Magnetic Stirrer & Hotplate Stirrer

• B-1 controller
• Corresponding stirrer: B-1
• Number of output terminals: f2.5mm mini jack x 4 pieces
• Output system: 4 output single speed
• Control system: Electronic circuit rotation speed open loop structure
• Size: 95 x 158 x 56mm
• Power supply: 100VAC 50/60Hz
• Model number: CB-4
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers

• Stirrer body (small)
• Stirred capacity: 10 - 1000mL
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Size: 70 x 70 x 29mm
• Used temperature: 0 - 60? (underwater)
• Structure: Silicone mold waterproof sealed structure
• Body material: PP (polypropylene) integral molding
• Cord: 1m x f2.5mm mini plug attached
• Model number: S-1
• Accessories: Joint bar x 1 piece
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers

• Stirrer body (large)
• Stirred capacity: 50 - 3000mL
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Size: 155 x 155 x 45mm
• Used temperature: 0 - 60? (underwater)
• Structure: Silicone mold waterproof sealed structure
• Body material: PP (polypropylene) integral molding
• Cord: 1m x f2.5mm mini plug attached
• Model number: B-1
• Accessories: Joint bar x 1 piece
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers

• Stirrer for S-1
• Model number: Joint bar
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers

• Stirrer for B-1
• Model number: Joint bar
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integrally molded by PP (polypropylene), it is excel in chemical resistance.
• It is capable of connecting to each other by a stirrer bar joint.
•
• It is possible to operate four stirrer at the same rotational speed.
•
• Possible to control 4stirrers in separate rotation speed.
• By remote-control, the controller can use it to put on desk that is easily operated.
• The controller is 4-outputs, can connect up to 4stirrers

• Model number: HM-1N
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Flat attachment x 1 piece, attachment base x 1 piece
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).

• Model number: HM-1FN
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Single/flat/tube attachment x 1 piece each, attachment/microplate/stirrer base x 1 piece each
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).

• Model number: HM-2N
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Flat attachment x 1 piece, attachment base x 1 piece
• Rotation speed display: LED 10 steps
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).

• Rotation speed (rpm): 100 to 1000
• Agitated capacity (mL): 3000
• top board Size : 165 x 150mm
• Plate material: Stainless steel SUS304
• Motor: DC brush motor
• Power supply: Phone/AC100V 50/60Hz (AC adapter included) , Battery Pack/AA size battery x 8 pieces (test attachment)
• Main unit size: 165 x 153 x 53mm (protrusion not included)
• Weight: Main unit/approx. 1kg
• Magnet strength: about 0.1 T
• Accessories: Teflon stirrer bar (30mm) x 1 piece

• Stirrer body
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Material: Stirrer exterior/PP (polypropylene), Top board, support/stainless steel (SUS304)
• Size: Stirrer part/100 x 135 x 30mm, Mounting arm/f8 x 215mm
• Cord length: 1m (f2.5mm mini plug attached)
• Weight: 480g
• Model number: S-1A
• *CS-1, CS-4, and holder are not included in the package.
• The remote controller can be put on the desk, and improves the operability.
• The controller gives 4 outputs, and allows connection of up to 4 stirrers.

• Size: 230 x 295 x 130mm
• Rotation speed setting range: 100 - 1500rpm (setting resolution: 10rpm)
• Number of stirring: 4
• Temperature settings range: 0 - 350? (setting resolution: 1?)
• Temperature control system: Microcomputer type PID control
• Internal sensor: K class thermocouple
• Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit)
• Plate size: 210 x 210mm
• Plate material: Aluminum die cast (ceramic coating finish)
• Heater capacity: 1100W
• Power supply: 100VAC 50/60Hz
• Weight: 8.1kg
• Model number: DP-1M
• *Stirrer bar is not included in the package.

• Specification: Replacement Mounting Knob Screw

• Material: Stainless steel (SUS304)
• Withstand load: 20kg (equal load)
• Allowable temperature limit: 250?
• Size: f350 x 250 x 110mm
• Model number: KO-3
• With this stand, large container such as cooler box or heavy object(10*kg* or more) can be put on the stirrer.
• Put this stand on stirrer for heat insulation when putting object whose bottom temperature is 100? or more, such as oil bath.
• Use this stand as frame for stirring large vessel which cannot be put directly on stirrer.

• Model number: ST-200
• Rotation speed (rpm): 0 - 3000
• Maximum torque (N?m): 0.68 (7.0kg?cm)
• Motor output: DC210W
• Power supply: 100VAC 50/60Hz
• Power cord length: 1.6m
• Main unit size: 125 x 265 x 270mm
• Weight: 10kg
• Tachometer: LED display
• With thermal breaker fuse
• Accessories: Stand, Stirring rod f8 x 500mm, Soluble type stirring blade f50mm
• Features easy-to-see digital display of rotation speed.
• Smooth speed change from low speed to high speed is possible.
• Comes with thermal circuit breaker to protect motor from overload operation and overheating.

• Rotation speed: 10 - 600rpm (with adjustment mechanism/digital display)
• Rotation direction control: Forward/reverse switching function and automatic inversion function
• Motor: High torque brushless motor (60W)
• Material: Desiccator/transparent PMMA (acrylic) resin, Lower stirrer/steel baking coating
• Operating temperature range: Sample temperature 100? or lower
• Stirred available viscosity: 1 - 100000cP
• Power supply: 100VAC 50/60Hz
• Internal dimensions: 260 x 180 x 260mm
• Stirred available viscosity: 1 - 100000cP
• Size (mm): 300 x 230 x 535
• Accessories: Slip prevention sheet (Silicone) x 1 sheet, Hyper stir bar (HSB-2) x 1 piece, 3P->2P conversion adapter x 1 piece
• Model number: VDS-1N
• The unit can stir a super high viscosity liquid by using hyper stirrer.
• A reverse rotation function and an automatic inversion function are implemented.
• The user can observe the internal state because it is made of clear acryl.

• Top board highest temperature: 250?
• Temperature control system: ON/OFF control by K thermocouple
• Heater capacity: 500W
• Motor: DC brush motor
• Power supply: 100VAC 50/60Hz
• Body material: ABS resin
• Plate size: 210 x 210mm
• Size: 232 x 275 x 111mm
• Model number: CT-5HAT
• Rotation speed (rpm): MAX1500
• Recommended stirring capacity (L): - Approximately 5
• *Stirrer bar is not included in the package.
• It is general-purpose hot stirrer suitable for stirring while heating.
• Since body casing is made of PP (polypropylene), excellent in chemical resistance and heat resistance(3HAT).
• Since top plate is made of aluminum, it is excel in durability and thermal efficiency.

• Motor: DC brush motor
• Body material: PP (Polypropylene)
• Power supply: AC 100 - 240V, 50/60Hz
• Size: 85 x 130 x 57mm
• Model number: CT-MINI
• Rotation speed (rpm): MAX about 1500
• Recommended stirring capacity (L): - Approximately 0.3
• *Stirrer bar is not included in the package.
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• By strong magnet, it boasts sufficient stirring ability.
• Body casing is made of PP(polypropylene), excellent in chemical resistance(MINI?1AT?3AT).

• Motor: DC brush motor
• Body material: PP (Polypropylene)
• Power supply: AC 100 - 240V, 50/60Hz
• Size: 120 x 150 x 57mm
• Model number: CT-1AT
• Rotation speed (rpm): MAX about 1500
• Recommended stirring capacity (L): - Approximately 1
• *Stirrer bar is not included in the package.
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• By strong magnet, it boasts sufficient stirring ability.
• Body casing is made of PP(polypropylene), excellent in chemical resistance(MINI?1AT?3AT).

• Motor: DC brush motor
• Body material: PP (Polypropylene)
• Power supply: AC 100 - 240V, 50/60Hz
• Size: 178 x 190 x 85mm
• Model number: CT-3AT
• Rotation speed (rpm): MAX about 1500
• Recommended stirring capacity (L): - Approximately 3
• *Stirrer bar is not included in the package.
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• By strong magnet, it boasts sufficient stirring ability.
• Body casing is made of PP(polypropylene), excellent in chemical resistance(MINI?1AT?3AT).

• Motor: DC brush motor
• Body material: ABS resin
• Power supply: AC 100 - 240V, 50/60Hz
• Size: 232 x 275 x 83mm
• Model number: CT-5AT
• Rotation speed (rpm): MAX about 1500
• Recommended stirring capacity (L): - Approximately 5
• *Stirrer bar is not included in the package.
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• By strong magnet, it boasts sufficient stirring ability.
• Body casing is made of PP(polypropylene), excellent in chemical resistance(MINI?1AT?3AT).