Support Rods

• Model number: Support rod (f6 x 350mm)

• Model number: Support clamp
• For external temperature sensor

• Body
• Commutator motor: 100VAC 60W
• Rotation speed: 5000 - 9000rpm (at no load)
• Power supply: 100VAC 50/60Hz
• Support arm size: f16 x 150mm
• Size: 125 x 160 x 350mm
• Weight: 3.5kg
• Model number: HK-1
• Accessories: Foot switch, f6mm color sleeve x 1 piece each, Guide pin bushing x 1 piece, Chuck handle x 1 piece
• *Homogenizer, stand, clamp are not included in the package. *Please check available products for the homogenizer, Before placing an order.
• Both hands to be free If you use the foot switch, continuous work is possible.
• Because It is combination of sleeve bearing, can be stirred to ensure load it takes.

• Seat part: PU (polyurethane), solid casting
• Leg: Steel coating finish
• Up-and down method: Gas cylinder type
• Weight: Approx 9kg
• Sitting height (mm): 650 - 800
• Model number: ERC-1
• Seat is made of integrally molded polyurethane foam that has good resistance to scratches and stains. It is suitable for use in laboratories or work sites.
• High seating height makes this chair suitable both as supporter for standing work and chair for sitting down.
• For sitting down, it is recommended to use ERC-1 with large seating face and lumbar support. As support for standing work, it is recommended to use ERC-2 that is easy to lean back on.

• Seat part: PU (polyurethane), solid casting
• Leg: Steel coating finish
• Up-and down method: Gas cylinder type
• Weight approx 8kg
• Sitting height (mm): 650 - 800
• Model number: ERC-2
• Seat is made of integrally molded polyurethane foam that has good resistance to scratches and stains. It is suitable for use in laboratories or work sites.
• High seating height makes this chair suitable both as supporter for standing work and chair for sitting down.
• For sitting down, it is recommended to use ERC-1 with large seating face and lumbar support. As support for standing work, it is recommended to use ERC-2 that is easy to lean back on.

• Model number: Support rod (f6 x 350mm)

• Model number: ML-16
• Unclutched fixed type
• adaptive pipe diameter (mm): f 9.5 to f 16
• Material: zinc alloy die cast (hard chrome plating)
• Fixed type can be quartered to support rod.
• Rotary type can be placed at any direction desired by rotating 360? to support rod.
• Possible to choose type with tab or without tab, according to weight of objects etc.

• Model number: MNNL-16
• A fixed fixed type
• adaptive pipe diameter (mm): f 9.5 to f 16
• Material: zinc alloy die cast (hard chrome plating)
• Fixed type can be quartered to support rod.
• Rotary type can be placed at any direction desired by rotating 360? to support rod.
• Possible to choose type with tab or without tab, according to weight of objects etc.

• Model number: MNR-16
• rotation type with nails
• adaptive pipe diameter (mm): f 9.5 to f 16
• Material: zinc alloy die cast (hard chrome plating)
• Fixed type can be quartered to support rod.
• Rotary type can be placed at any direction desired by rotating 360? to support rod.
• Possible to choose type with tab or without tab, according to weight of objects etc.

• Model number: MR-18
• rotation type without nails
• adaptive pipe diameter (mm): f 9.5 to f 18
• Material: zinc alloy die cast (hard chrome plating)
• Fixed type can be quartered to support rod.
• Rotary type can be placed at any direction desired by rotating 360? to support rod.
• Possible to choose type with tab or without tab, according to weight of objects etc.

• Model number: MST-19 T
• adaptive pipe diameter (mm): Maximum f 19
• Material: zinc alloy die cast
• T-shaped fixing screw facilitates tightening.
• Clamp rod can be attached at right angle to support rod.
• Due to provided support, MRA-19T can fix heavy load, flat plate, and panel with thickness of up to 19*mm*.
• MOS-29T with different opening dia. is compatible with large dia. objects, and easy to use.

• Model number: MRA-19 T
• adaptive pipe diameter (mm): Maximum f 19
• Material: zinc alloy die cast
• T-shaped fixing screw facilitates tightening.
• Clamp rod can be attached at right angle to support rod.
• Due to provided support, MRA-19T can fix heavy load, flat plate, and panel with thickness of up to 19*mm*.
• MOS-29T with different opening dia. is compatible with large dia. objects, and easy to use.

• Model number: MOS-29T
• Applicable pipe diameter (mm): f9.5 - 29?f9.5 - 23
• Material: Aluminum alloy die casting (body), Stainless Steel knob bolt (screw part)
• T-shaped fixing screw facilitates tightening.
• Clamp rod can be attached at right angle to support rod.
• Due to provided support, MRA-19T can fix heavy load, flat plate, and panel with thickness of up to 19*mm*.
• MOS-29T with different opening dia. is compatible with large dia. objects, and easy to use.

• Model number: N-360R?OW
• Type: Hinged double doors
• Outer dimension (mm): 880 x 380 x 1790
• Effective inner dimension (mm): 810 x 355 x 1645
• Material: Steel (powder coating)
• Width: 830mm
• Hole pitch of shelf support: 30mm
• Shelf board load capacity: 30kg/piece
• Weight: 43.4kg
• With key
• Accessories: Shelf board x 4
• *A stop bar is not included.

• Model number: N-330R?OW
• Type: Hinged double doors
• Outer dimension (mm): 880 x 380 x 880
• Effective inner dimension (mm): 810 x 355 x 735
• Material: Steel (powder coating)
• Width: 830mm
• Hole pitch of shelf support: 30mm
• Shelf board load capacity: 30kg/piece
• Weight: 23.5kg
• With key
• Accessories: Shelf board x 2
• *A stop bar is not included.

• Model number: N-230R?OW
• Type: Single door
• Outer dimension (mm): 515 x 380 x 880
• Effective inner dimension (mm): 445 x 355 x 735
• Material: Steel (powder coating)
• Width: 465mm
• Hole pitch of shelf support: 30mm
• Shelf board load capacity: 20kg/piece
• Weight: 20.0kg
• With key
• Accessories: Shelf board x 2
• *A stop bar is not included.

• Material: PP (polypropylene)
• Shelf board load capacity: 60kg
• Shelf spacing: 380mm
• Accessories: Wall mounting brace x 4 pieces, Horizontal connection brace x 4 pieces
• Weight: Approx 11.5kg
• Width x depth x height (mm): 900 x 450 x 1820
• Number of shelves installation: 5
• Tribac
• Model number: 9933000 002203
• Drawer(optional:2-9760-01?02) can be added to use for various purposes.
• Possible to easily assembled by inserting support poles and shelves.
• Possible to arranged in 5 shelves in longitudinal direction, or 2 shelves and 3 shelves in lateral direction.

• Model number: Fittings for support rod
• Insulation board is placed on stainless steel top plate, which enables stirring while oil bath is placed on it.
• With strong magnet and induction motor, possible to stir high viscosity and large capacity liquid.
• Feedback control by tacho generator, provides stable rotation from low speed to high speed.
• It provides stable rotation even in low rotation speed range.
• Adjustment dial is analog type that can set speed in proportion to dial scale.
• Dedicated fixing bracket can be attached on the back side, and by combining with support rod, it can be used as stand.

• Model number: Support rod (f16 x 450mm)
• Main unit size (mm): Support rod (f16 x 450mm)
• Top board size (mm): Support rod (f16 x 450mm)
• Insulation board is placed on stainless steel top plate, which enables stirring while oil bath is placed on it.
• With strong magnet and induction motor, possible to stir high viscosity and large capacity liquid.
• Feedback control by tacho generator, provides stable rotation from low speed to high speed.
• It provides stable rotation even in low rotation speed range.
• Adjustment dial is analog type that can set speed in proportion to dial scale.
• Dedicated fixing bracket can be attached on the back side, and by combining with support rod, it can be used as stand.