Magnetic Stirrer & Hotplate Stirrer

• Model number: NMS-05
• Stirring capacity (L): - Approximately 0.5
• Rotation speed (rpm): MAX about 1500
• Material: ABS resin
• Body dimensions: 101 x 140 x 51mm
• Motor: DC brushless motor
• Power supply: 100 - 240VAC 50/60Hz (AC adapter)
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Long lifetime with a brushless motor adoption.
• Rotation speed is non-step adjustable.

• Model number: NMS-2
• Stirring capacity (L): - Approximately 2
• Rotation speed (rpm): MAX about 1500
• Material: ABS resin
• Body dimensions: 128 x 175 x 49mm
• Motor: DC brushless motor
• Power supply: 100 - 240VAC 50/60Hz (AC adapter)
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Long lifetime with a brushless motor adoption.
• Rotation speed is non-step adjustable.

• Model number: VPS-160BD
• Main unit size (mm): 160 x 160 (171) x 111
• Top board size (mm): 160 x 160
• Material: SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 160 x 160mm
• Rotation speed: 60 - 1350rpm
• Motor: 3W
• Stirred capacity: 10L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 20/25W
• Main unit size: 160 x 160 (171) x 111mm (Size including projections is described in ())
• Weight: 2.2/2.4kg
• *Stirring capacity and recommended stirring bars are indicated when the target is water.
• *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose.
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.

• Model number: VPS-200BD
• Main unit size (mm): 200 x 200 (211) x 130
• Top board size (mm): 200 x 200
• Material: SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 200 x 200mm
• Rotation speed: 60 - 1350rpm
• Motor: 15W
• Stirred capacity: 20L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 40/45W
• Main unit size: 200 x 200 (211) x 130mm (Size including projections is described in ())
• Weight: 3.9/4.1kg
• *Stirring capacity and recommended stirring bars are indicated when the target is water.
• *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose.
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.

• Model number: VPS-300BD
• Main unit size (mm): 300 x 300 (310) x 165
• Top board size (mm): 300 x 300
• Material: SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 300 x 300mm
• Rotation speed: 60 - 1350rpm
• Motor: 40W
• Stirred capacity: 70L
• Magnet/strength (T): Neodymium/0.46
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 70/75W
• Main unit size: 300 x 300 (310) x 165mm (Size including projections is described in ())
• Weight: 8.8/9.2kg
• *Stirring capacity and recommended stirring bars are indicated when the target is water.
• *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose.
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.

• Model number: Fittings for support rod
• Insulation board is placed on stainless steel top plate, which enables stirring while oil bath is placed on it.
• With strong magnet and induction motor, possible to stir high viscosity and large capacity liquid.
• Feedback control by tacho generator, provides stable rotation from low speed to high speed.
• It provides stable rotation even in low rotation speed range.
• Adjustment dial is analog type that can set speed in proportion to dial scale.
• Dedicated fixing bracket can be attached on the back side, and by combining with support rod, it can be used as stand.

• Model number: Support rod (f16 x 450mm)
• Main unit size (mm): Support rod (f16 x 450mm)
• Top board size (mm): Support rod (f16 x 450mm)
• Insulation board is placed on stainless steel top plate, which enables stirring while oil bath is placed on it.
• With strong magnet and induction motor, possible to stir high viscosity and large capacity liquid.
• Feedback control by tacho generator, provides stable rotation from low speed to high speed.
• It provides stable rotation even in low rotation speed range.
• Adjustment dial is analog type that can set speed in proportion to dial scale.
• Dedicated fixing bracket can be attached on the back side, and by combining with support rod, it can be used as stand.

• Model number: NHA-3030
• Highest temperature (?): 350
• Plate size (mm): 300 x 300
• Plate material: Aluminum
• Control system: PID control
• Temperature distribution width: 6? (at 300?)
• Main unit size: 350 x 350 x 135mm
• Heater capacity: 1400W
• Power supply: 100VAC 50/60Hz 15A (2P plug)
• Withstand load: 10kg
• Weight: Approx 7kg
• Compared with general hot plate, max. temperature 350? and gives room for margin.
• With compact body, there is flexibility in handling.

• Specification: Simultaneous control (3 output)
• Material: Steel
• Outer dimensions: 86 x 116 (Dimensions with protrusion: 126) x 39mm
• Power supply: AC100 to 240 V 50/60Hz (AC Adapter)
• Connection cord length: 1.5 m
• Accessories: AC Adapter
• *The stirrer is not included in the controller.
• Stable low rotation for small containers!
• Stable rotation is possible even at low speed.
• Suitable for stirring small containers such as cuvettes.

• Specification: Individual control (3 output)
• Material: Steel
• Outer dimensions: 86 x 116 (Dimensions with protrusion: 126) x 39mm
• Power supply: AC100 to 240 V 50/60Hz (AC Adapter)
• Connection cord length: 1.5 m
• Accessories: AC Adapter
• *The stirrer is not included in the controller.
• Stable low rotation for small containers!
• Stable rotation is possible even at low speed.
• Suitable for stirring small containers such as cuvettes.

• Specification: 50 to 1500rpm
• Rotation speed: 50 to : 1500rpm
• Size: f23 x 29mm
• Motor: core less motor
• Capacity: 10mL
• Material: Aluminium, silicone Mold
• Stirring system: Magnetic rotary stirring
• Recommended stirrer bar: f2 x 5mm, f2 x 7mm, f3 x 6mm, f3 x 8mm, f4 x 6mm
• *The stirrer does not come with the controller itself.
• Stable low rotation for small containers!
• Stable rotation is possible even at low speed.
• The bottom of the stirrer is silicon mold, so it is stable.
• Suitable for stirring small containers such as cuvettes.

• Agitated capacity (mL): 300
• Size (mm): 60 x 60 x 60
• Rotation speed: 300 to : 1500rpm
• Motor: DC brush motor (interchangeable)
• Magnet: Neodymium magnet (0.41 T)
• top board material : SUS304
• Load tolerance: 1kg
• top board size : 50 x 60mm
• Main Weight: 0.5kg
• Power supply: AC100-240V 50/60Hz (AC adapter included)
• Recommended stirrer bar: f3 x 5mm to f8 x 25mm
• Example of stirrer bar that can be used as the main unit
• *f3 x 6mm (1 -3252 - 03, 3 -6659 - 02)
• *f2 x 7mm (1 -3252 - 04)
• *f3 x 8mm (1 -3252 - 05)
• *f3 x 10mm (3 -6659 01)
• *f4 x 6mm (7 -218 01)
• *f4 x 10mm (1 -4206 - 01, 9 -870 - 01)
• *f5 x 15mm (1 -4206 - 02)
• *f8 x 25mm (1 -4206 - 04)
• *The main unit size does not have projections.
• *The length of the suitable agitator and the agitator capacity are approximate. It depends on the shape of the stirrer, solution and container.
• *No agitator included.
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Specification: Replacement Motor Set

• Capacity (mL): 100 x 4
• Size (mm): 120 x 128 x 60
• Rotation speed: 300 to : 1500rpm
• Motor: DC brush motor (interchangeable)
• Magnet: Neodymium magnet (0.41 T)
• top board material : SUS304
• Load tolerance: 2kg
• top board size : 120 x 120mm
• Main Weight: 1.0kg
• Power supply: AC100-240V 50/60Hz (AC adapter included)
• Recommended stirrer bar: f3 x 5mm to f8 x 25mm
• Example of stirrer bar that can be used as the main unit
• *f3 x 6mm (1 -3252 - 03, 3 -6659 - 02)
• *f2 x 7mm (1 -3252 - 04)
• *f3 x 8mm (1 -3252 - 05)
• *f3 x 10mm (3 -6659 01)
• *f4 x 6mm (7 -218 01)
• *f4 x 10mm (1 -4206 - 01, 9 -870 - 01)
• *f5 x 15mm (1 -4206 - 02)
• *f8 x 25mm (1 -4206 - 04)
• *The main unit size does not have projections.
• *The length of the suitable agitator and the agitator capacity are approximate. It depends on the shape of the stirrer, solution and container.
• *No agitator included.
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Capacity (mL): 100 x 8
• Size (mm): 240 x 128 x 60
• Rotation speed: 300 to : 1500rpm
• Motor: DC brush motor (interchangeable)
• Magnet: Neodymium magnet (0.41 T)
• top board material : SUS304
• Load tolerance: 2kg
• top board size : 240 x 120mm
• Main Weight: 1.5kg
• Power supply: AC100-240V 50/60Hz (AC adapter included)
• Recommended stirrer bar: f3 x 5mm to f8 x 25mm
• Example of stirrer bar that can be used as the main unit
• *f3 x 6mm (1 -3252 - 03, 3 -6659 - 02)
• *f2 x 7mm (1 -3252 - 04)
• *f3 x 8mm (1 -3252 - 05)
• *f3 x 10mm (3 -6659 01)
• *f4 x 6mm (7 -218 01)
• *f4 x 10mm (1 -4206 - 01, 9 -870 - 01)
• *f5 x 15mm (1 -4206 - 02)
• *f8 x 25mm (1 -4206 - 04)
• *The main unit size does not have projections.
• *The length of the suitable agitator and the agitator capacity are approximate. It depends on the shape of the stirrer, solution and container.
• *No agitator included.
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)