Water Bath
Antibacterial Anti-Algae And Anti-Rust Agent (KENIFINE(TM) )
AS ONE Corporation
• Material: Nickel alloy
• Quantity: 1 piece
• Corresponding water volume (L): 50
• Size (mm): 200 x 160
• contents amount (g): 15
• KENIFINE (TM)
• * KENIFINE (TM) is a registered trademark of Kobe Steel Corporation. Manufactured by manufacturers who introduced the company's technology
• Model Number: L
• By just putting in water, antibacterial, anti-algae and mildew-proof effect will last for long time.
• It restricts propagation of bacteria and thus contributes to water saving and electric power saving.
$0
Sink
AS ONE Corporation
• Body material: Stainless steel (SUS430)
• Discharge water port: 1 port, 15A
• Supply water connection port: 15A female screw
• Chamber dimensions: 820 x 460 x 220mm
• With level adjuster (made of SUS)
• Outer dimension (mm): 900 x 600 x 900
• Weight (kg): Approximately 36
• Foot pedal type
• *In taking water, use a 15A male screw for water intake.
• Model number: FS-W900-430
• Water will be supplied only while the pedal is pushed down.
• Tood pedal can be moved to convenient position.
• Area around spout is kept clean since you can get water without using hands.
$0
Sink
AS ONE Corporation
• Body material: Stainless steel (SUS430)
• Discharge water port: 1 port, 15A
• Supply water connection port: 15A female screw
• Chamber dimensions: 1120 x 460 x 220mm
• With level adjuster (made of SUS)
• Outer dimension (mm): 1200 x 600 x 900
• Weight (kg): About 46
• Foot pedal type
• *In taking water, use a 15A male screw for water intake.
• Model number: FS-W1200-430
• Water will be supplied only while the pedal is pushed down.
• Tood pedal can be moved to convenient position.
• Area around spout is kept clean since you can get water without using hands.
$0
Water Tank for Observation, Acrylic Flat Type (200 x 60)
AS ONE Corporation
• main body material: PMMA (acrylic)
• plate thickness: 5 mm
• Weight: About 0.7 kg
• Warm in water resistance: 50 ? C
• capacity (L): about 1.8
• external dimension (mm): 200 x 60 x 200
• inner size (mm): 190 x 50 x 195
• Model Number: Flat (200 x 60)
• Thin and easy-to-carry design allows to observe samples without damaging them.
• Available for not only observation under water,but also for insects or observation underground.
$0
Water Tank for Observation, Acrylic Flat Type (300 x 80)
AS ONE Corporation
• main body material: PMMA (acrylic)
• plate thickness: 5 mm
• Weight: About 1.6 kg
• Warm in water resistance: 50 ? C
• capacity (L): about 6.0
• external dimension (mm): 300 x 80 x 300
• inner size (mm): 290 x 70 x 295
• Model Number: Flat (300 x 80)
• Thin and easy-to-carry design allows to observe samples without damaging them.
• Available for not only observation under water,but also for insects or observation underground.
$0
Crucible (Thermal Shock-Resistant Alumina Titanate) Cover f60mm
AS ONE Corporation
• Model number: TAL-01
• Lid
• Material: Special alumina titanate
• Size: f60 (thickness 7) mm
• These heat-resistant crucibles are not damaged even if immersed into water at ordinary temperature after heated to as high as 1,200? ten times or more continuously.
• cover TAL-01 can be used with body (TAL-02?03).
$0
Crucible (Thermal Shock-Resistant Alumina Titanate) f60 x 35mm
AS ONE Corporation
• Model number: TAL-02
• Body:
• Material: Special alumina titanate
• Size: f60 x 35mm
• These heat-resistant crucibles are not damaged even if immersed into water at ordinary temperature after heated to as high as 1,200? ten times or more continuously.
• cover TAL-01 can be used with body (TAL-02?03).
$0
Crucible (Thermal Shock-Resistant Alumina Titanate) f60 x 50mm
AS ONE Corporation
• Model number: TAL-03
• Body:
• Material: Special alumina titanate
• Size: f60 x 50mm
• These heat-resistant crucibles are not damaged even if immersed into water at ordinary temperature after heated to as high as 1,200? ten times or more continuously.
• cover TAL-01 can be used with body (TAL-02?03).
$0
Crucible (Thermal Shock-Resistant Alumina Titanate) f78 x 60mm
AS ONE Corporation
• Model number: TAL-04
• Body:
• Material: Special alumina titanate
• Size: f78 x 60mm
• These heat-resistant crucibles are not damaged even if immersed into water at ordinary temperature after heated to as high as 1,200? ten times or more continuously.
• cover TAL-01 can be used with body (TAL-02?03).
$0
Duckboard for Water Bath
AS ONE Corporation
• External dimensions: f170 x 45mm
• Material: Stainless steel (SUS304)
• Model number: Duckboard
$0
Square Water Bath 6L
AS ONE Corporation
• temperature settings range: R.T. + 5 to 90 ? C
• tank inner capacity: 300 x 155 x 150 mm (6L)
• external dimension: 327 x 178 x 280 mm
• Heater capacity: 500 W
• material: water tank / stainless steel (SUS304), main body / steel powder coating
• Function: Liquid temperature expansion temperature rise prevention device, timer (1 minute to 99 hours 59 minutes)
• power supply: 110 VAC, 50 / 60Hz
• Weight: 4.6 kg
• Accessories: Lid (Flat Type)
• * If used above 80 ? C, use the supplied Lid or optional gable Lid
• Model Number: SWB-6 A
• Microcomputer PID control enables temperature setting in unit of 0.1? within range from room temperature+5?~90?.
• Independent overtemperature prevention function allows temperature setting.
• Square water bath reduces loss, and is easy to handle.
• Drainboard is provided as standard equipment so that samples do not directly touch the heater and sensor. Flat cover required at high temperature is provided as standard equipment.
$0
Square Water Bath 11L
AS ONE Corporation
• temperature settings range: R.T. + 5 to 90 ? C
• tank inner capacity: 300 x 240 x 150 mm (11 L)
• external dimension: 327 x 265 x 280 mm
• Heater capacity: 700 W
• material: water tank / stainless steel (SUS304), main body / steel powder coating
• Function: Liquid temperature expansion temperature rise prevention device, timer (1 minute to 99 hours 59 minutes)
• power supply: 110 VAC, 50 / 60Hz
• Weight: 5.3 kg
• Accessories: Lid (Flat Type)
• * If used above 80 ? C, use the supplied Lid or optional gable Lid
• Model Number: SWB-11 A
• Microcomputer PID control enables temperature setting in unit of 0.1? within range from room temperature+5?~90?.
• Independent overtemperature prevention function allows temperature setting.
• Square water bath reduces loss, and is easy to handle.
• Drainboard is provided as standard equipment so that samples do not directly touch the heater and sensor. Flat cover required at high temperature is provided as standard equipment.
$0
Square Water Bath 22L
AS ONE Corporation
• temperature settings range: R.T. + 5 to 90 ? C
• tank inner capacity: 500 x 295 x 150 mm (22 L)
• external dimension: 500 x 295 x 150 mm
• Heater capacity: 1400 W
• material: water tank / stainless steel (SUS304), main body / steel powder coating
• Function: Liquid temperature expansion temperature rise prevention device, timer (1 minute to 99 hours 59 minutes)
• power supply: 110 VAC, 50 / 60Hz
• Weight: 8.4 kg
• Accessories: Lid (Flat Type)
• * If used above 80 ? C, use the supplied Lid or optional gable Lid
• Model Number: SWB-22 A
• Microcomputer PID control enables temperature setting in unit of 0.1? within range from room temperature+5?~90?.
• Independent overtemperature prevention function allows temperature setting.
• Square water bath reduces loss, and is easy to handle.
• Drainboard is provided as standard equipment so that samples do not directly touch the heater and sensor. Flat cover required at high temperature is provided as standard equipment.
$0
Small Heat Press Machine (With Cooling Function) 0 - 1T
AS ONE Corporation
• Model number: HC300-01
• Weighted (t): 0 - 1
• Size (mm): 495 x 430 x 500
• Weight (kg): Approx 63
• Hot plate size: 200 x 150mm
• Hot plate stroke: 0 - 90mm
• Heating temperature: Highest temperature 300?
• Heater capacity: 660W/heating plate x 2 sheets
• Temperature adjustment: PID type
• With pressure gauge left needle, analog display
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (with 3P plug)
• *This product is water cooling type, but the machine itself cannot cool down . Please use by circulating tap water or cooling water.
• *it cannot hold pressure for long hours.
• *Pressure is recommended for use in 50% or more of the largest value.
• Equipped with cooling functions, this hot press is convenient for molding operations.
• Capable of cooling samples and dies through the circulation of cooling water or tap water after heating and molding operations.
• The temperature of the upper and lower hot plates can be separately adjusted.
• Capable of manufacturing plastic sheets and molding samples.
• Suitable for heating compression molding tests of various materials.
• Driven by hydraulic pressure, it ensures easy weight application.
• The peak hold pressure gauge with two pointers allows you to check the applied pressure.
$0
Small Heat Press Machine (With Cooling Function) 0 - 5T
AS ONE Corporation
• Model number: HC300-05
• Weighted (t): 0 - 5
• Size (mm): 470 x 460 x 530
• Weight (kg): 65
• Hot plate size: 200 x 150mm
• Hot plate stroke: 0 - 90mm
• Heating temperature: Highest temperature 300?
• Heater capacity: 660W/heating plate x 2 sheets
• Temperature adjustment: PID type
• With pressure gauge left needle, analog display
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (with 3P plug)
• *This product is water cooling type, but the machine itself cannot cool down . Please use by circulating tap water or cooling water.
• *it cannot hold pressure for long hours.
• *Pressure is recommended for use in 50% or more of the largest value.
• Equipped with cooling functions, this hot press is convenient for molding operations.
• Capable of cooling samples and dies through the circulation of cooling water or tap water after heating and molding operations.
• The temperature of the upper and lower hot plates can be separately adjusted.
• Capable of manufacturing plastic sheets and molding samples.
• Suitable for heating compression molding tests of various materials.
• Driven by hydraulic pressure, it ensures easy weight application.
• The peak hold pressure gauge with two pointers allows you to check the applied pressure.
$0
Small Heat Press Machine (With Cooling Function) 1 - 15T
AS ONE Corporation
• Model number: HC300-15
• Weighted (t): 1 - 15
• Size (mm): 475 x 460 x 615
• Weight (kg): Approx 80
• Hot plate size: 200 x 150mm
• Hot plate stroke: 0 - 90mm
• Heating temperature: Highest temperature 300?
• Heater capacity: 660W/heating plate x 2 sheets
• Temperature adjustment: PID type
• With pressure gauge left needle, analog display
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m (with 3P plug)
• *This product is water cooling type, but the machine itself cannot cool down . Please use by circulating tap water or cooling water.
• *it cannot hold pressure for long hours.
• *Pressure is recommended for use in 50% or more of the largest value.
• Equipped with cooling functions, this hot press is convenient for molding operations.
• Capable of cooling samples and dies through the circulation of cooling water or tap water after heating and molding operations.
• The temperature of the upper and lower hot plates can be separately adjusted.
• Capable of manufacturing plastic sheets and molding samples.
• Suitable for heating compression molding tests of various materials.
• Driven by hydraulic pressure, it ensures easy weight application.
• The peak hold pressure gauge with two pointers allows you to check the applied pressure.
$0
Heat Resistant Silicone Oil For Oil Bath 15kg
AS ONE Corporation
• Heat resistance: 40 to + 300 ?C
• Flash point: 342 ?C
• Color: Light yellow Transparent
• Viscosity (25 ?C): 100cSt
• contents amount (kg): 15
$0
Ion Exchange Water Producing Device LABWATER1 Replacement Cartridge
AS ONE Corporation
• Volume of collecting water (per 1 cartridge): 160L
• Replacement cartridge for LABWATER1
• Quantity: 1 piece
• LABWATER
• Model number: D340
• Possible to produce ion-exchanged water only with tap water supply pressure, without need for electrical power.
• Ion-exchanged water can be provided by pulling trigger of dispensing gun.
• Possible to check quality of water with change in color of window(1*u*S/*cm*, 10*u*S/*cm*)
$0
Purified Water for Industrial Use
AS ONE Corporation
• Size: 300 x 300 x 300mm
• Material: Exterior/cardboard, Interior, cap, cock/PE (polyethylene)
• JIS K 0557: A2 equivalent
• With cock
• Capacity (L): 20
• *Expiration date: 1 year from the manufacturing day
• Model number: A300
• Water purified with water purification apparatus.
$0
Duckboard For Large Water Bath BWB-300
AS ONE Corporation
• Specification: BWB -300 only duckboard
• Outer dimensions (mm): f250 x 35
• Main unit material : Stainless steel SUS304
$0