Pump

• Model number: MH -552 S
• Maximum flow rate (L/min): 48
• Flow rate/lifting height (L/min)/(m): 30/3
• Maximum lifting height (m): 10
• Main material: PP
• Hose material/Length (m): PVC/1.3
• short type
• Working viscosity: up to 100 mPa*s (100cP)
• *Flow rate value is with freshwater and at room temperature.
• *It can also be used for special order with lower neck length. Please contact us.

• Model number: MHM -21L
• Maximum flow rate (L/min): 25
• Flow rate/lifting height (L/min)/(m): 15/2
• Maximum lifting height (m): 4.2
• Main material: PP
• Hose material/Length (m): PVC/1
• long type
• Working viscosity: up to 100 mPa*s (100cP)
• *Flow rate value is with freshwater and at room temperature.
• *It can also be used for special order with lower neck length. Please contact us.

• Model number: MHM -316 MF
• Maximum flow rate (L/min): 30
• Flow rate/lifting height (L/min)/(m): 21/2
• Maximum lifting height (m): 5
• Main material: Stainless steel SUS316
• Hose material/Length (m): SUS304/1
• Mini type, SUS flexible hose specification
• Working viscosity: up to 100 mPa*s (100cP)
• *Flow rate value is with freshwater and at room temperature.
• *It can also be used for special order with lower neck length. Please contact us.

• Model number: MHM -316 MA
• Maximum flow rate (L/min): 30
• Flow rate/lifting height (L/min)/(m): 22/2
• Maximum lifting height (m): 5
• Main material: Stainless steel SUS316
• Hose material/Length (m): PVC/2
• Air motors and mini-types
• Working viscosity: up to 100 mPa*s (100cP)
• *When selecting the air motor (A), it is recommended to use the air 3-point set (Filter lubricator (oil mug) regulator).
• *Flow rate value is with freshwater and at room temperature.
• *It can also be used for special order with lower neck length. Please contact us.

• Model number: MHM -316 MFA
• Maximum flow rate (L/min): 30
• Flow rate/lifting height (L/min)/(m): 22/2
• Maximum lifting height (m): 5
• Main material: Stainless steel SUS316
• Hose material/Length (m): SUS304/1
• Air motor, mini type, SUS flexible hose specification
• Working viscosity: up to 100 mPa*s (100cP)
• *When selecting the air motor (A), it is recommended to use the air 3-point set (Filter lubricator (oil mug) regulator).
• *Flow rate value is with freshwater and at room temperature.
• *It can also be used for special order with lower neck length. Please contact us.

• Material: Desiccator/transparent toughened PMMA (acrylic), plate thickness of 20mm, Lower pump room/steel baking coating
• Connection port for gas replacement: f6mm Nylon fitting
• Vacuum gauge equipment
• Weight: 21kg
• With PMMA (acrylic) shelf board x 2
• Vacuum ultimate pressure: 5.3kPa (40Torr)
• Exhaust speed (50/60Hz): 20/24L/min
• Power supply: AC100V 50/60Hz
• Power cord length: 3m (3P plug)
• Model number: VL-ALN
• Outer dimension (mm): 300 x 222 x 570
• Inner dimension (mm): 260 x 180 x 260
• Diaphragm type of dry vacuum pump and gas valve for replacement are built-in, and piping work is not required.

• Material: Desiccator/transparent toughened PMMA (acrylic), plate thickness of 20mm, Lower pump room/steel baking coating
• Connection port for gas replacement: f6mm Nylon fitting
• Vacuum gauge equipment
• Weight: 23kg
• With PMMA (acrylic) shelf board x 2
• Vacuum ultimate pressure: 5.3kPa (40Torr)
• Exhaust speed (50/60Hz): 20/24L/min
• Power supply: AC100V 50/60Hz
• Power cord length: 3m (3P plug)
• Model number: VK-ALN
• Outer dimension (mm): 300 x 322 x 570
• Inner dimension (mm): 260 x 280 x 260
• Diaphragm type of dry vacuum pump and gas valve for replacement are built-in, and piping work is not required.

• Model number: EAP-01
• Body (with AC adapter)
• Maximum discharge flow rate: 1.5L/min
• Maximum pressure: 26.6kPa (200mmHg)
• Maximum vacuum attainment level: -26.6kPa
• Connection port size: f5.5mm nipple
• Gas contact unit material: Chloroprene, PB Resin
• Power supply: DC12V AC100V 53W (AC adapter included)
• Power cord length: Approx 1.5m
• Weight: 235g
• For both discharge and suction
• Size: 57 x 166 x 36mm
• It is mini air pump which can be used also in laboratory or the field.
• If an optional battery pack is used, also outdoors, it can be used.
• It can be used also as small compressor.
• It is possible to change the amount of air intakes in volume.

• Temperature settings range: Room temperature +5 - 80?
• Chamber capacity: 27L
• Temperature distribution accuracy: +/- 0.3? or less (value in the setting water temperature 40? and room temperature 20?)
• Pump capacity (50/60Hz): 11/12L/min
• Temperature control system: Heater PID control (SSR output)
• Safety mechanism Self-diagnosis function, Electrical leakage breaker, Abnormal heating prevention device, Float type no-water burning prevention, External output, Timer function, Program function
• Power supply: 100VAC, 50/60Hz
• Maximum operation current: 14A
• Power cord: 3P plug + adapter
• Material: Body/Steel, Water tank/SUS304 + Glass
• Weight: 22Kg
• Accessories: Shelf board x 1, Shelf board rest x 4 pieces, Stand x 1 piece, Clamp x 1 piece, Clamp holder x 1 piece
• External dimensions: 505 x 360 x 370mm
• Internal dimensions: 300 x 300 x 300mm
• Effective internal dimensions: 225mm
• *Effective inside dimensions indicate the maximum depth when using shelf board. *Cooling function is not available in this machine single. By combined use of optional cooling coil and cooling water circulation apparatus, etc., it can be controlled at room temperature or less.
• Model number: TRW-27TP
• Observation door is attached forward and backward, convenient for observation of sample, and measurement.
• Thickness of frame upper part becomes 25*mm*, and visibility is improved.
• In addition to microcomputer type PID control, stirring in tub with sufficient efficiency with magnet pump realizes high temperature distribution accuracy.
• Program operation function can also perform No.-of-times setup of repeat which input of max. 8-steps is possible, and also repeats input step, and is made to operate.

• Temperature settings range: Room temperature +5 - 80?
• Chamber capacity: 42L
• Temperature distribution accuracy: +/- 0.3? or less (value in the setting water temperature 40? and room temperature 20?)
• Pump capacity (50/60Hz): 27/31L/min
• Temperature control system: Heater PID control (SSR output)
• Safety mechanism Self-diagnosis function, Electrical leakage breaker, Abnormal heating prevention device, Float type no-water burning prevention, External output, Timer function, Program function
• Power supply: 100VAC, 50/60Hz
• Maximum operation current: 23A
• Power cord: Round terminal, Without plug
• Material: Body/Steel, Water tank/SUS304 + Glass
• Weight: 28Kg
• Accessories: Shelf board x 1, Shelf board rest x 4 pieces, Stand x 1 piece, Clamp x 1 piece, Clamp holder x 1 piece
• External dimensions: 605 x 420 x 370mm
• Internal dimensions: 390 x 360 x 300mm
• Effective internal dimensions: 225mm
• *Effective inside dimensions indicate the maximum depth when using shelf board. *Cooling function is not available in this machine single. By combined use of optional cooling coil and cooling water circulation apparatus, etc., it can be controlled at room temperature or less.
• Model number: TRW-42TP
• Observation door is attached forward and backward, convenient for observation of sample, and measurement.
• Thickness of frame upper part becomes 25*mm*, and visibility is improved.
• In addition to microcomputer type PID control, stirring in tub with sufficient efficiency with magnet pump realizes high temperature distribution accuracy.
• Program operation function can also perform No.-of-times setup of repeat which input of max. 8-steps is possible, and also repeats input step, and is made to operate.

• Temperature settings range: Room temperature +5 - 80?
• Chamber capacity: 70L
• Temperature distribution accuracy: +/- 0.3? or less (value in the setting water temperature 40? and room temperature 20?)
• Pump capacity (50/60Hz): 32/38L/min
• Temperature control system: Heater PID control (SSR output)
• Safety mechanism Self-diagnosis function, Electrical leakage breaker, Abnormal heating prevention device, Float type no-water burning prevention, External output, Timer function, Program function
• Power supply: 100VAC, 50/60Hz
• Maximum operation current: 26A
• Power cord: Round terminal, Without plug
• Material: Body/Steel, Water tank/SUS304 + Glass
• Weight: 34Kg
• Accessories: Shelf board x 1, Shelf board rest x 4 pieces, Stand x 1 piece, Clamp x 1 piece, Clamp holder x 1 piece
• External dimensions: 705 x 460 x 420mm
• Internal dimensions: 500 x 400 x 350mm
• Effective internal dimensions: 275mm
• *Effective inside dimensions indicate the maximum depth when using shelf board. *Cooling function is not available in this machine single. By combined use of optional cooling coil and cooling water circulation apparatus, etc., it can be controlled at room temperature or less.
• Model number: TRW-70TP
• Observation door is attached forward and backward, convenient for observation of sample, and measurement.
• Thickness of frame upper part becomes 25*mm*, and visibility is improved.
• In addition to microcomputer type PID control, stirring in tub with sufficient efficiency with magnet pump realizes high temperature distribution accuracy.
• Program operation function can also perform No.-of-times setup of repeat which input of max. 8-steps is possible, and also repeats input step, and is made to operate.

• Model number: Foot switch
• Weigh sample and it will be automatically diluted according to set dilution factor.
• High-precision dilution control due to automatic pump control using real-time communication with electronic balance.
• Using foot switch(sold separately)frees both hands, making it convenient if you have large amount of samples.

• Material: Body/Transparent PMMA (acrylic resin), Packing/NBR (round), Silicone rubber (Rectangle type)
• Allowable vacuum degree: About 133Pa
• Valve: Hose nipple outer diameter/f8mm
• Tube connector: Fits for outer diameter f6mm tube, one touch type
• Inner dimension (mm): 60 x 25 x 90
• Recommended vacuum pump: (1-4148-11) Dry vacuum pump DTC-22, (1-671-06) Dry vacuum pump DA-20D
• Model number: Rectangle 90 type
• Compact and lightweight so that it is easy to carry.
• Capable of vacuum gas replacement.
• Square type can be used while being stacked up.

• Material: Body/Transparent PMMA (acrylic resin), Packing/NBR (round), Silicone rubber (Rectangle type)
• Allowable vacuum degree: About 133Pa
• Valve: Hose nipple outer diameter/f8mm
• Tube connector: Fits for outer diameter f6mm tube, one touch type
• Inner dimension (mm): 95 x 40 x 140
• Recommended vacuum pump: (1-4148-11) Dry vacuum pump DTC-22, (1-671-06) Dry vacuum pump DA-20D
• Model number: Rectangle 140 type
• Compact and lightweight so that it is easy to carry.
• Capable of vacuum gas replacement.
• Square type can be used while being stacked up.

• Model number: Rectangle 200 type
• Inner dimension (mm): 135 x 60 x 200
• Material: Body/Transparent PMMA (acrylic resin), Packing/NBR (round), Silicone rubber (Rectangle type)
• Allowable vacuum degree: About 133Pa
• Valve: Hose nipple outer diameter/f8mm
• Tube connector: Fits for outer diameter f6mm tube, one touch type
• Recommended vacuum pump: 1-4148-11 Dry vacuum pump DTC-22, 1-671-06 Dry vacuum pump DA-20D
• Compact and lightweight so that it is easy to carry.
• Capable of vacuum gas replacement.
• Square type can be used while being stacked up.

• Material: Body/Transparent PMMA (acrylic resin), Packing/NBR (round), Silicone rubber (Rectangle type)
• Allowable vacuum degree: About 133Pa
• Valve: Hose nipple outer diameter/f8mm
• Tube connector: Fits for outer diameter f6mm tube, one touch type
• Inner dimension (mm): f60 x 30
• Recommended vacuum pump: (1-4148-11) Dry vacuum pump DTC-22, (1-671-06) Dry vacuum pump DA-20D
• Model number: Type 30
• Compact and lightweight so that it is easy to carry.
• Capable of vacuum gas replacement.
• Square type can be used while being stacked up.

• Material: Body/Transparent PMMA (acrylic resin), Packing/NBR (round), Silicone rubber (Rectangle type)
• Allowable vacuum degree: About 133Pa
• Valve: Hose nipple outer diameter/f8mm
• Tube connector: Fits for outer diameter f6mm tube, one touch type
• Inner dimension (mm): f60 x 60
• Recommended vacuum pump: (1-4148-11) Dry vacuum pump DTC-22, (1-671-06) Dry vacuum pump DA-20D
• Model number: Type 60
• Compact and lightweight so that it is easy to carry.
• Capable of vacuum gas replacement.
• Square type can be used while being stacked up.

• Material: Body/Transparent PMMA (acrylic resin), Packing/NBR (round), Silicone rubber (Rectangle type)
• Allowable vacuum degree: About 133Pa
• Valve: Hose nipple outer diameter/f8mm
• Tube connector: Fits for outer diameter f6mm tube, one touch type
• Inner dimension (mm): f60 x 100
• Recommended vacuum pump: (1-4148-11) Dry vacuum pump DTC-22, (1-671-06) Dry vacuum pump DA-20D
• Model number: Type 100
• Compact and lightweight so that it is easy to carry.
• Capable of vacuum gas replacement.
• Square type can be used while being stacked up.

• Material: Body/Transparent PMMA (acrylic resin), Packing/NBR (round), Silicone rubber (Rectangle type)
• Allowable vacuum degree: About 133Pa
• Valve: Hose nipple outer diameter/f8mm
• Tube connector: Fits for outer diameter f6mm tube, one touch type
• Inner dimension (mm): f60 x 200
• Recommended vacuum pump: (1-4148-11) Dry vacuum pump DTC-22, (1-671-06) Dry vacuum pump DA-20D
• Model number: Type 200
• Compact and lightweight so that it is easy to carry.
• Capable of vacuum gas replacement.
• Square type can be used while being stacked up.

• Material: Body/Transparent PMMA (acrylic resin), Packing/NBR (round), Silicone rubber (Rectangle type)
• Allowable vacuum degree: About 133Pa
• Valve: Hose nipple outer diameter/f8mm
• Tube connector: Fits for outer diameter f6mm tube, one touch type
• Inner dimension (mm): f60 x 300
• Recommended vacuum pump: (1-4148-11) Dry vacuum pump DTC-22, (1-671-06) Dry vacuum pump DA-20D
• Model number: Type 300
• Compact and lightweight so that it is easy to carry.
• Capable of vacuum gas replacement.
• Square type can be used while being stacked up.