Pump

• Model number: DA-30S
• Discharge air volume: 24/30 (L/min)
• Exhaust speed (L/min): 24/30
• Achieving pressure (kPa): 26.6
• Inlet diameter (OD) x (ID) mm: 9 x 5
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 135 x 203 x 182
• Weight (kg): 3.9
• Gas contact unit material: Pump head/aluminum die cast, Valve/fluorine rubber, Diaphragm/NBR (nitrile rubber)
• Country of origin: Japan

• Model number: DA-30D
• Discharge air volume: 30/36 (L/min)
• Exhaust speed (L/min): 30/36
• Achieving pressure (kPa): 6.7
• Inlet diameter (OD) x (ID) mm: 9 x 5
• Internal thermal protector
• Power supply: 1f200-220V 50/60Hz
• Size (mm): 212 x 278 x 224.5
• Weight (kg): 11
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/NBR (nitrile rubber)
• Country of origin: Japan

• Model number: ?DA-40S
• Discharge air volume: 40/46 (L/min)
• Exhaust speed (L/min): 40/46
• Achieving pressure (kPa): 19.9
• Inlet diameter (OD) x (ID) mm: 9 x 5
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 128 x 242 x 178
• Weight (kg): 7.2
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/heat-resistant NBR (nitrile rubber)
• *Unloader valve is an option (A mechanism that eliminates the differential pressure between pump head and outside by inhaling outside air into the pump head when a diaphragm type dry vacuum pump stops operating).
• Country of origin: Japan

• Model number: DA-60S
• Exhaust speed (L/min): 60/72(50/60Hz)
• Achieving pressure (kPa): 21.3
• Inlet diameter (OD) x (ID) mm: 9 x 5
• Internal thermal protector
• Power supply: 1f200-220V 50/60Hz
• Size (mm): 212 x 278 x 224.5
• Weight (kg): 11
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/NBR (nitrile rubber)
• Country of origin: Japan

• Model number: ?DA-60D
• Exhaust speed (L/min): 60/72(50/60Hz)
• Achieving pressure (kPa): 3.32
• Inlet diameter (OD) x (ID) mm: 14 x 9
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 156 x 358 x 238
• Weight (kg): 19
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/EPDM (ethylene propylene rubber)
• *Unloader valve is an option (A mechanism that eliminates the differential pressure between pump head and outside by inhaling outside air into the pump head when a diaphragm type dry vacuum pump stops operating).
• Country of origin: Japan

• Model number: ?DA-120S
• Exhaust speed (L/min): 120/144
• Achieving pressure (kPa): 13.3
• Inlet diameter (OD) x (ID) mm: 14 x 9
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 162 x 358 x 238
• Weight (kg): 19
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/EPDM (ethylene propylene rubber)
• *Unloader valve is an option (A mechanism that eliminates the differential pressure between pump head and outside by inhaling outside air into the pump head when a diaphragm type dry vacuum pump stops operating).
• Country of origin: Japan

• Model number: DA-121D
• Exhaust speed (L/min): 120/145
• Achieving pressure (kPa): 3.3
• Inlet diameter (OD) x (ID) mm:
• Internal thermal protector
• Power supply: 1f220-230V 50/60Hz
• Size (mm): 193.5 x 411 x 285
• Weight (kg): 26
• Gas contact unit material: Pump head/aluminum die cast, Valve/PTFE (poly tetrafluoroethylene), Diaphragm/EPDM (ethylene propylene rubber)
• Country of origin: Japan

• Model number: DA-241S
• Exhaust speed (L/min): 240/260
• Achieving pressure (kPa): 16
• Inlet diameter (OD) x (ID) mm: 16 x 12
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 207 x 411 x 285
• Weight (kg): 26
• Gas contact unit material: Pump head/aluminum die cast, Valve/PTFE (poly tetrafluoroethylene), Diaphragm/EPDM (ethylene propylene rubber)
• Country of origin: Japan

• Model number: DAT-50D
• Exhaust speed (L/min): 50/55
• Achieving pressure (kPa): 3.3
• Inlet diameter (OD) x (ID) mm: 12 x 8.5
• Internal thermal protector
• Power supply: 1f200-220V 50/60Hz
• Size (mm): 150 x 232 x 305
• Weight (kg): 11
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/NBR (nitrile rubber)
• Country of origin: Japan

• Model number: DAT-100S
• Exhaust speed (L/min): 100/110
• Achieving pressure (kPa): 13.3
• Inlet diameter (OD) x (ID) mm: 12 x 8.5
• Internal thermal protector
• Power supply: 1f200-220V 50/60Hz
• Size (mm): 150 x 232 x 305
• Weight (kg): 11
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/NBR (nitrile rubber)
• Country of origin: Japan

• Model number: DAP-30
• Discharge air volume: 30/36 (L/min)
• Exhaust speed (L/min): 30/36
• Achieving pressure (kPa): 33.3
• Pressurization: 0.15MPa (gauge pressure)
• Intake and exhaust port: (OD) f9 x (ID) f5mm
• Power supply: 1f220V
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/CR
• Size: 142 x 215 x 180mm
• Weight: 3.6kg
• Internal thermal protector
• Diaphragm type for both pressurizing and de-pressurizing
• Country of origin: Japan

• Model number: G-10DA
• Type: 2 stage type
• Exhaust speed (effective) (L/min): 10/12 (50/60Hz)
• Achieving pressure (Pa): 1.3 (1 x 10^-2Torr)
• Power (V): 1f220V
• Inlet diameter (OD) x (ID) mm: 18 x 14 (M20 x P1)
• Oil used: SMR-100 (included)
• Oil volume: 250mL
• Size: 130 x 228 x 165
• Weight: 5.5kg
• Small direct connection type
• *When using an inlet pipe smaller than the inlet pipe inner diameter of the pump, The effective exhaust speed may decrease slightly.
• Country of origin: Japan

• Model number: G-25SA
• Type: 1 stage type
• Exhaust speed (effective) (L/min): 20/24 (50/60Hz)
• Achieving pressure (Pa): 9.3 (7 x 10^-2Torr)
• Power (V): 1f220-230V
• Inlet diameter (OD) x (ID) mm: 18 x 14 (M20 x P1)
• Oil used: SMR-100 (included)
• Oil volume: 230mL
• Size: 156 x 284 x 199.5mm
• Weight: 8.5kg
• Small direct connection type
• *When using an inlet pipe smaller than the inlet pipe inner diameter of the pump, The effective exhaust speed may decrease slightly.
• Country of origin: Japan

• Model number: G-20DA
• Type: 2 stage type
• Exhaust speed (effective) (L/min): 20/24 (50/60Hz)
• Achieving pressure (Pa): 1.3 x 10^-1 (1 x 10^-3^Torr)
• Power (V): 1f220-230V
• Inlet diameter (OD) x (ID) mm: 18 x 14 (M20 x P1)
• Oil used: SMR-100 (included)
• Oil volume: 180mL
• Size: 56 x 295.5 x 199.5mm
• Weight: 9kg
• Small direct connection type
• *When using an inlet pipe smaller than the inlet pipe inner diameter of the pump, The effective exhaust speed may decrease slightly.
• Country of origin: Japan

• Model number: ?G-50SA
• Type: 1 stage type
• Exhaust speed (effective) (L/min): 50/60 (50/60Hz)
• Achieving pressure (Pa): 9.3 (7 x 10^-2Torr)
• Power (V): 1f220-230V
• Inlet diameter (OD) x (ID) mm: 18 x 14 (M20 x P1)
• Oil used: SMR-100 (included)
• Oil volume: 360mL
• Size: 156 x 344.5 x 199.5mm
• Weight: 11kg
• Small direct connection type
• *When using an inlet pipe smaller than the inlet pipe inner diameter of the pump, The effective exhaust speed may decrease slightly. Backflow prevention mechanism is installed.
• Country of origin: Japan

• Model number: G-50DA
• Type: 2 stage type
• Exhaust speed (effective) (L/min): 50/60 (50/60Hz)
• Achieving pressure (Pa): 1.3 x 10^-1 (1 x 10^-3Torr)
• Power (V): 1f220-230V
• Inlet diameter (OD) x (ID) mm: 18 x 14 (M20 x P1)
• Oil used: SMR-100 (included)
• Oil volume: 260mL
• Size: 156 x 344.5 x 199.5mm
• Weight: 11kg
• Small direct connection type
• *When using an inlet pipe smaller than the inlet pipe inner diameter of the pump, The effective exhaust speed may decrease slightly.
• Country of origin: Japan

• Model number: G-5DA
• Type: 2 stage type
• Exhaust speed (effective) (L/min): 5/6 (50/60Hz)
• Achieving pressure (Pa): 6.7
• Power (V): 1f220V
• Inlet diameter (OD) x (ID) mm: 12 x 6 (M20 x P1)
• Oil used: SMR-100 (included)
• Oil volume: 180mL
• Size: 130 x 203 x 159.5mm
• Weight: 5kg
• Small direct connection type
• *When using an inlet pipe smaller than the inlet pipe inner diameter of the pump, The effective exhaust speed may decrease slightly.
• Country of origin: Japan

• Model number: DAP-6D
• Discharge air volume: 6/7 (L/min) (50/60Hz)
• Achieving pressure: 6.65 (kPa)
• Exhaust speed (effective) (L/min): 6/7(50/60Hz)
• Power supply: 1f220-230V 50/60Hz
• Power consumption: 10W
• Full load current: 0.39/0.43A (50/60Hz)
• Intake, exhaust port diameter: Rc1/8
• Size: 93 x 163 x 100.6mm
• Weight: 1.9kg
• *Inlet and exhaust pipes are not included in the package.
• Country of origin: Japan

• Model number: DAP-12S
• Discharge air volume: 12/14 (L/min) (50/60Hz)
• Achieving pressure: 24.0kPa
• Exhaust speed (effective) (L/min): 12/14(50/60Hz)
• Power supply: 1f220-230V 50/60Hz
• Power consumption: 10W
• Full load current: 0.39/0.43A (50/60Hz)
• Intake, exhaust port diameter: Rc1/8
• Size: 93 x 163 x 100.6mm
• Weight: 1.9kg
• *Inlet and exhaust pipes are not included in the package.
• Country of origin: Japan

• Model number: DTU-20
• Exhaust speed (L/min): 20/23(50/60Hz)
• Achieving pressure (Pa): 200
• Power supply: 1f220V 50/60Hz
• Power consumption: 80W
• Intake, exhaust port diameter: O.Df10 x I.Df6mm (Rc1/8)
• Size (mm): 161 x 327 x 217
• Weight (kg): 7.5
• Country of origin: Japan