Control Software
Constant-Temperature Drying Oven (Program Type, Forced Convection System) With Window (Left Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 450 x 447 x 450
• Door: Left
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 45 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 23 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1300W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/10 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 550 x 567 x 760mm
• Inner capacity: about 91L
• Weight: about 40kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 13.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) With Window (Left Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 600 x 497 x 500
• Door: Left
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 55 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1.5 ?C (at 270 ?C)
• Temperature gradient (JIS): 25 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1400W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/11 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 2 pieces
• Outer dimensions: 700 x 617 x 810mm
• Inner capacity: about 150L
• Weight: about 50kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 14.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) With Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 300 x 327 x 300
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 20 minutes
• Temperature distribution (JTM K05): ?3 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 10 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1100W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• Tana pitch number of step mm: 35 pitch 6 stages
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 400 x 447 x 610mm
• Inner capacity: about 25L
• Weight: about 25kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 11.5 A
• shelf board, load tolerance: 15kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operayion.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature manaegement, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) With Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 450 x 447 x 450
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 45 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1 ?C (at 270 ?C)
• Temperature gradient (JIS): 23 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1300W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/10 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 1 piece
• Outer dimensions: 550 x 567 x 760mm
• Inner capacity: about 91L
• Weight: about 40kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 13.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Constant-Temperature Drying Oven (Program Type, Forced Convection System) With Window (Right Pivot Door)
AS ONE Corporation
• Inner dimensions (mm): 600 x 497 x 500
• Door: right
• Temperature control range: R.T. + 20 to 270 ?C
• Maximum temperature arrival time: about 55 minutes
• Temperature distribution (JTM K05): ?8 ?C (at 270 ?C)
• Temperature fluctuation (JIS): ?1.5 ?C (at 270 ?C)
• Temperature gradient (JIS): 25 ?C (at 270 ?C)
• Temperature control method: PID control, SSR output
• Additional function: Program specification ? Up to 8 steps x 4 patterns of program functions
• Safety device: Digital setting type overrise prevention function, overcurrent breaker burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 1400W
• Temperature sensor: K class thermocouple x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/mm number of step: 35 pitch/11 Dan
• Exterior/Interior: Steel powder coating/Stainelss steel SUS304 (Partly applied stainless steel SUS443J1)
• Air outlet: f32mm x 2 pieces
• Outer dimensions: 700 x 617 x 810mm
• Inner capacity: about 150L
• Weight: about 50kg
• Power supply: AC100V 50/60Hz Cord length : 2.4 m (3P plug)
• rated current: 14.5 A
• shelf board, load tolerance: 5kg
• Accessories: shelf board x 2 pieces/shelf board rail x 2 sets
• Forced convection system
• Enable to choose from 3 sizes.
• The basic type has been remodeled.
• Equipped with digital safety device as standard
• Vivid large LCD screen
• Uses color LCD display with excellent visibility for improved operation.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Four types of timer functions (ON/OFF/ON/OFF/SV start) are provided as standard, and four types can be selected according to the sample volume and size.
• Uses PID control for temperature management, enabling high-precision and stable temperature control.
$0
Vacuum Dryer (V Series)
AS ONE Corporation
• Inner capacity (L): 8
• Additional function: Timer function (ON/OFF/ON/OFF timer and SV start)
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• material
• *Exterior: Steel baked paint
• *Interior: SUS304
• *shelf board: Aluminium
• *Valves, Piping, Fittings: brass (C -3771, C -3604)
• *Vacuum gauge: brass (C 2680 TW, C 3604 BD)
• *Door packing: silicone rubber
• *Observation window: tempered glass (Thickness 12mm), protective plate made of polycarbonate
• Outer dimensions (mm): 343 x 376 x 509
• Inner dimensions (mm): 200 x 200 x 200
• Heater capacity: 800W
• Power supply: AC100V 50/60Hz 8A
• Power cord length: 2.5 m
• Weight: about 25kg
• Accessories: shelf board x 2 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
• Standard vacuum dryer model.
• To facilitate piping and operation, a vacuum pump connection valve and vacuum gauge are placed on the front operation panel.
• Double door of reinforced glass door and protective polycarbonate door is adopted.
• Uses heat-resistant packing for excellent durability and airtightness.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Standard model that can be set digitally for temperature control and over temperature rise prevention.
$0
Vacuum Dryer (V Series)
AS ONE Corporation
• Inner capacity (L): 15
• Additional function: Timer function (ON/OFF/ON/OFF timer and SV start)
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• material
• *Exterior: Steel baked paint
• *Interior: SUS304
• *shelf board: Aluminium
• *Valves, Piping, Fittings: brass (C -3771, C -3604)
• *Vacuum gauge: brass (C 2680 TW, C 3604 BD)
• *Door packing: silicone rubber
• *Observation window: tempered glass (Thickness 12mm), protective plate made of polycarbonate
• Outer dimensions (mm): 393 x 426 x 559
• Inner dimensions (mm): 250 x 250 x 250
• Heater capacity: 800W
• Power supply: AC100V 50/60Hz 8A
• Power cord length: 2.5 m
• Weight: about 33kg
• Accessories: shelf board x 2 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
• Standard vacuum dryer model.
• To facilitate piping and operation, a vacuum pump connection valve and vacuum gauge are placed on the front operation panel.
• Double door of reinforced glass door and protective polycarbonate door is adopted.
• Uses heat-resistant packing for excellent durability and airtightness.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Standard model that can be set digitally for temperature control and over temperature rise prevention.
$0
Vacuum Dryer (V Series)
AS ONE Corporation
• Inner capacity (L): 30
• Additional function: Timer function (ON/OFF/ON/OFF timer and SV start)
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• material
• *Exterior: Steel baked paint
• *Interior: SUS304
• *shelf board: Aluminium
• *Valves, Piping, Fittings: brass (C -3771, C -3604)
• *Vacuum gauge: brass (C 2680 TW, C 3604 BD)
• *Door packing: silicone rubber
• *Observation window: tempered glass (Thickness 12mm), protective plate made of polycarbonate
• Outer dimensions (mm): 453 x 486 x 619
• Inner dimensions (mm): 310 x 310 x 310
• Heater capacity: 1360W
• Power supply: AC100V 50/60Hz 14 A
• Power cord length: 2.5 m
• Weight: about 45kg
• Accessories: shelf board x 2 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
• Standard vacuum dryer model.
• To facilitate piping and operation, a vacuum pump connection valve and vacuum gauge are placed on the front operation panel.
• Double door of reinforced glass door and protective polycarbonate door is adopted.
• Uses heat-resistant packing for excellent durability and airtightness.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Standard model that can be set digitally for temperature control and over temperature rise prevention.
$0
Vacuum Dryer (V Series)
AS ONE Corporation
• Inner capacity (L): 91
• Additional function: Timer function (ON/OFF/ON/OFF timer and SV start)
• Sensor: K class thermocouple x 2 pieces (1 each for temperature control and overheating prevention)
• Safety device: Over-rise prevention function (digital setting type), self-diagnosis function (Heater disconnection detection and sensor error detection), overcurrent breaker
• material
• *Exterior: Steel baked paint
• *Interior: SUS304
• *shelf board: Aluminium
• *Valves, Piping, Fittings: brass (C -3771, C -3604)
• *Vacuum gauge: brass (C 2680 TW, C 3604 BD)
• *Door packing: silicone rubber
• *Observation window: tempered glass (Thickness 15mm), protective plate made of polycarbonate
• Outer dimensions (mm): 594 x 630 x 770
• Inner dimensions (mm): 450 x 450 x 450
• Heater capacity: 1680W
• Power supply: Single-phase AC 200V 50/60Hz 8.4 A
• Power cord length: 4.0 m
• Weight: about 105kg
• Accessories: shelf board x 3 pieces
• Heating system: Can body heating system
• Temperature settings range: 40 to: 220 ?C
• Vacuum range: 0.1 to 101kPa
• Control method: PID control and SSR output
• Valve diameter: outer diameter f13 mm
• Standard vacuum dryer model.
• To facilitate piping and operation, a vacuum pump connection valve and vacuum gauge are placed on the front operation panel.
• Double door of reinforced glass door and protective polycarbonate door is adopted.
• Uses heat-resistant packing for excellent durability and airtightness.
• In addition to the PV/SV two-stage display, which makes it easy to check measured and set values, the set temperature display is used to prevent excessive temperature rise.
• Standard model that can be set digitally for temperature control and over temperature rise prevention.
$0
Hot Stirrer
AS ONE Corporation
• Hot plate maximum temperature: 250?
• Plate material: Ceramic coating
• Motor: Shaded Pole motor
• Size: 184 x 188 x 108mm
• Plate size: 175 x 160mm
• Heater: 250W
• Temperature adjustment system: Triac phase control method
• Power supply: 100VAC 50/60Hz 3A
• Power cord length: 1.8m (3P plug)
• Weight: 2.7kg
• Rotation control system: Electronic control
• Model number: HS-5BH
• Rotation speed (rpm): About 300 - 1500
• Stirred capacity (mL): 50 - 3000
• Accessories: Rotor (30mm) x 1 pc
• Since heater plate is light-alloy block inclusion, thermal efficiency andtemperature distribution is good.
• Top plate is excellent in chemical resistance with ceramic coating.
$0
Mini-Block Bath
AS ONE Corporation
• Temperature distribution accuracy: +/- 0.5? or less (at 100?)
• Temperature control system: PID control
• Timer time range: 0 - 999 seconds/0 - 999 minutes
• Temperature rise time (40? -> 100?): 15 minutes or less
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Power consumption: 35W
• Size: 120 x 152 x 112mm
• Weight: 0.85kg
• Body
• Temperature adjustment range (?): Room temperature +5 - 100
• Front lab
• *Block doesn't come with Body.
• Model number: MyBL-10
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Easy to set LCD allows user to check current temperature easily.
• It supports wide range of applications such as various reaction tests/preparation of samples because versatile blocks are provided.
$0
Hot Plate
AS ONE Corporation
• Model number: HHP-250D
• Highest temperature: 300 ?
• Plate size: 250 x 250mm
• Plate material: Aluminum
• Digital
• Temperature control system: PID control
• Temperature settings unit: -10?
• Heater capacity: 950W
• Material: Body/stainless steel (SUS304), steel (SPCC)
• Safety device: Over current fuse, internal temperature fuse, high temperature warning display function
• Power supply: 100VAC 50/60Hz
• Main unit size: 250 x 285 x 125mm
• Weight: 5kg
• Possible to accurate temperature control by PID control method.
$0
Hot Stirrer (Digital)
AS ONE Corporation
• Digital
• Temperature control system: PID control
• Temperature settings range: -50 - 250?
• Heater capacity: 300W
• Material: Plate/aluminum (fluorine resin coating), Body/stainless steel (SUS304), steel (SPCC)
• Power supply: 100VAC 50/60Hz
• Plate size: 165 x 150mm
• Main unit size: 190 x 200 x 110mm
• Weight: Approx 2.5kg
• Model number: HSH-1D
• Rotation speed (rpm): 100 - 1500
• Stirred capacity (mL): 50 - 3000 x 1
• *Stirrer bar is not included in the package.
• Precise temperature control is possible by PID temperature control system.
• Safety lamp equips at the front body, it lights on until the temperature of the top decreased to below 60.
• Plate is excel in heat resistance and chemical resistance.
• HSH-4A ? 6A ? 4D ? 6D is capable of heating ?stirring multiple solution at the same time, and can be adjusted individually with the rotational speed and the temperature.
• It is possible to control the sample temperature directly by using the (optional) external temperature sensor.
• The adoption of microcomputer rotary speed feedback control, stable rotation from low speed to high speed can be obtained.
• Digital type can be set at 1??10rpm unit.
$0
Hot Stirrer (Digital)
AS ONE Corporation
• Digital
• Temperature control system: PID control
• Temperature settings range: -50 - 250?
• Heater capacity: 180W x 4
• Material: Plate/aluminum (fluorine resin coating), Body/stainless steel (SUS304), steel (SPCC)
• Power supply: 100VAC 50/60Hz
• Plate size: 140 x 140mm
• Main unit size: 320 x 345 x 110mm
• Weight: Approx 6.5kg
• Model number: HSH-4D
• Rotation speed (rpm): 100 - 1500
• Stirred capacity (mL): 50 - 2000 x 4
• *Stirrer bar is not included in the package.
• Precise temperature control is possible by PID temperature control system.
• Safety lamp equips at the front body, it lights on until the temperature of the top decreased to below 60.
• Plate is excel in heat resistance and chemical resistance.
• HSH-4A ? 6A ? 4D ? 6D is capable of heating ?stirring multiple solution at the same time, and can be adjusted individually with the rotational speed and the temperature.
• It is possible to control the sample temperature directly by using the (optional) external temperature sensor.
• The adoption of microcomputer rotary speed feedback control, stable rotation from low speed to high speed can be obtained.
• Digital type can be set at 1??10rpm unit.
$0
Hot Stirrer (Digital)
AS ONE Corporation
• Digital
• Temperature control system: PID control
• Temperature settings range: -50 - 250?
• Heater capacity: 180W x 6
• Material: Plate/aluminum (fluorine resin coating), Body/stainless steel (SUS304), steel (SPCC)
• Power supply: 100VAC 50/60Hz
• Plate size: 140 x 140mm
• Main unit size: 480 x 345 x 110mm
• Weight: Approx 10.5kg
• Model number: HSH-6D
• Rotation speed (rpm): 100 - 1500
• Stirred capacity (mL): 50 - 2000 x 6
• *Stirrer bar is not included in the package.
• Precise temperature control is possible by PID temperature control system.
• Safety lamp equips at the front body, it lights on until the temperature of the top decreased to below 60.
• Plate is excel in heat resistance and chemical resistance.
• HSH-4A ? 6A ? 4D ? 6D is capable of heating ?stirring multiple solution at the same time, and can be adjusted individually with the rotational speed and the temperature.
• It is possible to control the sample temperature directly by using the (optional) external temperature sensor.
• The adoption of microcomputer rotary speed feedback control, stable rotation from low speed to high speed can be obtained.
• Digital type can be set at 1??10rpm unit.
$0
Overtemperature Control Device, Alarm Generator Screwed Fixed Sensor
AS ONE Corporation
• Screwed fixed sensor
• Sheath size: f4 x 30mm
• Allowable temperature limit: 180?
• M8 nut tighten specification
• When set temperature is exceeded, power supply is cut and it will not recover even after temperature drops(temperature overheat prevention function).
• Turn on separately connected alarm or lamp according to set temperature(alarm generation function).
$0
Remote Control Shamal Hot Plate (Almaite Treated Top Board)
AS ONE Corporation
• Model number: HHP-412
• Plate size: 250 x 150mm
• Plate material: Aluminum sulfuric acid anodic oxide processing
• Setting temperature: 40 - 400?
• Temperature distribution accuracy: +/- 1?
• Temperature sensor: K class thermocouple
• Power supply: 100VAC 50/60Hz
• Power cord length: 2m3P type
• Power consumption: 800W (MAX)
• Size: 350 x 305 x 107mm, Control unit/200 x 305 x 94mm
• Weight: 7.3kg, Control unit/2.9kg
• RS-485 communication function, 2 wire type, maximum 1 to 31
• Type: Remote control type (1.5m)
• *Communication converter and communication software are required separately to connect to the computer.
• Heating speed are 35minutes at 400??15minutes at 300??6minutes at 200?(25? of ambient environment).
• The timer set of 3patterns is possible.
• Preset temperature and current temperature are known at a glance by 2steps display.
$0
Fiberscope
AS ONE Corporation
• Model Number: PST-2486
• Size (mm): 100 x 450 x 200
• Imaging device: CMOS sensor
• Resolution: 640 x 480 pixels
• Focal length: 20 to 100 mm
• Light source: white LEDx 4 pieces
• Camera head diameter: f 5.5 mm
• Frame Rate: 30 fps (MAX MAX MAX MAX MAX)
• Memory: SD card (4GB)
• Analog video terminal output
• power supply: AC100V 50 / 60Hz (AC adapter attached)
• dust control waterproofing: IP 66
• Accessories: Fiber Cable 1 piece (f 5.5 mm x 1 m)
• We have a demo machine.
• Possible to confirmed with flexible cable even in back of small gap.
$0
Hot Plate
AS ONE Corporation
• Model number: EC-1200N
• Highest temperature: 300 ?
• Plate size: 400 x 300mm
• Plate material: Aluminum
• Temperature control system: PID control with auto-tuning function
• Main unit size: 450 x 350 x 133mm
• Plate material: Aluminum
• Withstand load: Approximately 15kg (however, distributed load to 80% of plate area)
• Weight: Approx 11kg
• Power supply: 100VAC 50/60Hz, maximum 1kW
• Time allowed for continuous use: 48 hours (at the time of 250?)
• Power cord length: 2m (2P plug)
• It is uniformed temperature distribution with large area hot plate that is adopted a flat plate heater as heat source.
• Timer setting of 3patterns is possible.
• EC-1200NR:Separation type of heater, temperature controller, and excellent in durability.
$0
Slide Glass Dryer Fan + Heater
AS ONE Corporation
• Material: Body/steel, melamine baking coating, Adjuster pair/ABS resin, steel, Rubber pair/EVA resin
• Drying method: Heater heating blower
• Air volume: 0.57/0.67m3/min (50/60Hz)
• Air volume control method: Fixed set (ON/OFF by switch)
• Heater control method: Analog control instrument control (with OFF function)
• Heater capacity: 150W
• Safety mechanism: Heater force interception, warning lamp lights in Internal temperature 60? or higher.
• Power supply: AC100V 50/60Hz
• Power consumption: 150W
• Power cord length: Approximately 2m (3P plug)
• Model number: SGD-HF
• Fan + heater
• Size (mm): 300 x 174 x 120
• Weight (kg): 2.6
• These products can dry glass slides sample quickly.
• Adjuster changes air blow direction.
• Hot air type(SGD-HF) can control with heat adjuster air blow temperature.
$0