Desiccator
Heavy Desiccator Auto Dry 574 x 600 x 1765mm
AS ONE Corporation
• Auto dry type
• Dehumidification system: H2O electric decomposition discharge using solid high polymer electrolyte membrane
• Humidity control range: Approximately 20%RH to chamber humidity (after 48h, with no internal load, depending on the usage environment)
• Humidity control: Dial automatic control type (relative humidity)
• Dehumidifying element available membrane area: 70 x 70mm
• Weight: 35kg
• Shelf board load capacity: Approximately 35kg/board
• Shelf board dimensions: 470 x 460mm
• Caster: F65mm Nylon (with stopper x 2)
• Body total withstand load: 140kg
• Power supply: AC100V 50/60Hz
• Power cord length: 3m (2P plug)
• Average power consumption: 5W
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Slide rail shelf/stainless steel (SUS430)
• Slide width: 300mm
• Shelf board mounting pitch: 50mm (shelf board spacing: 40mm)
• Accessories: Slide rail shelf x 4
• Model number: DHD-S
• Outer dimension (mm): 574 x 600 x 1765
• Inner dimension (mm): 560 x 483 x 1486
• The dehumidification stabilized since the humidity inside desiccator is electrolyzed directly and continuously removed using the solid polymer electrolyte film available for a dry unit.
• Equipped with adjuster, the stable installation is possible.
$0
Heavy Desiccator Auto Dry 1152 x 600 x 1765mm
AS ONE Corporation
• Auto dry type
• Dehumidification system: H2O electric decomposition discharge using solid high polymer electrolyte membrane
• Humidity control range: Approximately 20%RH to chamber humidity (after 48h, with no internal load, depending on the usage environment)
• Humidity control: Dial automatic control type (relative humidity)
• Dehumidifying element available membrane area: 70 x 70mm
• Weight: 67kg
• Shelf board load capacity: Approximately 35kg/board
• Shelf board dimensions: 470 x 460mm
• Caster: F65mm Nylon (with stopper x 2)
• Body total withstand load: 200kg
• Power supply: AC100V 50/60Hz
• Power cord length: 3m (2P plug)
• Average power consumption: 5W
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Slide rail shelf/stainless steel (SUS430)
• Slide width: 300mm
• Shelf board mounting pitch: 50mm (shelf board spacing: 40mm)
• Accessories: Slide rail shelf x 8, low humidity digital temperature and humidity meter (THI-HP)
• Model number: DHD-W
• Outer dimension (mm): 1152 x 600 x 1765
• Inner dimension (mm): 1138 x 483 x 1486
• The dehumidification stabilized since the humidity inside desiccator is electrolyzed directly and continuously removed using the solid polymer electrolyte film available for a dry unit.
• Equipped with adjuster, the stable installation is possible.
$0
Portable Desiccator Standard 400 x 317 x 338mm
AS ONE Corporation
• Standard specification, gas replacement
• Material: Body/PMMA (acrylic), Frame/aluminum
• Door: with draw latch
• Weight: 5.5kg
• Valve mounting screw: Rc1/4
• Outer dimensions: 400 x 317 x 338mm
• Inner dimension: 370 x 260 x 272mm
• Model number: Standard PL
• It is portable desiccator as carrying case.
• Auto dry type, dehumidification unit which uses solid polymer electrolyte film, electrolyzes the humidity in warehouse directly and removes it.
• Gas Replacement type has 2 valves mouting screws (gas replacement holes) for various accessories (sold separately).
• Static Electricity(SE) type uses conductive PVC.
$0
Portable Desiccator Standard 302 x 317 x 436mm
AS ONE Corporation
• Standard specification, gas replacement
• Material: Body/PMMA (acrylic), Frame/aluminum
• Door: with draw latch
• Weight: 5.6kg
• Shelf board: Size/270 x 257mm, Material/styrol, withstand load/about 2kg/stage
• Valve mounting screw: Rc1/4
• Outer dimensions: 302 x 317 x 436mm
• Inner dimension: 272 x 260 x 370mm
• Accessories: Shelf board x 1
• Model number: Standard PL
• It is portable desiccator as carrying case.
• Auto dry type, dehumidification unit which uses solid polymer electrolyte film, electrolyzes the humidity in warehouse directly and removes it.
• Gas Replacement type has 2 valves mouting screws (gas replacement holes) for various accessories (sold separately).
• Static Electricity(SE) type uses conductive PVC.
$0
Portable Desiccator Auto Dry 432 x 317 x 338mm
AS ONE Corporation
• Standard specification, auto dry
• Material: Body/PMMA (acrylic), Frame/aluminum
• Door: with draw latch
• Weight: 5.8kg
• Dehumidification system: Using solid high polymer electrolyte membrane, H2O electrolytic discharge
• Humidity control range: To 25% (varies depending on the surrounding environment. )
• Dehumidifying element area: 30 x 30mm
• Power supply: AC100-240V 50/60Hz
• Power consumption: 3W
• Power cord length: Approximately 1.8m (2P plug)
• Outer dimensions: 432 x 317 x 338mm
• Inner dimension: 370 x 260 x 272mm
• Model number: Auto dry PL
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• It is portable desiccator as carrying case.
• Auto dry type, dehumidification unit which uses solid polymer electrolyte film, electrolyzes the humidity in warehouse directly and removes it.
• Gas Replacement type has 2 valves mouting screws (gas replacement holes) for various accessories (sold separately).
• Static Electricity(SE) type uses conductive PVC.
$0
Portable Desiccator Auto Dry 334 x 317 x 436mm
AS ONE Corporation
• Standard specification, auto dry
• Material: Body/PMMA (acrylic), Frame/aluminum
• Door: with draw latch
• Weight: 5.9kg
• Shelf board: Size/270 x 257mm, Material/styrol, withstand load/about 2kg/stage
• Dehumidification system: Using solid high polymer electrolyte membrane, H2O electrolytic discharge
• Humidity control range: To 25% (varies depending on the surrounding environment. )
• Dehumidifying element area: 30 x 30mm
• Power supply: AC100-240V 50/60Hz
• Power consumption: 3W
• Power cord length: Approximately 1.8m (2P plug)
• Outer dimensions: 334 x 317 x 436mm
• Inner dimension: 272 x 260 x 370mm
• Accessories: Shelf board x 1
• Model number: Auto dry PH
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• It is portable desiccator as carrying case.
• Auto dry type, dehumidification unit which uses solid polymer electrolyte film, electrolyzes the humidity in warehouse directly and removes it.
• Gas Replacement type has 2 valves mouting screws (gas replacement holes) for various accessories (sold separately).
• Static Electricity(SE) type uses conductive PVC.
$0
Vacuum Desiccator (UV Blocker Type) 420 x 397 x 491mm
AS ONE Corporation
• Material: Body, shelf board/PC (polycarbonate), Silica gel plate/PP (polypropylene), Packing/Silicone rubber,
• Allowable vacuum degree: 1Torr (approx 133Pa)
• Withstand load (body): 100kg
• Withstand load (shelf): 5kg
• Vacuum valve diameter: f9mm
• Shelf board mounting spacing: 64.2mm
• Model number: VDC-41U
• UV cut type
• Outer dimension (mm): 420 x 397 x 491
• Inner dimension (mm): 280 x 310 x 395
• Weight (kg): 12.2
• Accessories: Silica gel plate x 1 plate, Plug x 2, Vacuum valve x 1 pieces, Vacuum gauge x 1 piece, Shelf board x 3
• It integrates high strength and high air-tightness.
• Since seamless silicon packing is attached to the door, it excels air-tightness and grease is not required.
• 1 valve can be attached to both left and right side.
• Stackable it on another.
•
• Possible to cut UV 400n*m* or less.
$0
Molding Vacuum Desiccator 300 x 287 x 325mm
AS ONE Corporation
• Material: PC (polycarbonate)
• Allowable vacuum: 1 Torr (about 133 Pa)
• number of shelves: 4 stages
• Capacity: Up to 13 L
• Weight: 7 kg
• Load tolerance: Body / approx. 50 kg, shelf board / approx. 5 kg
• Model number: MVD-100
• external dimension (mm): 300 x 287 x 325
• inner size (mm): 250 x 210 x 250
• Accessories: vacuum valves (f8 mm nipple base portion R 1/4) x 2 pieces, vacuum gauge x 1 piece, shelf board ? 2 pieces
• (1-4148-03) High vacuum diaphragm type dry vacuum pumps 2, 2 A 2 A DTC-41
• (1-4148-11) High Vacuum Diaphragm Type Dry vacuum pumps 1 DTC-22
• Sturdy and integrally PC (polycarbonate) molded.
• Silicon packing is used for seal part of door and body, and grease is not required.
• Vacuum gauge and valve are attached to both top surface and right side.
• MVD 300 can be used with stacking it on another.
$0
Built-In Pump Vacuum Desiccator
AS ONE Corporation
• Material: Desiccator portion/PC (polycarbonate), Lower pump room/steel baking coating
• Capacity: Approximately 9L
• Weight: 7.1kg
• Desiccator portion: Inner diameter/f245mm
• Vacuum pump: Vacuum attainment level/-75kPa, Exhaust gas flow rate/12L/min
• Power supply: AC100V 50/60Hz 0.8A
• Power cord length: 1m (2P plug)
• Accessories: Bottom plate for desiccator
• Model number: VE-ALL
• Outer dimension (mm): 298 x 298 x 492
• Economy type
• It is compact and easy to use without troublesome piping etc. by built-in oil-free dry air pump.
$0
Stainless Steel Desiccator 574 x 524 x 1770mm
AS ONE Corporation
• Auto Dry Type
• Dehumidification system: H2O electrolysis emission by a solid polymer electrolyte membrane
• Humidity setting range: 20 to 50 %RH
• Humidity control system: Automatic dial adjustment (relative humidity)
• Humidity control range: approx. 25 %RH to room humidity (In environment used at the time of unload)
• Material: Main body / stainless steel (SUS304), door / antistatic PMMA (acrylic) plate, frame / aluminum sash, shelf board / stainless (SUS430)
• The lower right side of the main body is equipped with a ground terminal 1 location (With 3m ground wire)
• shelf board Dimensions: 490 x 460 mm
• shelf board installed pitch: 50 mm
• shelf board interval : 40 mm
• shelf board Load tolerance: about 20 kg / sheet
• Custer: f 65 mm nylon (front wheel with stopper)
• power supply: AC100V 50 / 60Hz
• power cord: 3P plug approx. 2 m
• Average Power Consumption: 5W
• Weight: Main (Excluding shelf board) / 40 kg, shelf board / 1.5 kg / sheet
• Accessories: shelf board / 4 pieces, High Precision Digital thermo-hygrometer (THI-HP)
• Model number: SP-SSUSFN
• external dimension (mm): 574 x 524 x 1770
• inner size (mm): 560 x 483 x 1486
• Suitable for preventing static electricity in electronic parts and storing chemicals.
• Decomposes moisture inner cabinet electric current and removes it continuously using the new solid polymer electrode membrane (Rosarl*R*) provided on the front panel.
• Dead space inner desiccator is eliminated to achieve efficient use of space.
• New door opening/closing mechanism eliminates The dead space made during opening and closing. Possible to install this desiccator on The wall surface without clearance.
• Door which very air-tight magnetic packing is equipped, opens and closes smoothly.
$0
Stainless Steel Desiccator 1152 x 524 x 1770mm
AS ONE Corporation
• Auto Dry Type
• Dehumidification system: H2O electrolysis emission by a solid polymer electrolyte membrane
• Humidity setting range: 20 to 50 %RH
• Humidity control system: Automatic dial adjustment (relative humidity)
• Humidity control range: approx. 25 %RH to room humidity (In environment used at the time of unload)
• Material: Main body / stainless steel (SUS304), door / antistatic PMMA (acrylic) plate, frame / aluminum sash, shelf board / stainless (SUS430)
• The lower right side of the main body is equipped with a ground terminal 1 location (With 3m ground wire)
• shelf board Dimensions: 490 x 460 mm
• shelf board installed pitch: 50 mm
• shelf board interval : 40 mm
• shelf board Load tolerance: about 20 kg / sheet
• Custer: f 65 mm nylon (front wheel with stopper)
• power supply: AC100V 50 / 60Hz
• power cord: 3P plug approx. 2 m
• Average Power Consumption: 5W
• Weight: Main (Excluding shelf board) / 65 kg, shelf board / 1.5 kg / sheet
• Accessories: shelf board / 8 pieces, High Precision Digital thermo-hygrometer (THI-HP)
• Model number: SP-WSUSFN
• external dimension (mm): 1152 x 524 x 1770
• inner size (mm): 1138 x 483 x 1486
• Suitable for preventing static electricity in electronic parts and storing chemicals.
• Decomposes moisture inner cabinet electric current and removes it continuously using the new solid polymer electrode membrane (Rosarl*R*) provided on the front panel.
• Dead space inner desiccator is eliminated to achieve efficient use of space.
• New door opening/closing mechanism eliminates The dead space made during opening and closing. Possible to install this desiccator on The wall surface without clearance.
• Door which very air-tight magnetic packing is equipped, opens and closes smoothly.
$0
Standard Desiccator 574 x 517 x 1150 (1095) mm
AS ONE Corporation
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Top plate/acrylic
• Caster: F75mm Made of urethane (with stopper x 2 pieces)
• Shelf board interval: 50mm
• Door packing: Magnet type
• Weight: 18.5kg
• Accessories: Silica gel plate x 1 plate
• Outer dimensions: 574 x 517 x 1150 (1095) mm *in () including knob.
• Effective internal dimensions: 560 x 483 x 986mm
• *Shelf board is not included in the package. *Don't put anything on the top plate.
• Model number: SD-BG1K
• Large-sized caster is adopted in order to withstand frequent movement.
• Magnet packing is adopted for door packing and excellent in air tightness.
$0
Glove Box Plane Door
AS ONE Corporation
• Model number: Flat door
• Size (mm): 745 x 460 x 594
• Usage: Gas replacement
• Material: Body / PMMA (acrylic), frame / aluminum, shelf board / reinforced plastic
• Door frontage: 494 x 665 mm
• Weight: 13.5 kg
• Accessories: glove Big X for glove box, glove fixing spring x 2 pieces
• Gas substitutional desiccator equipped with glove holder, and can be used without opening door.
• Door is preparing 2 kinds, plane type and inclination type.
• Since there are 4 screw holes(with airtight stopper) in body, flow meter(sold separately) etc. can be attached.
$0
Glove Box Inclined Door
AS ONE Corporation
• Model number: sloping door
• Size (mm): 745 x 556 x 594
• Usage: Gas replacement
• Material: Body / PMMA (acrylic), frame / aluminum, shelf board / reinforced plastic
• Door frontage: 494 x 665 mm
• Weight: 14 kg
• Accessories: glove Big X for glove box, glove fixing spring x 2 pieces
• Gas substitutional desiccator equipped with glove holder, and can be used without opening door.
• Door is preparing 2 kinds, plane type and inclination type.
• Since there are 4 screw holes(with airtight stopper) in body, flow meter(sold separately) etc. can be attached.
$0
Option for Desiccator Drawer
AS ONE Corporation
• Size: 467 x 451 x 90mm
• Part number: Drawer (with slide rail)
$0
Wagon Desiccator
AS ONE Corporation
• Top board size: 1152 x 490mm
• Shelf board interval: 50mm
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Top plate/wooden plywood
• Caster: F100mm Made of urethane (with stopper x 2 pieces)
• Weight: 40kg
• Accessories: Silica gel plate x 2 plates
• Size: 1152 x 517 x 1127mm (*including knob. )
• *Shelf board is not included in the package.
• Model number: WGN-W
• It is working table combination Desiccator which is attached top plate.
• Article in custody is taken out and work can be begun immediately.
• Magnet packing is adopted as door packing so excellent in airtightness.
$0
Standard Desiccator 574 x 517 x 1115 (1170) mm
AS ONE Corporation
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Top plate/wooden plywood
• Caster: F75mm Made of urethane (with stopper x 2 pieces)
• Shelf board interval: 50mm
• Top plate withstand load: Approximately 20kg/sheet (uniform distribution load)
• Door packing: Magnet type
• Weight: 22.5kg
• Accessories: Silica gel plate x 1 plate
• Outer dimensions: 574 x 517 x 1115 (1170) mm *in () including knob.
• Effective internal dimensions: 560 x 483 x 986mm
• *Shelf board is not included in the package.
• Model number: WGN-S
• Large-sized caster is adopted in order to withstand frequent movement.
• Magnet packing is adopted for door packing and excellent in air tightness.
$0
Pasaurina Desiccator with Handle
AS ONE Corporation
• With handle
• Material: AS (acrylonitrile styrene) resin
• Shelf board dimensions: 306 x 332 x 10tmm
• Shelf spacing: 65mm (maximum 5 sheets storable)
• Shelf board load capacity: Approximately 2kg/board
• Total withstand load: Approx 5kg
• Weight: About 4.2kg (including shelf board)
• Accessories: Shelf board x 2, silica gel plate x 1
• Outer dimensions: 350 x 350 x 400mm
• Inner dimension: 340 x 344.5 x 387mm
• *You can use by being piled on the use of the optional Joint frame H type (2H type). *For rubber feet, install when used singly. The bottom side is more stable in flat when using the optional Joint frame H type (2H type).
• Model number: IWH
• Taking in and out of objects smoothly from one-touch opening-and-closing type door are possible.
• Lateral storage is possible by flat door.
$0
Pasaurina Desiccator without Handle
AS ONE Corporation
• Without handle
• Material: AS (acrylonitrile styrene) resin
• Shelf board dimensions: 306 x 332 x 10tmm
• Shelf spacing: 65mm (maximum 5 sheets storable)
• Shelf board load capacity: Approximately 2kg/board
• Total withstand load: Approx 5kg
• Weight: About 4.2kg (including shelf board)
• Accessories: Shelf board x 2, silica gel plate x 1
• Outer dimensions: 350 x 350 x 400mm
• Inner dimension: 340 x 344.5 x 387mm
• *You can use by being piled on the use of the optional Joint frame H type (2H type). *For rubber feet, install when used singly. The bottom side is more stable in flat when using the optional Joint frame H type (2H type).
• Model number: IW
• Taking in and out of objects smoothly from one-touch opening-and-closing type door are possible.
• Lateral storage is possible by flat door.
$0
Portable Desiccator 302 x 318 x 420mm
AS ONE Corporation
• Material: Body/strengthened glass, Frame/aluminum, Corner joint/ABS resin
• Shelf board load capacity: Approx 5kg
• Weight: Approx 6kg
• Accessories: Shelf board (SUS430) x 1, silica gel plate (polystyrene)
• Outer dimensions: 302 x 318 x 420mm
• Inner dimension: 272 x 260 x 370mm
• Shelf board dimensions: 268 x 256mm
• Model number: PHG
• Door is equipped with snap lock.
• Suitable for storing hot samples.
$0