Magnetic Stirrer & Hotplate Stirrer

• B-1 controller
• Corresponding stirrer: B-1
• Number of output terminals: f2.5mm mini jack x 4 pieces
• Output system: 4 output single speed
• Control system: Electronic circuit rotation speed open loop structure
• Size: 95 x 158 x 56mm
• Power supply: 100VAC 50/60Hz
• Model number: CB-4
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers

• Stirrer body (small)
• Stirred capacity: 10 - 1000mL
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Size: 70 x 70 x 29mm
• Used temperature: 0 - 60? (underwater)
• Structure: Silicone mold waterproof sealed structure
• Body material: PP (polypropylene) integral molding
• Cord: 1m x f2.5mm mini plug attached
• Model number: S-1
• Accessories: Joint bar x 1 piece
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers

• Stirrer body (large)
• Stirred capacity: 50 - 3000mL
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Size: 155 x 155 x 45mm
• Used temperature: 0 - 60? (underwater)
• Structure: Silicone mold waterproof sealed structure
• Body material: PP (polypropylene) integral molding
• Cord: 1m x f2.5mm mini plug attached
• Model number: B-1
• Accessories: Joint bar x 1 piece
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers

• Stirrer for S-1
• Model number: Joint bar
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers

• Stirrer for B-1
• Model number: Joint bar
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers

• Model number: HM-1N
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Flat attachment x 1 piece, attachment base x 1 piece
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).

• Model number: HM-1FN
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Single/flat/tube attachment x 1 piece each, attachment/microplate/stirrer base x 1 piece each
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).

• Model number: HM-2N
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Flat attachment x 1 piece, attachment base x 1 piece
• Rotation speed display: LED 10 steps
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).

• Rotation speed (rpm): 100 to 1000
• Agitated capacity (mL): 3000
• top board Size : 165 x 150mm
• Plate material: Stainless steel SUS304
• Motor: DC brush motor
• Power supply: Phone/AC100V 50/60Hz (AC adapter included) , Battery Pack/AA size battery x 8 pieces (test attachment)
• Main unit size: 165 x 153 x 53mm (protrusion not included)
• Weight: Main unit/approx. 1kg
• Magnet strength: about 0.1 T
• Accessories: Teflon stirrer bar (30mm) x 1 piece

• Stirrer body
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Material: Stirrer exterior/PP (polypropylene), Top board, support/stainless steel (SUS304)
• Size: Stirrer part/100 x 135 x 30mm, Mounting arm/f8 x 215mm
• Cord length: 1m (f2.5mm mini plug attached)
• Weight: 480g
• Model number: S-1A
• *CS-1, CS-4, and holder are not included in the package.
• The remote controller can be put on the desk, and improves the operability.
• The controller gives 4 outputs, and allows connection of up to 4 stirrers.

• Model number: HI-1000
• Highest temperature: 300 ?
• Plate size: 400 x 300mm
• Plate material: Aluminum
• Control system: PID control
• Temperature distribution width: Within 4?
• Main unit size: 450 x 350 x 135mm
• Heater capacity: 900W
• Power supply: 100VAC 50/60Hz 10A (2P plug)
• Withstand load: Approx 10kg
• Weight: 8kg

• Size: 230 x 295 x 130mm
• Rotation speed setting range: 100 - 1500rpm (setting resolution: 10rpm)
• Number of stirring: 4
• Temperature settings range: 0 - 350? (setting resolution: 1?)
• Temperature control system: Microcomputer type PID control
• Internal sensor: K class thermocouple
• Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit)
• Plate size: 210 x 210mm
• Plate material: Aluminum die cast (ceramic coating finish)
• Heater capacity: 1100W
• Power supply: 100VAC 50/60Hz
• Weight: 8.1kg
• Model number: DP-1M
• *Stirrer bar is not included in the package.

• Specification: Replacement Mounting Knob Screw

• Model number: TH-900
• Highest temperature: 300 ?
• Plate size: 150 x 200mm (3 sides)
• Plate material: Aluminum (anodic oxide processing)
• Temperature distribution width: Within 5?
• Control system: PID control
• Main unit size: 530 x 270 x 137mm
• Weight: 11.5kg
• Withstand load: Approximately 3kg (1 plate)
• Heater capacity: 450W x 3
• Power supply: AC100V 50/60Hz15A
• Power cord length: 2.5m (3P, with ground pin)
• (3 tandem type)
• Possible for temperature control independently as 3 plates.

• Model number: MH-180CS
• Highest temperature: 300 ?
• Plate size: 200 x 150mm
• Plate material: Aluminum (anodic oxide surface processing)
• Hot plate
• Temperature distribution width: Within 5?
• Controller temperature display precision: +/- 1% (SV) + 1 digit error
• Heater capacity: 450W
• Temperature control system: PID control
• Power supply: 100VAC 50/60Hz
• Weight: 3.5kg
• Accessories: Controller connection cable 2m x 1
• Main unit size: 250 x 200 x 90mm
• *You cannot use this alone. Purchase a controller.

• Model number: MH-3CS
• Controller
• Temperature display precision: +/- 1% (SV) + 1 digit error
• Control system: PID control
• Power supply: 100VAC 50/60Hz
• Weight: 2.5kg
• Main unit size: 150 x 250 x 87mm
• *You cannot use a controller alone. Purchase it with a main unit.

• Model number: EC-7050
• Highest temperature: 300 ?
• Plate size: 700 x 500mm
• Plate material: Aluminum
• Power supply: AC200V?10% 50/60Hz
• Temperature sensor: K class thermocouple
• Main unit size: 750 x 550 x 162mm
• Heater capacity: 2.6kW
• Withstand load: Approx 25kg (however, distributed load to 80% of plate area)
• Weight: Approx 30kg
• Power cord length: Approx 2m
• Outlet shape: Single phase 200V with an earth
• *Please be careful of power and outlet shape.
• Control Panel : English
• The timer set of 3patterns is possible.
• Quantity more than offer can products be heated at once by large-sized top plate.
• Preset temperature and current temperature can check at a glance by 2steps display.

• Material: Stainless steel (SUS304)
• Withstand load: 20kg (equal load)
• Allowable temperature limit: 250?
• Size: f350 x 250 x 110mm
• Model number: KO-3
• With this stand, large container such as cooler box or heavy object(10*kg* or more) can be put on the stirrer.
• Put this stand on stirrer for heat insulation when putting object whose bottom temperature is 100? or more, such as oil bath.
• Use this stand as frame for stirring large vessel which cannot be put directly on stirrer.

• Same rotation control
• Number of stirring: 4
• Size: 499 x 100 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSS-4
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.

• Same rotation control
• Number of stirring: 5
• Size: 499 x 190 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSS-8
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.