID control
• Sensor: K class thermocouple
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (3P plug with ground pin)
• Lead feed amount: 1 Handle rotation 4mm
• Weight: Approx 18kg
• A simple hot press convenient for testing under a low weight.
• Allows for manual adjustment of the pressure to any value.
• Only the temperature of the upper hot plate can be adjusted(MNP-001).
• Suitable for heating compression molding tests of various materials.