Temperature Controllers

• Water tank: Material/stainless steel (SUS316), Capacity/7L
• Body material: Stainless steel (SUS304)
• Temperature controller: PID control
• Temperature settings range: Room temperature +5 - 80?
• Temperature controller timer: 0 - 99 hours 59 minutes (with equipment stop function)
• Temperature control system: Microcomputer PID control
• Temperature sensor: K class thermocouple
• Temperature display precision: +/- 2?
• Heater capacity: Sheathed heater 1000W
• Safety device: Temperature excessive rise prevention device, overcurrent prevention fuse
• Power supply: 100VAC 50/60Hz
• Power cord: 2.5m 3P plug (with 2P conversion adapter)
• Weight: 2.4kg
• Outer dimension (mm): 314 x 395 x 120
• Chamber dimensions (mm): f300 x 120
• *Demonstration equipment 3-1496-01 is available.
• Model number: BWB-300
• Possible to regulate temperature accurately and stably by means of PID control.
• With large width, it is suitable to use for evaporator.
• Because control unit is located on lateral side, stirrer and stirring drain board can be used in combination.

• Model number: K class thermocouple conversion cable (TE-KC)
• Specification: M3.5Y terminal, female connector/cable length approximately 100mm
• M3.5Y terminal <-> miniature connector terminal

• Model number: HPR6-1515
• Highest temperature (?): 600
• Plate size (mm): 150 x 150
• Body material: Stainless steel (SUS304, SUS430 for bottom plate only)
• Plate material: Stainless steel (SUS304) + ceramic coating
• Size: 335 x 225 x 121mm
• Heater capacity: Sheathed heater 1350W
• Temperature controller: PID control
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)
• Safety device: Overcurrent protection, excessive temperature rise prevention
• Power supply: 100VAC 50/60Hz
• Power cord: 2.5m, 3P plug with an earth
• Weight: 6.6kg
• Withstand load: 5kg
• *If you hit sharp metal on top board, coating will be peeled and get cracked to expose internal metal and it can cause corrosion. Please be careful.
• *If you hit sharp metal on top board, coating will be peeled and get cracked to expose internal metal and it can cause corrosion. Please be careful.
• Max. Temperature 600? Achieved 600? which has been long awaited 2-sizes available 2-sizes are provided according to the work area and work size.
• Top plate is provided with ceramic coating with improved chemical resistance.
• Top plate is not be cracked in any event because it is made of annealed SUS304.
• To prevent overheat, manual reset bimetal switch is adopted.
• Sheath heater is adopted which enables heating to high temperatures.

• Model number: HPR6-3030
• Highest temperature (?): 600
• Plate size (mm): 300 x 300
• Body material: Stainless steel (SUS304, SUS430 for bottom plate only)
• Plate material: Stainless steel (SUS304) + ceramic coating
• Size: 485 x 375 x 125mm
• Heater capacity: Sheathed heater 4800W
• Temperature controller: PID control
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)
• Safety device: Overcurrent protection, excessive temperature rise prevention
• Power supply: Single phase 200V 50/60Hz
• Power cord: 2.5m, Plug shape (put outlet 2i.eps)
• Weight: 21kg
• Withstand load: 10kg
• *If you hit sharp metal on top board, coating will be peeled and get cracked to expose internal metal and it can cause corrosion. Please be careful.
• *30A of power supply is required.
• *If you hit sharp metal on top board, coating will be peeled and get cracked to expose internal metal and it can cause corrosion. Please be careful.
• *30A of power supply is required.
• Max. Temperature 600? Achieved 600? which has been long awaited 2-sizes available 2-sizes are provided according to the work area and work size.
• Top plate is provided with ceramic coating with improved chemical resistance.
• Top plate is not be cracked in any event because it is made of annealed SUS304.
• To prevent overheat, manual reset bimetal switch is adopted.
• Sheath heater is adopted which enables heating to high temperatures.

• Model number: TXN800W
• Specification: 130 x 160 x 84mm
• Power supply: 100VAC 50/60Hz
• Connection capacity: AC100V MAX 15A (including output for alert)
• Temperature control system: PID control (with auto-tuning)
• Output control system: Voltage output by SSR
• Safety mechanism Double component of SSR and relay, 15A fuse
• Power cord: About 1.8m (3P plug)
• Weight: Approx 1.5kg
• Temperature display precision: +/-2? or instruction value +/- (0.3% + 1 digit), whichever is larger
• Sensor type: K class thermocouple
• Setting temperature: -100 to +1000?
• Setting system: UP/DOWN key
• Timer type: Autostart, auto-stop, SV start
• Timer setting available time: 1 - 99 hours 59 minutes
• Connection terminal: Control output/3P outlet, Alarm Output, sensor input /M3.5Y terminal block
• Accessories: Sheath type K thermocouple sensor (0 - 750?)
• *As included K class thermocouple sensor is the type of standard, Please prepare sensor capable for higher temperature separately.
• This is standard temperature controller equipped with alarm output terminal.
• 100V/1A alarm output enables various combinations including warning lamps and buzzers
• Device allows you to configure temperature control and alarm control. This turns on alarm output when configured alarm value is reached.
• This temperature controller is equipped with PID temperature control system which ensures highly accurate temperature control.
• Double component structure including SSR and relay ensures that when SSR malfunctions, relay circuit blocks continuous current flow.
• To see current output status, simply check OUT lamp.

• Model number: TXN800WAL (body)
• Specification: 130 x 160 x 84mm
• Power supply: 100VAC 50/60Hz
• Connection capacity: AC100V MAX 15A (including output for alert)
• Output for alert: 100V MAX 1A
• Temperature control system: Main control ON/OFF
• Output control system: Relay contact output
• Safety mechanism 15A fuse
• Power cord: About 1.8m (3P plug)
• Weight: Approx 1.5kg
• Temperature display precision: +/-2? or instruction value +/- (0.3% + 1 digit), whichever is larger
• Sensor type: K class thermocouple
• Setting temperature: -100 to +1000?
• Setting system: UP/DOWN key
• Connection terminal: Control output/3P outlet, Alarm Output, sensor input /M3.5Y terminal block
• Accessories: K class thermocouple round terminal specification (capable for 180?), Cable length: Approx 2m
• *Demonstration equipment is available.
• *Included K class thermocouple sensor is standard type. Please prepare sensor capable for higher temperature separately.
•
• In addition to forcibly turning off temperature anomaly, it outputs power supply for alert.
• Alert output is 100V/1A specification, various combinations such as warning lamp and buzzer are possible.
• Separately, if use sensor with high heat resistance, possible to control up to 1000 ?.
•
• It is Y terminal specification that can be connected without processing to terminal block.
• When AC100 V is input, the alarm is announced with rotary type flash.
• Buzzer included warning with buzzer according to light emission.
• By using optional mounting set, it becomes possible to fix to wall or metal part.
•
• Conversion from terminal connection to 2-terminals receptacle is possible.
•
• Conversion from terminal connection to miniature connector type is possible.

• Model number: VL04M-100NPR/AY
• Specification: LED warning light (without buzzer)
• AC100V 2.5W
• Power cable: M4Y terminal 2 lines, Cable length: Approximately 1m (connectable to M3.5Y terminal block of body)
• Weight: Approx 140g
• Light emitting color: Red

• Model number: VL04M-100BPR/AY
• Specification: LED warning light (with buzzer)
• AC100V 2.5W
• Power cable: M4Y terminal 2 lines, Cable length: Approximately 1m (connectable to M3.5Y terminal block of body)
• Weight: Approx 140g
• Light emitting color: Red
• Buzzer sound pressure: Maximum 70dB (at 1m)

• Model number: Wall surface mounting bracket set
• Specification: -

• Model number: Pedestal set with magnet
• Specification: -