Desiccator
Auto Dry Desiccator Caster Specification
AS ONE Corporation
• Auto dry type
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Shelf board/stainless steel (SUS430)
• Knob for moving: It can be attached to the left and right frame at the top of the aluminum frame
• Dehumidification system: H2O electric decomposition discharge (using solid high polymer electrolyte membrane)
• Reaching humidity: Approximately 15%RH (after 12 hours, with no internal load, depending on the usage environment)
• Shelf board dimensions: 268 x 256 x 10mm
• Shelf board mounting pitch: 100mm (shelf rest position fixed) x 4 stages
• Shelf board load capacity: Approximately 5kg/board
• Total withstand load: Approx 10kg
• Door specification: Draw latch type
• Caster: F40mm Nylon made (with stopper)
• Power supply: AC100V 50/60Hz 4W
• Power cord length: Approximately 2m (2P plug)
• Body weight: 7.6kg
• Accessories: Shelf board x 2 (SUS430), knob for moving x 1
• Model number: SP-UTK
• Caster specification
• Size (mm): 302 x 318 x 600 (*The size excludes projections. )
• UT-Lab.
• *Temperature and humidity meter is not included.
• Inside of body is highly airtight.
• Select rubber-foot type for installation on desktop or floor surface.Select caster type for installation under lab bench or movement for each sample.
• This desiccator directly decomposes moisture inside chamber by electric current, and continuously removes it for stable dehumidification.
$0
Auto Dry Desiccator UT - Preliminary Shelves
AS ONE Corporation
• Material: Stainless steel (SUS430)
• Dimensions: 268 x 256 x 10mm
• Withstand load: Approximately 5kg/board
• Model number: UT-spare shelf board
$0
Mini Vacuum Container f150 x 220mm
AS ONE Corporation
• main body material: Transparent Enhanced PMMA (acrylic)
• Incoming vacuum: Approximately 0.067 MPa (Gauge pressure and hand pumps use)
• Allowable vacuum: about 133 Pa
• Accessories: Vacuum Gauge Hand pumps
• Model number: VCP-15 L
• external dimension (mm): f 150 x 220 * exclusion gauge
• Capacity: about 1.5
• This desiccator with small hand pump can easily create vacuum environment in vessel.
• This desiccator does not require a power supply. Possible to acquire samples in field, and store them in the vacuum state.
$0
Mini Vacuum Container f150 x 320mm
AS ONE Corporation
• main body material: Transparent Enhanced PMMA (acrylic)
• Incoming vacuum: Approximately 0.067 MPa (Gauge pressure and hand pumps use)
• Allowable vacuum: about 133 Pa
• Accessories: Vacuum Gauge Hand pumps
• Model number: VCP-30 L
• external dimension (mm): f 150 x 320 * exclusion gauge
• Capacity: about 3.0
• This desiccator with small hand pump can easily create vacuum environment in vessel.
• This desiccator does not require a power supply. Possible to acquire samples in field, and store them in the vacuum state.
$0
Air Dryer
AS ONE Corporation
• Model number: AD-0001
• Main unit size (mm): 210 x 270 x 198
• for Glove box
• Processing air amount: Approximately 7L/min
• Silica gel cylinder: f30 x 200mm x 3 volumes
• Connection urethane tube: f8mm x 1m x 2 pieces
• Power supply: AC100V 50/60Hz
• Tube connector: Rc1/4 for Glove box connecting, Rc1/8 x 2 pieces included
• Air pump makes air inside of glove box circulate through silica gel cylinders to keep glove box dry.
• This product can be connected easily to glove box and desiccator, with urethane tubes.
$0
Accessories for Desiccator Valve
AS ONE Corporation
• Model number: IN Valve
• For Outer diameter f 6mm tube (R1/4)
• Material: Body/PBT (Polybutylene terephthalate), Internal and connection portion/Yellow Copper and No electrolytic Nickel plating
$0
Accessories for Desiccator Valve
AS ONE Corporation
• Model number: OUT Valve
• For Outer diameter f 8mm tube (R1/4)
• Material: Body/PBT (Polybutylene terephthalate), Internal and connection portion/Yellow Copper and No electrolytic Nickel plating
$0
Accessories for Desiccator Thermo-Hygrometer
AS ONE Corporation
• Model number: Thermo-hygrometer
$0
Desiccator Accessory Slide Rail Shelf Board
AS ONE Corporation
• Material: Stainless steel (SUS430)
• Shelf board load capacity: 15kg
• Model number: Slide rail shelf board (466 x 460mm)
$0
Shelf Board for Desiccator, Short
AS ONE Corporation
• Size (mm): 490 x 400
• Model number: Spare shelf board (short type)
• *Shelf board specifically designed for dry unit part of SP series desiccator.
$0
Desiccator for SPB-2 Fixed Shelf Board
AS ONE Corporation
• Material: Steel plate
• Withstand load: Approximately 40kg/sheet (uniform distribution load)
• Shelf board dimensions: 856 x 400mm
• Model number: Spare shelf board for DCD-SSP2/fixed shelf board for DG-2N
$0
Desiccator (Auto Dry) 450 x 400 x 900mm
AS ONE Corporation
• Auto Dry Type
• External dimensions (mm): 450 x 400 x 900
• Internal dimensions (mm): 410 x 365 x 840
• Dehumidification method: Electrolytic discharge of H2O by solid polymer electrolyte membrane
• Humidity setting range: not settable
• Humidity control range (*): approximately 20% RH (reached humidity) * At no load in the chamber, depending on the specification environment
• Material: Body/Steel Plate Melamine Baked Coating, Front/Glass
• Power supply: AC100V 50/60Hz
• Power cord length: about 1.8 m
• Power consumption: about 6W
• Caster: None
• Weight: 24kg
• Shelf Board Specifications: Load capacity/approx. 40kg/sheet (with uniform distribution load), mounting pitch/60 mm
• Accessories: 2 shelves, digital temperature and humidity monitor (THA-01M)
• Equipped with new solid polymer electrolyte membrane on front panel and directly electrolyzes moisture in air of refrigerator and continuously removes moisture.
• Left door has latch-type key in top and bottom and right door has general rotary key.
• There is no pillar in opening center of SPB-V2?V4, easy to get wide storage in and out.
$0
Desiccator (Auto Dry) 900 x 400 x 900mm
AS ONE Corporation
• Auto Dry Type
• External dimensions (mm): 900 x 400 x 900
• Internal dimensions (mm): 860 x 365 x 840
• Dehumidification method: Electrolytic discharge of H2O by solid polymer electrolyte membrane
• Humidity setting range: not settable
• Humidity control range (*): approximately 25% RH (reached humidity) * At no load in the chamber, depending on the specification environment
• Material: Body/Steel Plate Melamine Baked Coating, Front/Glass
• Power supply: AC100V 50/60Hz
• Power cord length: about 1.8 m
• Power consumption: about 6W
• Caster: None
• Weight: 36kg
• Shelf Board Specifications: Load capacity/approx. 40kg/sheet (with uniform distribution load), mounting pitch/60 mm
• Accessories: 2 shelves, digital temperature and humidity monitor (THA-01M)
• Equipped with new solid polymer electrolyte membrane on front panel and directly electrolyzes moisture in air of refrigerator and continuously removes moisture.
• Left door has latch-type key in top and bottom and right door has general rotary key.
• There is no pillar in opening center of SPB-V2?V4, easy to get wide storage in and out.
$0
Desiccator (Auto Dry) 600 x 550 x 1700mm
AS ONE Corporation
• Auto Dry Type
• External dimensions (mm): 600 x 550 x 1700
• Internal dimensions (mm): 560 x 515 x 1515
• Dehumidification method: Electrolytic discharge of H2O by solid polymer electrolyte membrane
• Humidity setting range: 20 ~ 80% RH
• Humidity control range (*): About 20% RH Indoor humidity * At no load in the chamber, depending on the specification environment
• Material: Body/Steel Plate Melamine Baked Coating, Front/Glass
• Power supply: AC100V 50/60Hz
• Power cord length: about 2.5 m
• Power consumption: about 5W
• Caster: 100 mm in diameter, made of hard rubber (with 2 stoppers)
• Weight: 54kg
• Shelf Board Specifications: Load capacity/approx. 40kg/sheet (with uniform distribution load), mounting pitch/60 mm
• Accessories: 3 shelves, digital temperature and humidity monitor (THA-01M)
• Casters: Yes
• ?* Wooden packaging (wooden frame, pallet, etc.) is used.
• Equipped with new solid polymer electrolyte membrane on front panel and directly electrolyzes moisture in air of refrigerator and continuously removes moisture.
• Left door has latch-type key in top and bottom and right door has general rotary key.
• There is no pillar in opening center of SPB-V2?V4, easy to get wide storage in and out.
$0
Desiccator (Auto Dry) 1200 x 550 x 1700mm
AS ONE Corporation
• Auto Dry Type
• External dimensions (mm): 1200 x 550 x 1652
• Internal dimensions (mm): 1160 x 515 x 1515
• Dehumidification method: Electrolytic discharge of H2O by solid polymer electrolyte membrane
• Humidity setting range: 20 ~ 80% RH
• Humidity control range (*): About 30% RH Indoor humidity * At no load in the chamber, depending on the specification environment
• Material: Body/Steel Plate Melamine Baked Coating, Front/Glass
• Power supply: AC100V 50/60Hz
• Power cord length: about 2.5 m
• Power consumption: about 5W
• Caster: 50 mm in diameter, made of hard rubber (with 2 stoppers)
• Weight: 102 kg
• Shelf Board Specifications: Load capacity/approx. 40kg/sheet (with uniform distribution load), mounting pitch/60 mm
• Accessories: 3 shelves, digital temperature and humidity monitor (THA-01M)
• Casters: Yes
• ?* Wooden packaging (wooden frame, pallet, etc.) is used.
• Equipped with new solid polymer electrolyte membrane on front panel and directly electrolyzes moisture in air of refrigerator and continuously removes moisture.
• Left door has latch-type key in top and bottom and right door has general rotary key.
• There is no pillar in opening center of SPB-V2?V4, easy to get wide storage in and out.
$0
Vacuum Desiccator
AS ONE Corporation
• Material: Main body / transparent reinforced PMMA (acrylic) (plate thickness: 20 mm), valve vacuum gauge mounting / PC (polycarbonate)
• Allowable vacuum: 1 Torr (about 133 Pa)
• Weight: 8.6 kg
• The length of power cord: about 2.9 m (3P Plug)
• Model Number: VM
• external dimension (mm): 250 x 250 x 380
• inner size (mm): 210 x 210 x 210
• No outlet
• Accessories: vacuum gauge ? 1 piece, vacuum valve: Small / outer diameter f8 mm Large / f 14 mm (Each 1 piece)
• Recommended vacuum pumps: Dry vacuum pumps DTC-22, (1-671-06) Dry vacuum pumps DA-20 D (1-4148-11)
• * Including valve cells.
• Silicon packing having high sealing performance, and grease is not required.
• VM-C equips socket inside of box and switch outside of box.
$0
Vacuum Desiccator with Outlet
AS ONE Corporation
• Material: Main body / transparent reinforced PMMA (acrylic) (plate thickness: 20 mm), valve vacuum gauge mounting / PC (polycarbonate)
• Allowable vacuum: 1 Torr (about 133 Pa)
• Outlet inside: AC100V 15 A3 Px 1 x 1 piece
• Weight: 8.6 kg
• power supply switch: toggle switch x 1 piece
• The length of power cord: about 2.9 m (3P Plug)
• Type number: VM-C type
• external dimension (mm): 250 x 250 x 380
• inner size (mm): 210 x 210 x 210
• With outlet
• Accessories: vacuum gauge ? 1 piece, vacuum valve: Small / outer diameter f8 mm Large / f 14 mm (Each 1 piece)
• Recommended vacuum pumps: Dry vacuum pumps DTC-22, (1-671-06) Dry vacuum pumps DA-20 D (1-4148-11)
• * Including valve cells.
• Silicon packing having high sealing performance, and grease is not required.
• VM-C equips socket inside of box and switch outside of box.
$0
Vacuum Desiccator 150 x 150 x 150mm
AS ONE Corporation
• Material: Main body / transparent reinforced PMMA (Acrylic Plastic), valve vacuum mounting unit / PC (polycarbonate)
• Capacity: about 1.3 L
• Allowable vacuum: 1 Torr (about 133 Pa)
• Weight: 3.7 kg
• Accessories: vacuum gauge ? 1 piece vacuum valve (outer diameter f 14 mm)
• Model number: VXS
• Size (mm): 150 x 150 x 150
• inner size (mm): 110 x 110 x 110
• Recommended vacuum pumps: (1-9197-01) Dry vacuum pumps DAP-6 D, (1-4148-11) Dry vacuum pumps DTC-22
• * The size is excluded from the projection.
• Highly-sealable silicon packing is used.
• Suitable for experiment with small mount of samples.
$0
Vacuum Desiccator 150 x 150 x 250mm
AS ONE Corporation
• Material: Main body / transparent reinforced PMMA (acrylic), valve vacuum mounting unit / PC (polycarbonate)
• Capacity: about 1.3 L
• Allowable vacuum: about 133 Pa
• Weight: 4.8 kg
• Accessories: vacuum gauge ? 1 piece vacuum valve (outer diameter f 14 mm) ? 1 piece
• external dimension (mm): 150 x 150 x 250
• inner size (mm): 110 x 110 x 210
• * The size is excluded from the projection
• Recommended vacuum pumps: (1-9197-01) Dry vacuum pumps DAP-6 D, (1-4148-11) Dry vacuum pumps DTC-22
• Model Number: VXH
• Highly-sealable silicon packing is used.
• Suitable for experiment with small mount of samples.
$0
Vacuum Desiccator 250 x 150 x 150mm
AS ONE Corporation
• Material: Main body / transparent reinforced PMMA (acrylic), valve vacuum mounting unit / PC (polycarbonate)
• Capacity: about 1.3 L
• Allowable vacuum: about 133 Pa
• Weight: 4.8 kg
• Accessories: vacuum gauge ? 1 piece vacuum valve (outer diameter f 14 mm) ? 1 piece
• external dimension (mm): 250 x 150 x 150
• inner size (mm): 210 x 110 x 110
• * The size is excluded from the projection
• Recommended vacuum pumps: (1-9197-01) Dry vacuum pumps DAP-6 D, (1-4148-11) Dry vacuum pumps DTC-22
• Model Number: VXL
• Highly-sealable silicon packing is used.
• Suitable for experiment with small mount of samples.
$0