Safety Equipment
Big Hot Plate
AS ONE Corporation
• Highest temperature (?): 300
• Plate size (mm): 600 x 400
• Body material: Stainless steel (SUS304, SUS430 for bottom plate only)
• Plate material: Aluminum + ceramic coating
• Size/( ) includes protrusion: 640 x 440 (453.5) x 160.5mm
• Heater capacity: Mica heater 1400W x 2
• Temperature controller: PID control
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)
• Safety device: Overcurrent protection, excessive temperature rise prevention
• Power supply: Single phase 200V 50/60Hz
• Power cord: 2.5m
• Weight: 31.5kg
• Withstand load: 20kg
• Chemical top board
• Model number: HPRB-6040
• To prevent overheat, manual reset bimetal switch is adopted.
• With twice larger plate size than standard one, it supports large work.
$0
High Temperature Hot Plate
AS ONE Corporation
• Highest temperature (?): 500
• Plate size (mm): 400 x 300
• Body material: Stainless steel (SUS304, SUS430 for bottom plate only)
• Plate material: Stainless steel (SUS410) + ceramic coating
• Size/( ) includes protrusion: 555 x 340 (353.5) x 118mm
• Heater capacity: Sheathed heater 3800W
• Temperature controller: PID control
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)
• Safety device: Overcurrent protection, excessive temperature rise prevention
• Power supply: Single phase 200V 50/60Hz
• Power cord: 2.5m
• Weight: 26kg
• Withstand load: 10kg
• Chemical top board
• Model number: HPRH-4030
• To prevent overheat, manual reset bimetal switch is adopted.
• Sheath heater is adopted which enables heating to high temperatures.
$0
Lab Alert
AS ONE Corporation
• Body material: Steel
• Cord length: 1.7m
• Control output: 2 circuit 15A (usually, emergency situation)
• Buzzer: ON/OFF control available, Volume adjustment Available capacity
• Power supply: AC100V50/60Hz
• Power plug shape: 3P
• Outlet shape: 3P
• Model number: LB-ALT
• Size (mm): 220 x 100 x 105
• It alerts by lamp and buzzer.
• Pressing emergency stop button shuts off power to equipment while supplying power to other pieces of equipment.
• Emergency stop button is easy to press in an emergency.Turn button to reset it.
• In case of emergency, possible to connect rotating light etc. to the energizing side.
$0
Science Autoclave
AS ONE Corporation
• Temperature setting: 121 ? C / 132 ? C
• external dimension (mm): 330 x 340 x 510
• Canned body capacity: about 16 L
• Canned body Dimensions: f 240 ? 360 mm
• Sterilization pressure: (121 ? C) 0.1 MPa, (132 ? C) 0.2 MPa
• Timer setting: (121 ? C) 20 to 99 minutes, (132 ? C) 5 to 99 minutes
• Pressure gauge: Bourdon tube type, 0 to 0.4 MPa
• Control method: microcomputer control equation
• Safety devices: air firing prevention equipment, safety valves, overcurrent protection equipment, leakage protection protection, door lock detection, and overrising temperature protection
• material: exterior / steel (baked paint), can / stainless (SUS304)
• power supply: AC100V 50 / 60Hz 1200 W
• Weight: About 26 kg
• Accessories: Net cage (inner size f 190 x 265 mm), shelf board and drain tube (2m)
• 16 L
• * This product is not a medical device
• Model number: NCC-16 LV
• NCC16-LVB has the liquid sterilization mode.
• Performs sterilization with 2 types of temperature settings, and enables continuous sterilization in short time.
• Semi-automatic model with microcomputer control.
• Timer function available.
$0
Science Autoclave
AS ONE Corporation
• Temperature setting: 115 ? C / 121 ? C
• external dimension (mm): 330 x 340 x 510
• Canned body capacity: about 16 L
• Canned body Dimensions: f 240 ? 360 mm
• Sterilization pressure: (121 ? C) 0.1 MPa, (115 ? C) 0.07 MPa
• Timer setting: (115 ? C) 30 to 99 minutes, (121 ? C) 20 to 99 minutes
• Pressure gauge: Bourdon tube type, 0 to 0.4 MPa
• Control method: microcomputer control equation
• Safety devices: air firing prevention equipment, safety valves, overcurrent protection equipment, leakage protection protection, door lock detection, and overrising temperature protection
• material: exterior / steel (baked paint), can / stainless (SUS304)
• power supply: AC100V 50 / 60Hz 500 W
• Weight: About 26 kg
• Accessories: Net cage (inner size f 190 x 265 mm), shelf board and drain tube (2m)
• 16 L
• * This product is not a medical device
• Model Number: NCC-16 LVB
• NCC16-LVB has the liquid sterilization mode.
• Performs sterilization with 2 types of temperature settings, and enables continuous sterilization in short time.
• Semi-automatic model with microcomputer control.
• Timer function available.
$0
Science Autoclave
AS ONE Corporation
• Canned body material: stainless steel (Made in SUS304)
• Sterilization pressure: 0.1 MPa / (132 ? C) (121 ? C) 20 to 99 minutes, 0.2 MPa / 5 to 99 minutes
• Pressure gauge: Bourdon tube type 0 to 0.4 MPa
• Safety devices: air firing prevention equipment, safety valves, overcurrent protection equipment, leakage protection protection, door lock detection, and overrising temperature protection
• microcomputer control formula
• power supply: AC100V 50 / 60Hz 500 W
• Weight: About 12 kg
• Model number: NCC-1701
• external dimension (mm): 250 x 250 x 426
• Dimensions (mm): 150 x 220
• Accessories: The net cage, shelf board, and steam receiving container
• * This product is not a medical device.
• IEnables continuous sterilization in short time.
• Compact dimensions that takes little space, suitable for small amount of sterilization.
• Low-cost semi-automatic model with microcomputer control.
• 1701B has liquid sterilization mode preventing bumping during liquid or medium sterilization performed.
$0
Science Autoclave
AS ONE Corporation
• Temperature setting (? C): 115/121
• external dimension (mm): 250 x 250 x 426
• Canned body capacity: about 4L
• Canned body Dimensions: f 150 ? 220 mm
• Sterilization pressure: (121 ? C) 0.1 MPa, (132 ? C) 0.2 MPa
• Timer setting: (121 ? C) 20 to 99 minutes, (132 ? C) 5 to 99 minutes
• Pressure gauge: Bourdon tube type, 0 to 0.4 MPa
• Control method: microcomputer control equation
• Safety devices: air firing prevention equipment, safety valves, overcurrent protection equipment, leakage protection protection, door lock detection, and overrising temperature protection
• material: exterior / steel (baked paint), can / stainless (SUS304)
• power supply: AC100V 50 / 60Hz 1200 W
• Weight: About 14 kg
• Accessories: Net cage (130 x 200 mm), shelf board and drain tube (2m)
• * This product is not a medical device
• Model Number: NCC-1701 B
• IEnables continuous sterilization in short time.
• Compact dimensions that takes little space, suitable for small amount of sterilization.
• Low-cost semi-automatic model with microcomputer control.
• 1701B has liquid sterilization mode preventing bumping during liquid or medium sterilization performed.
$0
Aluminum Frame Equipment Table Three-Way Frame
AS ONE Corporation
• Size (mm): 600 x 600 x 800
• Material: 50 mm Aluminum Frame
• Load tolerance (equal load) : about 100 kg (Per unit)
• *By freely combining aluminum frames, it is possible to custom-make and increase the number of frames in the size and shape you want.
$0
Aluminum Frame Equipment Table Shelf
AS ONE Corporation
• Size (mm): 600 x 600 x 800
• Material: 50 mm Aluminum Frame
• Load tolerance (equal load) : about 150 kg (Per unit)
• *By freely combining aluminum frames, it is possible to custom-make and increase the number of frames in the size and shape you want.
$0
Large Water Bath
AS ONE Corporation
• Water tank: Material/stainless steel (SUS316), Capacity/7L
• Body material: Stainless steel (SUS304)
• Temperature controller: PID control
• Temperature settings range: Room temperature +5 - 80?
• Temperature controller timer: 0 - 99 hours 59 minutes (with equipment stop function)
• Temperature control system: Microcomputer PID control
• Temperature sensor: K class thermocouple
• Temperature display precision: +/- 2?
• Heater capacity: Sheathed heater 1000W
• Safety device: Temperature excessive rise prevention device, overcurrent prevention fuse
• Power supply: 100VAC 50/60Hz
• Power cord: 2.5m 3P plug (with 2P conversion adapter)
• Weight: 2.4kg
• Outer dimension (mm): 314 x 395 x 120
• Chamber dimensions (mm): f300 x 120
• *Demonstration equipment 3-1496-01 is available.
• Model number: BWB-300
• Possible to regulate temperature accurately and stably by means of PID control.
• With large width, it is suitable to use for evaporator.
• Because control unit is located on lateral side, stirrer and stirring drain board can be used in combination.
$0
VOLTEGA Power Stirrer
AS ONE Corporation
• Material: Body/SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 160 x 160mm
• Rotation speed: 60 - 1350rpm
• Motor: 3W
• Stirred capacity: 10L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 20W
• Main unit size *: 160 x 160 (171) x 111mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 2.2kg
• Phenol Resin top plate
• *Demonstration equipment is available (only 3-1492-01).
• Model number: VPS-160B
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.
$0
VOLTEGA Power Stirrer
AS ONE Corporation
• Material: Body/SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 200 x 200mm
• Rotation speed: 60 - 1350rpm
• Motor: 15W
• Stirred capacity: 20L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 40W
• Main unit size *: 200 x 200 (211) x 130mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 3.9kg
• Phenol Resin top plate
• *Demonstration equipment is available (only 3-1492-01).
• Model number: VPS-200B
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.
$0
VOLTEGA Power Stirrer
AS ONE Corporation
• Material: Body/SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 300 x 300mm
• Rotation speed: 60 - 1350rpm
• Motor: 40W
• Stirred capacity: 70L
• Magnet/strength (T): Neodymium/0.46
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 70W
• Main unit size *: 300 x 300 (310) x 165mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 8.8kg
• Phenol Resin top plate
• *Demonstration equipment is available (only 3-1492-01).
• Model number: VPS-300B
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.
$0
VOLTEGA Power Hot Stirrer
AS ONE Corporation
• Material: Body/SPCC (acrylic coating), Top board/aluminum (anodic oxide processing)
• Top board temperature range: Room temperature +5 - 300?
• Motor: Induction motor
• Temperature control system: PID control
• Timer setting range: 0 - 99 hours 59 minutes (with equipment stop function)
• Temperature display precision: +/- 2?
• Heater: Sheathed heater
• Safety device: Temperature excessive rise prevention device, overcurrent protection fuse
• Top board material: Aluminum (anodic oxide processing)
• Top board size: 190 x 190mm
• Rotation speed: 60 - 1350rpm
• Motor: 6W
• Stirred capacity: 10L
• Magnet/strength (T): Samarium-cobalt/0.37
• Heater capacity: 1000W
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 1050W
• Main unit size *: 193 x 193 (225) x 177mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 6.3kg
• Aluminum top board
• *Demonstration equipment is available (only 3-1494-01).
• Model number: VPHS-190A
$0
VOLTEGA Power Hot Stirrer
AS ONE Corporation
• Material: Body/SPCC (acrylic coating), Top board/aluminum (anodic oxide processing)
• Top board temperature range: Room temperature +5 - 300?
• Motor: Induction motor
• Temperature control system: PID control
• Timer setting range: 0 - 99 hours 59 minutes (with equipment stop function)
• Temperature display precision: +/- 2?
• Heater: Sheathed heater
• Safety device: Temperature excessive rise prevention device, overcurrent protection fuse
• Top board material: Aluminum (anodic oxide processing)
• Top board size: 230 x 230mm
• Rotation speed: 60 - 1350rpm
• Motor: 25W
• Stirred capacity: 20L
• Magnet/strength (T): Samarium-cobalt/0.37
• Heater capacity: 1300W
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 1350W
• Main unit size *: 233 x 233 (265) x 179mm (*() is the dimension including protrusions *Stirring capacity and rotation speed are the reference values if the target is water. *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose. )
• Weight: 9.9kg
• Aluminum top board
• *Demonstration equipment is available (only 3-1494-01).
• Model number: VPHS-230A
$0
Compact Draft 700
AS ONE Corporation
• main body material: PVC (vinyl chloride Plastic)
• power supply: AC100V 50 / 60Hz
• Maximum Power Consumption: 110/130 W (50 / 60Hz)
• Lighting: fluorescent lamps (10 W) x 1 piece
• Available inner size: 474 x 494 mm
• Sash opening surface: 620 x 575 mm
• Weight: 24.5 kg
• Aircraft pressure loss: 23 Pa
• * Required exhaust air volume: approx. 4 m3/min (Door 1/3 opening / speed approx. 0.5 m/s / activated charcoal unit not mounted) * It may vary depending on the working environment
• Accessories: Drainage hose (1 m) and hose nipple (outer diameter f 16 mm)
• Model number: CD7P-N
• No fan
• Plumbing: Yes
• PVC
• * Please contact your facility group for an application for local exhaust equipment
• ?30 (Excluding soil, days and holidays) <
• * A dedicated cart (Sales 3 -4056 ? 04) is easy to install and move.
• Air volume control type can adjust in 3-steps(strong?medium?weak) of exhaust air volume.
• Reducing fan noise and suppressing power consumption in accordance with using situation.
• Balance-weight type front door can be stopped in arbitrary position.
$0
Compact Draft 700
AS ONE Corporation
• main body material: PVC (vinyl chloride Plastic)
• power supply: AC100V 50 / 60Hz
• Maximum Power Consumption: 110/130 W (50 / 60Hz)
• Lighting: fluorescent lamps (10 W) x 1 piece
• Available inner size: 688 x 494 mm
• Sash opening surface: 620 x 575 mm
• Weight: 24.5 kg
• Aircraft pressure loss: 23 Pa
• * Required exhaust air volume: approx. 4 m3/min (Door 1/3 opening / speed approx. 0.5 m/s / activated charcoal unit not mounted) * It may vary depending on the working environment
• Model number: CD7P-NX
• No fan
• Plumbing: None
• PVC
• * Please contact your facility group for an application for local exhaust equipment
• ?30 (Excluding soil, days and holidays) <
• * A dedicated cart (Sales 3 -4056 ? 04) is easy to install and move.
• Air volume control type can adjust in 3-steps(strong?medium?weak) of exhaust air volume.
• Reducing fan noise and suppressing power consumption in accordance with using situation.
• Balance-weight type front door can be stopped in arbitrary position.
$0
Compact Draft
AS ONE Corporation
• Material: Body, scrubber / stainless (SUS304), door / transparent PVC (vinyl chloride Plastic)
• external dimension: 700 x 625 x 1800 mm
• Available inner size: 698 x 498 x 675 mm
• Sash opening: 620 x 600 mm
• Uniform work plane Load tolerance: 20 kg
• Filter (filler) Weight: about 750 g / book
• Interior lighting: fluorescent lamps (15 W) x 1 piece
• air volume: 4 m3/min (Door 1/3 open, 0.5 m/s face speed without load) * It may vary depending on the working environment
• power supply: AC100V 50 / 60Hz
• Nagayoshi power cord: 2.5 m (With 3P plug OA adapter)
• Power Consumption: 140/215 W (50 / 60Hz)
• Operating sound: about 65 dB
• Weight: About 78 kg
• Suitable duct diameter: f 100 mm
• Water supply port: Rp 1/2 (outer diameter f 16 mm step drill)
• Wastewater: 30 mm x hose 2 m attached
• Model number: CD7S-W
• Standard fan
• Plumbing: Yes
• A stainless steel dry type scrubber
• * It comes with 4 GM of activated carbon filter neutral gas for exchange
• * Shipping, carrying, installation and assembly costs are required separately. Please contact us
• * Please contact your facility group for an application for local exhaust equipment
• ?<
• Compact fume hood incorporating activated carbon adsorption filter is environmentally friendly, and assures safety.
• Because adsorbent can be selected in accordance with target gas, it can treat exhaust gas with high removal efficiency.
• Cartridge type adsorbent can be easily attached, removed and replaced.
• Balance-weight type door can be stopped in arbitrary position and vertical direction.
• Slide damper provided inside fume hood allows adjustment of exhaust air volume to improve safety.
$0
Compact Draft
AS ONE Corporation
• Material: Body, scrubber / stainless (SUS304), door / transparent PVC (vinyl chloride Plastic)
• external dimension: 700 x 625 x 1800 mm
• Available inner size: 698 x 498 x 675 mm
• Sash opening: 620 x 600 mm
• Uniform work plane Load tolerance: 20 kg
• Filter (filler) Weight: about 750 g / book
• Interior lighting: fluorescent lamps (15 W) x 1 piece
• air volume: 4 m3/min (Door 1/3 open, 0.5 m/s face speed without load) * It may vary depending on the working environment
• power supply: AC100V 50 / 60Hz
• Nagayoshi power cord: 2.5 m (With 3P plug OA adapter)
• Power Consumption: 140/215 W (50 / 60Hz)
• Operating sound: about 65 dB
• Weight: About 78 kg
• Suitable duct diameter: f 100 mm
• Model number: CD7S-WX
• Fan specification: Standard fan
• Plumbing: None
• A stainless steel dry type scrubber
• * It comes with 4 GM of activated carbon filter neutral gas for exchange
• * Shipping, carrying, installation and assembly costs are required separately. Please contact us
• * Please contact your facility group for an application for local exhaust equipment
• ?<
• Compact fume hood incorporating activated carbon adsorption filter is environmentally friendly, and assures safety.
• Because adsorbent can be selected in accordance with target gas, it can treat exhaust gas with high removal efficiency.
• Cartridge type adsorbent can be easily attached, removed and replaced.
• Balance-weight type door can be stopped in arbitrary position and vertical direction.
• Slide damper provided inside fume hood allows adjustment of exhaust air volume to improve safety.
$0
Kimwipes S-200, ? Ray Sterilized 120 x 215mm
AS ONE Corporation
• Model number: S-200, ? ray sterilized
• Sheet size (mm): 120 x 215
• Quantity: 1 box (200 sheets)
• Material: Pulp 100%
• Package: Individual packaging
• 10kGy gamma ray sterilized
• *There is a smell and discoloring from body according to gamma ray.
• Ideal for wiping down electronic components and precision equipment.
• Leaves no dust or fluff on wiped surfaces
$0