Stainless Steel Product
Silent Lab Cart Economy
AS ONE Corporation
• Material: Body/stainless steel (SUS304), Sheet/special rubber
• Caster: f100mm (quietness strengthening type)
• Withstand load: Top plate/shelf each about 20kg
• Shelf spacing: 415mm
• Model number: W-600
• Size (mm): 600 x 450 x 850
• Special acoustic absorbent put on surface of top panel reducing metallic noise.
• This product with silent casters moves quietly.
$0
Chemical-Resistant Double Sliding Storehouse Steel Door (With Drawer) (Deep Type)
AS ONE Corporation
• Model number: N -515 DH?OW
• Type: Steel door (deep)
• External dimensions: 515 x 880 x 880mm
• Material : Steel (powder coating)
• Frontage Width: 820mm
• Shelf board Load tolerance: 40 kg/sheet
• inner size : 857 x 425 x 820 mm (including drawer)
• Drawer external dimension : 310 x 350 x 145 mm x 2 pieces
• Shelf Receptacle pitch: 30mm
• Weight: 38.5 kg
• With key
• Perforated
• Attached shelf board: 1 piece
• *Stop bar base is not included.
$0
Gas Substitution Desiccator (Stainless Steel)
AS ONE Corporation
• Model number: GD-SS
• Outer dimension (mm): 574 x 517 x 1765 (*not including projections for external dimension. )
• Inner dimension (mm): 560 x 483 x 1486
• SUS wall type
• Material: Body/stainless steel (Stainless Steel (Stainless Steel (SUS304))), Door/antistatic PMMA (acrylic) plate, Frame/aluminum sash, Shelf board/stainless steel (Stainless Steel (SUS430))
• Shelf board dimensions: 490 x 460mm
• Shelf board mounting pitch: 50mm
• Shelf board load capacity: Approximately 20kg/board
• Valve mounting screw: Rc1/4 x 4 pieces
• Caster: F65mm Nylon (with stopper x 2)
• With 1 earth terminal at the bottom of the right side of the body (with earthed line 3m)
• Shelf board interval: 40mm
• Accessories: Shelf board x 4, Silica gel plate x 1 plate
• Door part has adopted snap lock.
• Suitable for measure against static electricity of electronic components, or storage of chemicals.
$0
Gas Substitution Desiccator (Stainless Steel)
AS ONE Corporation
• Model number: GD-WS
• Outer dimension (mm): 1152 x 517 x 1765 (*not including projections for external dimension. )
• Inner dimension (mm): 1138 x 483 x 1486
• SUS wall type
• Material: Body/stainless steel (Stainless Steel (Stainless Steel (SUS304))), Door/antistatic PMMA (acrylic) plate, Frame/aluminum sash, Shelf board/stainless steel (Stainless Steel (SUS430))
• Shelf board dimensions: 490 x 460mm
• Shelf board mounting pitch: 50mm
• Shelf board load capacity: Approximately 20kg/board
• Valve mounting screw: Rc1/4 x 4 pieces
• Caster: F65mm Nylon (with stopper x 2)
• With 1 earth terminal at the bottom of the right side of the body (with earthed line 3m)
• Shelf board interval: 40mm
• Accessories: Shelf board x 8, Silica gel plate x 2 plates
• Door part has adopted snap lock.
• Suitable for measure against static electricity of electronic components, or storage of chemicals.
$0
Stainless Steel Vacuum Desiccator 15L
AS ONE Corporation
• Material: Exterior / Steel baked paint, Interior / Stainless Steel (SUS304), Door / tempered glass and protective plate (polycarbonate) Double Door
• Allowable vacuum: 0.1 to 101 kPa (1 to 760 Torr)
• Capacity: 15 L
• Weight: 23 kg
• Valve diameter: outer diameter f 13 mm
• Accessories: shelf board x 2 pieces
• Model Number: DVS-250
• external dimension (mm): 384 x 414 x 493
• inner size (mm): 250 x 250 x 250
• Recommended vacuum pumps: (1-4148-03) Dry vacuum pumps DTC-41, (1-4148-11) Dry vacuum pumps DTC-22
• Double door of reinforced glass door and the polycarbonate door for protection is adopted.
• Heat-resistant silicon packing is used, excellent in durability and airtightness.
$0
Stainless Steel Vacuum Desiccator 30L
AS ONE Corporation
• Material: Exterior / Steel baked paint, Interior / Stainless Steel (SUS304), Door / tempered glass and protective plate (polycarbonate) Double Door
• Allowable vacuum: 0.1 to 101 kPa (1 to 760 Torr)
• Capacity: 30 L
• Weight: 32 kg
• Valve diameter: outer diameter f 13 mm
• Accessories: shelf board x 2 pieces
• Model Number: DVS-310
• external dimension (mm): 444 x 474 x 553
• inner size (mm): 310 x 310 x 310
• Recommended vacuum pumps: (1-4148-03) Dry vacuum pumps DTC-41, (1-4148-11) Dry vacuum pumps DTC-22
• Double door of reinforced glass door and the polycarbonate door for protection is adopted.
• Heat-resistant silicon packing is used, excellent in durability and airtightness.
$0
Vacuum Dryer (V-CR Series)
AS ONE Corporation
• Inner capacity (L): 8
• Additional function: Timer function (ON/OFF/ON/OFF timer and SV start)
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• material
• *Exterior: Steel baked paint
• *Interior: Stainless steel SUS304 chemical resistance ceramic coating
• *shelf board : Aluminium chemical resistance ceramic coating
• *Piping and Fittings: Stainless steel SUS304 chemical resistance ceramic coating
• *Valve/Vacuum gauge: Stainless steel (SUS316, PTFE)
• *Door packing: fluorinated rubber
• *Observation window: tempered glass (Thickness 12mm), protective plate made of polycarbonate
• Outer dimensions (mm): 343 x 376 x 509
• Inner dimensions (mm): 200 x 200 x 200
• Heater capacity: 800W
• Power supply: AC100V 50/60Hz 8A
• Power cord length: 2.5 m
• Weight: about 25kg
• Accessories: shelf board x 2 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
$0
Vacuum Dryer (V-CR Series)
AS ONE Corporation
• Inner capacity (L): 15
• Additional function: Timer function (ON/OFF/ON/OFF timer and SV start)
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• material
• *Exterior: Steel baked paint
• *Interior: Stainless steel SUS304 chemical resistance ceramic coating
• *shelf board : Aluminium chemical resistance ceramic coating
• *Piping and Fittings: Stainless steel SUS304 chemical resistance ceramic coating
• *Valve/Vacuum gauge: Stainless steel (SUS316, PTFE)
• *Door packing: fluorinated rubber
• *Observation window: tempered glass (Thickness 12mm), protective plate made of polycarbonate
• Outer dimensions (mm): 393 x 426 x 559
• Inner dimensions (mm): 250 x 250 x 250
• Heater capacity: 800W
• Power supply: AC100V 50/60Hz 8A
• Power cord length: 2.5 m
• Weight: about 33kg
• Accessories: shelf board x 2 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
$0
Vacuum Dryer (V-CR Series)
AS ONE Corporation
• Inner capacity (L): 30
• Additional function: Timer function (ON/OFF/ON/OFF timer and SV start)
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• material
• *Exterior: Steel baked paint
• *Interior: Stainless steel SUS304 chemical resistance ceramic coating
• *shelf board : Aluminium chemical resistance ceramic coating
• *Piping and Fittings: Stainless steel SUS304 chemical resistance ceramic coating
• *Valve/Vacuum gauge: Stainless steel (SUS316, PTFE)
• *Door packing: fluorinated rubber
• *Observation window: tempered glass (Thickness 12mm), protective plate made of polycarbonate
• Outer dimensions (mm): 453 x 486 x 619
• Inner dimensions (mm): 310 x 310 x 310
• Heater capacity: 1360W
• Power supply: AC100V 50/60Hz 14 A
• Power cord length: 2.5 m
• Weight: about 45kg
• Accessories: shelf board x 2 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
$0
Bimetal Thermometer Sensor Shape: T
AS ONE Corporation
• Model number: MS-6611
• Outer diameter: f85mm
• Sensor shape: T
• Operating temperature range: 0 - 100?
• Minimum scale: 2?
• Material: Stainless steel (SUS304)
• Screw for installing: PT1/2
• Accuracy: +/- 2.0%
• Thermosensitive part size: f6.4 x 100mm
• Exterior is made of stainless steel(SUS304), and excellent in corrosion resistance.
• With sealed structure, usable at outdoor and chemical factory
$0
Standard Sensor For Waterproof Digital Thermometer
AS ONE Corporation
• Standard sensor
• Measurement range: -40 to +250?
• Size: f3 x 150mm
• Sensor: Probe material/stainless steel (SUS304), Cord length/approx 1m
• Waterproof protection grade: IPX7 compliance
• This thermometer features various functions required at food inspection facilities and plants.
• HACCP check function(WT-200 model) sends LED notification if temperature stays at 75? or more for 1 minute.
• WT-300 model allows you to save up to 100 data.
$0
SS Base Mold 7 x 7 x 5mm
AS ONE Corporation
• Material: Stainless Steel (SUS304)
• Quantity: 12 pcs
• Model number: M474-1
• Hole size (mm): 7 x 7 x 5
• Excellent in thermal conductivity.
• It supports various cassettes and rings.
• Structured with swhich paraffin separates easily.
$0
SS Base Mold 24 x 24 x 5mm
AS ONE Corporation
• Material: Stainless Steel (SUS304)
• Quantity: 12 pcs
• Model number: M474-3
• Hole size (mm): 24 x 24 x 5
• Excellent in thermal conductivity.
• It supports various cassettes and rings.
• Structured with swhich paraffin separates easily.
$0
SS Base Mold 30 x 24 x 5mm
AS ONE Corporation
• Material: Stainless Steel (SUS304)
• Quantity: 12 pcs
• Model number: M474-4
• Hole size (mm): 30 x 24 x 5
• Excellent in thermal conductivity.
• It supports various cassettes and rings.
• Structured with swhich paraffin separates easily.
$0
Colony Shooting Kit 205 x 221 x 262mm
AS ONE Corporation
• Light source: Fluorescent lamps FL4W x 2
• Material: Light table/Stainless Steel (SUS430), Dark box/PVC (vinyl chloride resin)
• Power supply: AC100V 50/60Hz
• Power cord length: 1.2m (2P plug)
• Size: Light table/205 x 221 x 62mm, Dark box/180 x 180 x 200mm, Dark box hole diameter: f50mm
• Weight: Approx 3.0kg
• Size when in use (mm): 205 x 221 x 262
• *Photographing device such as a digital camera is not included.
• Model number: KCS-1
• Device to photograph colonies in simplified method.
• Possible to also used as light board by removing dark box.
$0
Ultra-Fine K Thermocouple DS-1010 50
AS ONE Corporation
• Model number: DS-1010 50
• Sheath size: f0.5 x 50mm
• Type: Without lead wire
• Material: Sheath part/stainless steel (SUS316), Lead wire/nickel plating, teflon (R) coating
• Temperature range: -50 to +600?
• Lead wire length: 2m
• Sheath type, with connector
• Sheath part is thin and usable in small gap.
$0
Ultra-Fine K Thermocouple DS-1010 100
AS ONE Corporation
• Model number: DS-1010 100
• Sheath size: f0.5 x 100mm
• Type: Without lead wire
• Material: Sheath part/stainless steel (SUS316), Lead wire/nickel plating, teflon (R) coating
• Temperature range: -50 to +600?
• Lead wire length: 2m
• Sheath type, with connector
• Sheath part is thin and usable in small gap.
$0
Ultra-Fine K Thermocouple DS-1010 150
AS ONE Corporation
• Model number: DS-1010 150
• Sheath size: f0.5 x 150mm
• Type: Without lead wire
• Material: Sheath part/stainless steel (SUS316), Lead wire/nickel plating, teflon (R) coating
• Temperature range: -50 to +600?
• Lead wire length: 2m
• Sheath type, with connector
• Sheath part is thin and usable in small gap.
$0
Ultra-Fine K Thermocouple DS-1010 200
AS ONE Corporation
• Model number: DS-1010 200
• Sheath size: f0.5 x 200mm
• Type: Without lead wire
• Material: Sheath part/stainless steel (SUS316), Lead wire/nickel plating, teflon (R) coating
• Temperature range: -50 to +600?
• Lead wire length: 2m
• Sheath type, with connector
• Sheath part is thin and usable in small gap.
$0
Ultra-Fine K Thermocouple DS-1010 300
AS ONE Corporation
• Model number: DS-1010 300
• Sheath size: f0.5 x 300mm
• Type: Without lead wire
• Material: Sheath part/stainless steel (SUS316), Lead wire/nickel plating, teflon (R) coating
• Temperature range: -50 to +600?
• Lead wire length: 2m
• Sheath type, with connector
• Sheath part is thin and usable in small gap.
$0