Pump

• Material: Body/PMMA (acrylic resin) (Plate thickness: 25mm) , Valve, vacuum gauge mounting seat/PC (polycarbonate)
• Effective internal dimensions: 260 x 260 x 147mm
• Allowable vacuum degree: About 133Pa
• Weight: 11.6kg
• Outer dimension (mm) *: 360 x 406 x 245
• Stacking supported
• *Including valve, meter.
• Accessories: Vacuum gauge x 1
• Silica gel plate x 1 plate
• Vacuum valve: Small/outer diameter f8mm, large/outer diameter f14mm (1 piece each)
• Recommended vacuum pump: (1-4148-11) Dry vacuum pump DTC-22, (1-671-06) Dry vacuum pump DA-20D, (1-672-07) Oil-sealed rotary vacuum pump G-50SA
• Model number: VO type
• Doors are positioned on the both sides of the desiccators, and it is possible to use them as stacked on one another.
• Possible to stored under the reagent shelf of the laboratory table in order to save space on the table.
• Highly-sealable silicon packing is used.

• Flow rate (mL/min)*: 5 - 1000
• Rotation speed (rpm): 2 - 150
• Motor: Stepping motor
• Pump: 2 roller pump
• Compatible tube material: Silicone, Tygon (R), PharMed R
• Applicable tube inner diameter x outer diameter: f6 x f9mm, f7 x f10mm
• Forward/reverse switch function: Available (LED display)
• Flow rate (mL/min): 5 - 1000
• Rotation speed (rpm): 1 - 250
• Body material: Steel coating
• Size: 120 x 180 x 200mm
• Weight: 2.4kg
• Power supply: AC 100 - 240V, 50/60Hz
• Plug shape: 2P plug (AC adapter)
• *When using water and Silicone tube. *Flow rate range is limited depending on tube diameter.
• Model number: TP-20SA
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• It is excellent in accuracy and durability because a high precision stepping motor is adopted.
• It operates stably even when subject to load changes because it is excellent in the reproducibility and stability of rotation per minute.
• Self-suck type requiring no priming water.

• Allowable vacuum degree: 1Torr (approx 133Pa)
• Material: Body portion, bottom plate, top panel/transparent toughened PMMA (acrylic), Valve, vacuum gauge mounting portion/PC (polycarbonate)
• Plate thickness: Trunk/10mm, Bottom plate/25mm, Top panel/25mm
• Weight: 8.0kg
• Model number: Type 300
• Outer dimension (mm): f315 x 449
• Inner dimension (mm): f280 x 296
• Accessories: Vacuum valve: Small/outer diameter f8mm x 1 piece, Large/outer diameter f14mm x 1 piece, Vacuum gauge x 1
• Recommended vacuum pump: Dry vacuum pump DTC-22, Dry vacuum pump DA-20D
• Top plate is removable.

• Model number: AVRD oil mist trap
• This is 2-stage oil-sealed high vacuum rotary pump designed with special focus on durability and reliability.
• Gas ballast valve is fitted, which can prevent oil contamination due to condensing gases and moisture.
• Reverse flow prevention mechanism is integrated which prevents any reverse oil flow when power is turned off.
• Optional oil mist trap can be connected.
• Optional tube joints are available with wide range of sizes, which can be selected according to vacuum-line used.

• Model number: KF25 hoop 225
• This is 2-stage oil-sealed high vacuum rotary pump designed with special focus on durability and reliability.
• Gas ballast valve is fitted, which can prevent oil contamination due to condensing gases and moisture.
• Reverse flow prevention mechanism is integrated which prevents any reverse oil flow when power is turned off.
• Optional oil mist trap can be connected.
• Optional tube joints are available with wide range of sizes, which can be selected according to vacuum-line used.

• Model number: KF25 center rest 325
• This is 2-stage oil-sealed high vacuum rotary pump designed with special focus on durability and reliability.
• Gas ballast valve is fitted, which can prevent oil contamination due to condensing gases and moisture.
• Reverse flow prevention mechanism is integrated which prevents any reverse oil flow when power is turned off.
• Optional oil mist trap can be connected.
• Optional tube joints are available with wide range of sizes, which can be selected according to vacuum-line used.

• Ultimate pressure (with gas ballast valve closed): 3.5Pa (2.6 x 10 -2Torr)
• Ultimate pressure (with gas ballast valve opened): 10Pa (7.5 x 10 -2Torr)
• Inlet port: f15mm
• Exhaust opening: KF16
• Oil volume: 0.2L
• Ambient temperature range: 5 - 40?
• Noise: 62dB or less
• Size: 318 x 124 x 234mm
• Power supply: 100VAC 50/60Hz
• Power cord length: 1.5m (3P plug)
• Weight: 9kg
• Exhaust speed (L/min): 30/36 (50/60Hz)
• Type: 2 stage type
• 2 stage type, standard
• Model number: AVRI-30
• Compact double stage vacuum pump with excellent durability that can be used for wide range of applications.
• Gas ballast valve is fitted, which can prevent oil contamination due to condensing gases and moisture.
• Reverse flow prevention solenoid valve is integrated which prevents any reverse oil flow when power is turned off.
• Optional oil mist trap can be connected.
• Optional tube joints are available with sizes of wide range, which can be selected according to vacuum-line used.

• Ultimate pressure (with gas ballast valve closed): 3.5Pa (2.6 x 10 -2Torr)
• Ultimate pressure (with gas ballast valve opened): 10Pa (7.5 x 10 -2Torr)
• Inlet port: f15mm
• Exhaust opening: KF16
• Oil volume: 0.3L
• Ambient temperature range: 5 - 40?
• Noise: 62dB or less
• Size: 337 x 138 x 244mm
• Power supply: 100VAC 50/60Hz
• Power cord length: 1.5m (3P plug)
• Weight: 11kg
• Exhaust speed (L/min): 60/72 (50/60Hz)
• Type: 2 stage type
• 2 stage type, standard
• Model number: AVRI-60
• Compact double stage vacuum pump with excellent durability that can be used for wide range of applications.
• Gas ballast valve is fitted, which can prevent oil contamination due to condensing gases and moisture.
• Reverse flow prevention solenoid valve is integrated which prevents any reverse oil flow when power is turned off.
• Optional oil mist trap can be connected.
• Optional tube joints are available with sizes of wide range, which can be selected according to vacuum-line used.

• Model number: AVRI oil mist trap
• Compact double stage vacuum pump with excellent durability that can be used for wide range of applications.
• Gas ballast valve is fitted, which can prevent oil contamination due to condensing gases and moisture.
• Reverse flow prevention solenoid valve is integrated which prevents any reverse oil flow when power is turned off.
• Optional oil mist trap can be connected.
• Optional tube joints are available with sizes of wide range, which can be selected according to vacuum-line used.

• Model number: KF16 hoop 216
• Compact double stage vacuum pump with excellent durability that can be used for wide range of applications.
• Gas ballast valve is fitted, which can prevent oil contamination due to condensing gases and moisture.
• Reverse flow prevention solenoid valve is integrated which prevents any reverse oil flow when power is turned off.
• Optional oil mist trap can be connected.
• Optional tube joints are available with sizes of wide range, which can be selected according to vacuum-line used.

• Model number: KF16centerrest316
• Compact double stage vacuum pump with excellent durability that can be used for wide range of applications.
• Gas ballast valve is fitted, which can prevent oil contamination due to condensing gases and moisture.
• Reverse flow prevention solenoid valve is integrated which prevents any reverse oil flow when power is turned off.
• Optional oil mist trap can be connected.
• Optional tube joints are available with sizes of wide range, which can be selected according to vacuum-line used.

• Achieving pressure: 5Pa
• Power supply: 100VAC 50/60Hz
• Power consumption: 190W
• Power cord length: 2m
• Inlet port size: f6 mm
• Safety device: Over current protection equipment
• Oil capacity: 320mL
• Weight: 5.3kg
• Accessories: Hexagonal wrench (for oil discharging valve)
• Exhaust speed (L/min): 42 (50Hz)/50 (60Hz)
• Size (mm): 270 x 119 x 216
• Model number: AOP42C
• This is low cost single stage oil-sealed rotary pump.
• It is compact, easy to use and easy to carry with handle provided.
• Inlet is hose nipple of f6*mm* and outlet is simple trap system (both are not changeable). This configuration allows user to connect tubes easily.

• Achieving pressure: 5Pa
• Power supply: 100VAC 50/60Hz
• Power consumption: 190W
• Power cord length: 2m
• Inlet port size: f6 mm
• Safety device: Over current protection equipment
• Oil capacity: 320mL
• Weight: 5.5kg
• Accessories: Hexagonal wrench (for oil discharging valve)
• Exhaust speed (L/min): 70 (50Hz)/84 (60Hz)
• Size (mm): 270 x 119 x 216
• Model number: AOP70C
• This is low cost single stage oil-sealed rotary pump.
• It is compact, easy to use and easy to carry with handle provided.
• Inlet is hose nipple of f6*mm* and outlet is simple trap system (both are not changeable). This configuration allows user to connect tubes easily.

• Achieving pressure: 5Pa
• Power supply: 100VAC 50/60Hz
• Power consumption: 250W
• Power cord length: 2m
• Inlet port size: f6 mm
• Safety device: Over current protection equipment
• Oil capacity: 350mL
• Weight: 6.5kg
• Accessories: Hexagonal wrench (for oil discharging valve)
• Exhaust speed (L/min): 100 (50Hz)/114 (60Hz)
• Size (mm): 278 x 119 x 216
• Model number: AOP100C
• This is low cost single stage oil-sealed rotary pump.
• It is compact, easy to use and easy to carry with handle provided.
• Inlet is hose nipple of f6*mm* and outlet is simple trap system (both are not changeable). This configuration allows user to connect tubes easily.

• Exhaust speed: 50Hz/20L/min, 60Hz/24L/min
• Connection port: f6mm hose nipple
• Power supply: 100VAC 50/60Hz
• Power consumption: 200W
• Power cord length: 1.5m
• Safety device: Motor overheat protection equipment
• Diaphragm material: NBR (nitrile rubber), Valve/PP (polypropylene) pump head/aluminum alloy
• Size: 270 x 130 x 210mm
• Weight: 7.5kg
• Noise: 50dB
• 1 stages
• Achieving pressure: 0.08MPa
• Model number: GM-20S
• This is an oil-free and clean diaphragm type dry pump, which eliminates any risk of oil contamination.
• It is suitable to vacuum applications such as a rotary evaporator and chromatogram.
• A single stage type and double stage type are available, which can be selected according to the necessary vacuum level (ultimate vacuum).
• With a leak valve, it allows vacuum level adjustment.
• A pressure gauge is provided which can be used to check the vacuum level conveniently.

• Exhaust speed: 50Hz/20L/min, 60Hz/24L/min
• Connection port: f6mm hose nipple
• Power supply: 100VAC 50/60Hz
• Power consumption: 200W
• Power cord length: 1.5m
• Safety device: Motor overheat protection equipment
• Diaphragm material: NBR (nitrile rubber), Valve/PP (polypropylene) pump head/aluminum alloy
• Size: 350 x 130 x 220mm
• Weight: 10kg
• Noise: 50dB
• 2 stages
• Achieving pressure: 0.095MPa
• Model number: GM-20D
• This is an oil-free and clean diaphragm type dry pump, which eliminates any risk of oil contamination.
• It is suitable to vacuum applications such as a rotary evaporator and chromatogram.
• A single stage type and double stage type are available, which can be selected according to the necessary vacuum level (ultimate vacuum).
• With a leak valve, it allows vacuum level adjustment.
• A pressure gauge is provided which can be used to check the vacuum level conveniently.

• Achieving pressure: -0.08MPa
• Highest pressure: 0.2MPa
• Connection port: f6mm hose nipple
• Power supply: 100VAC 50/60Hz
• Power consumption: 200W
• Power cord length: 1.5m
• Safety device: Motor overheat protection equipment
• Connection Material: Diaphragm valve/NBR (Nitrile rubber), Valve/brass, Pump head/aluminum alloy
• Nozzle diameter: f6 mm
• Noise: 50dB
• Size: 230 x 180 x 265mm
• Weight: 8kg
• Exhaust speed (L/min): 30 (50Hz)/36 (60Hz)
• Model number: MP-30
• This is a multipurpose vacuum pump that can be used for both suction applications and compression applications.
• Because an oil-free diaphragm is used, there is no risk of oil contamination.
• Vacuum gauge? pressure gauge is provided which can be used to check the operation state.
• Equipped with a leak valve for suction and exhaus, it allows adjustment of vacuum level and pressure.

• Achieving pressure: -0.08MPa
• Highest pressure: 0.2MPa
• Connection port: f6mm hose nipple
• Power supply: 100VAC 50/60Hz
• Power consumption: 200W
• Power cord length: 1.5m
• Safety device: Motor overheat protection equipment
• Connection Material: Diaphragm valve/NBR (Nitrile rubber), Valve/Polypropylene, Pump head/aluminum alloy
• Nozzle diameter: f6 mm
• Noise: 50dB
• Size: 310 x 200 x 240mm
• Weight: 10kg
• Exhaust speed (L/min): 60 (50 Hz)/72 (60 Hz)
• Model number: MP-60
• This is a multipurpose vacuum pump that can be used for both suction applications and compression applications.
• Because an oil-free diaphragm is used, there is no risk of oil contamination.
• Vacuum gauge? pressure gauge is provided which can be used to check the operation state.
• Equipped with a leak valve for suction and exhaus, it allows adjustment of vacuum level and pressure.

• Power supply: 100VAC 50/60Hz
• Power cord length: Approx 1.9m (power cord with middle switch/2P plug)
• Power consumption: 10W
• Weight: Approx 4kg (dry vacuum pump)
• Exhaust speed: 6/7 (50/60Hz) L/min
• Achieving vacuum degree: 6.65kPa (standalone pump performance)
• Connection port: f8 hose nipple
• Size (mm): 230 x 180 x 130
• Model number: VPU-6DV
• All-in-one design with gauges and fittings provided as standard. The user can connect it to a vacuum desiccator easily.
• The vacuum pump is oil-free. The exhaust air is also clean.
• The unit is compact and easy to carry.

• Model number: VG400
• Size (mm): 420 x 440 x 450
• Usage: Vacuum
• Material: Body/Transparent strengthened PMMA (acrylic), Valve, vacuum gauge mounting portion/PC (polycarbonate)
• Pressure resistance: About 1330Pa (10Torr)
• Accessories: Large Gloves for Glove box x 1 pair, Valve x 2 pieces (size/f8mm, f14mm), Closed Lid x 2 pieces, Pressure gauge x 2 pieces, Positive pressure correspondence internal pressure absorption bag x 1 Set
• Recommended vacuum pump: Oil rotary vacuum pump GLD-136C, Oil rotary vacuum pump GCD-136X
• Substance unstable in air, strong toxic substance, etc. can be operated in environment replaced by inactive gas etc.
• Forcible exhaust gas of inner box is possible for gas substitution of inactive gas and dry air.
• Work equipment is taken in and out through left side door, and right pass box is used for loading and unloading while working(VG400 is only front door. pass box is not included)..